What does it mean to burn headphones, what does it mean to burn headphones

Earphone burn-in means that the newly purchased earphones will only improve the sound quality of the playback after they have been powered on for a period of time.

Some components such as transistors, integrated circuits, and capacitors are unstable when they are brand new, and they can gradually stabilize after a period of use. For the earphones, the burn-in is actually in the diaphragm folding ring, the new earphone diaphragm folding ring mechanical compliance is poor, resulting in a relatively large distortion, after a period of use, the compliance gradually improves, and the distortion will gradually drop to a normal level.

New headphones, many people find that headphones need to be boiled for some time to sound better. But you must not use loud volume, big dynamics or electronic ** records, in fact, the run-in of the headphones and the car is a truth, and the slow run-in will make the mechanical part (the vibration part is equivalent to the mechanical part) get the best run-in, the crazy pot is not good for the headphones at all, and the voice coil may be deformed if the pot is not good.

Therefore, simmering and simmering has a taste, under normal circumstances, as long as it is used, it is in the oven; But a little bit is that in order to make the headphones reach the best and best state, there must be a scientific pot, that is: generally use the test disc continuously with 30-40% volume for 12-24 hours (FM** station can also be used) to rest for a day and then have a choice of continuous **different styles of CD

5-10 hours (including vocals, symphonies, electronica, pop), then choose your favorite CD and try it at a higher volume (the maximum sound pressure you can accept) for 1-2 hours, and finally return to a medium volume **soft** (such as Bandari or piano music) for 5 hours, and the burn-in process is basically complete! After that, the sound of the headphones should be relatively normal!

Generally, the first week of the new purchase is the time to burn the machine, and the sound of the relative headphones has been 95% played in a month, and the headphones that have been used for 6 months (an average of 2 hours a day) are in the best state of cooking.

The purpose of the earphone is to soften the diaphragm of the earphone, or a certain degree of aging, so that the earphone can enter the best state as soon as possible.

But there are no shortcuts to burning, and no matter what type of machine it is, it must take a certain amount of time for him to soften sufficiently. Some people don't wait for dozens of hours in a row, which not only will not have a good effect, but will cause great damage to the headphones, and it is likely to burn the headphones. Moreover, continuous long-term periods** will accelerate the aging of the diaphragm and reduce the life of the headphones.

Also, not every headset has a difference in sound after using it for a period of time, and some headphones may not have a very large diaphragm stress, so the sound is relatively stable at the beginning, even if it is used for dozens of hours, there will be no big change. If there is a change, it is also subtle, and not everyone can hear it. Different headphones take different times to stabilize the sound, some headphones may be fine for a few hours, while others may still have unstable sound after 500 hours.

Therefore, it is not recommended to burn the machine deliberately, just use it normally, don't listen to the big dynamic and loud volume at first, and wait for the diaphragm to soften, you can use it normally.

Don't let part of the life of the headphones be wasted on meaningless burn-in.

Cooking headphones is a warm-up method for the first 100 hours of work on mid-to-high-end headphones, similar to the run-in stage of a new car.

The simple way to cook headphones is to listen to the song at a relatively low volume (half the normal volume), and the song should choose a soothing type; The more professional method of cooking headphones will select the corresponding songs according to the characteristics of different headphones, and listen to them repeatedly to achieve the effect of running-in, and even audiophiles use specific frequency bands to process new headphones.

Headphones below 200 yuan, there is really no need to cook, the difference between pot and not pot is not obvious, generally more than 1,000 yuan of headphones or earbuds should pay special attention to the process of cooking headphones, the good or bad of the pot does have a great impact on the sound quality of the headphones in the later stage.

Supplement: burn-in, English name burn-in, refers to the newly purchased audio equipment has to be energized for a period of time before the sound quality of the replay will be improved. Some electronic components such as transistors, integrated circuits, and capacitors are unstable when they are brand new, and they can gradually stabilize after a period of use.

Method: Start with white noise, the volume should be slightly lower than the normal listening volume, and there is an intermittent loop** in between, with a total duration of about 20 hours. Then use the gentle **** for about ten hours.

Through the analysis of the principle of burning, the noise of the wide spectrum is a good choice, but it also has limitations, in addition to the range to meet the requirements, but the white noise or pink noise color is relatively single, and the dynamic is relatively small. **The burn-in machine certainly has great limitations in terms of vocal range, but the variety of timbre and the enhancement of dynamics make up for the weakness of wide-spectrum noise. Therefore, it is very necessary to join the ** burner, after all, we listen to the **, so that he is more excellent in the sound we like, is the best.

Cooking headphones is an artificially used way to accelerate the process of equipment entering the maturity stage. Generally, the equipment is allowed to work continuously for a certain period of time. For the power amplifier, as long as it is not turned off, it is burned, and for the headphones, it must also be fed with a certain power signal to make the diaphragm vibrate constantly.

Taking HP100 as an example, the most important component to be boiled is the internal tube, which can only be stabilized after about 100 hours of cumulative work.

The burn-in time of the earbuds depends on the type and power of the input signal. The best way to do this is to use a specialized burn-in signal (a noisy signal with a very wide spectrum) to nominal power of 2 3 without stopping for 40 50 hours, which is equivalent to the level of normal listening for 2 to 3 months.

If you use ** burning, the continuous burn-in time should not be too long, no more than 12 hours a day, and the cumulative time should be more, about 60 70 hours. For devices with tubes, it is important to note that the continuous time should not be too long, and that it should be stopped for an hour every 30 hours.

"Headphone burn-off" means: the break-in period between the speaker and the headphones.

"Burn-in" is a measure to quickly stabilize the aging of equipment. Some components such as transistors, integrated circuits, and capacitors are unstable when they are brand new, and they can gradually stabilize after a period of use.

"Burning" is a must, but not deliberate. The purpose of "burning" is to allow the equipment to enter the normal state faster, so the "burning" can be carried out during normal listening. Note that the new equipment should not accept too strong volume and style.

The role of the headphones "burn-in".

For the earphones, the burn-in is actually in the diaphragm folding ring, the new earphone diaphragm folding ring mechanical compliance is poor, resulting in a relatively large distortion, after a period of use, the compliance gradually improves, and the distortion will gradually drop to a normal level.

New headphones, many people find that headphones need to be boiled for some time to sound better. But you must not use loud volume, big dynamics or electronic ** records, in fact, the run-in of the headphones and the car is a truth, and the slow run-in will make the mechanical part (the vibration part is equivalent to the mechanical part) get the best run-in, the crazy pot is not good for the headphones at all, and the voice coil may be deformed if the pot is not good.

Earphone burn-in means that the newly bought headphones have to be powered on for a period of time, and then Yu Fan will make the sound quality of the replay better, and the newly bought headphone diaphragm is unstable, and the earphone burn-in is to improve the stability and smoothness of the diaphragm.

New headphones, many people have found that headphones need to be boiled for some time to sound better, but must not use large volume, big dynamics or electronic ** records, in fact, the run-in of headphones and cars is a truth, slowly run-in will make the mechanical part, the vibration part is equivalent to the mechanical part to get the best run-in, crazy pot is not good for headphones, if the pot is not good, the voice coil may be deformed.

Therefore, it tastes like a slow simmer, under normal circumstances, as long as it is used in the burner, but a little bit is, to make the headphones reach the best and best state, there must be a scientific pot for closing the star, that is: generally use the test disc continuously with 30-40% volume for 12-24 hours, rest for a day and then have a choice of continuous **different styles of CD.

The principle of the headphones

The headset is a pair of conversion units, which accept the signal sent by the **** device or receiver, and use the speaker close to the ear to convert the car into audible sound waves. The headphones can be separated from the **** device and can be connected with only one plug, so that you can listen to the sound alone without affecting others, and you can also isolate the sound of the surrounding environment, which is very helpful for people who use it in noisy environments such as recording studios, bars, travel, sports, etc.

Headphones were originally used for ** and radio, but with the prevalence of portable electronic devices, headphones are mostly used in mobile phones, walkmans, radios, portable video games and digital audio devices, etc., from the development of the entire audio industry, wireless headphones are still a new thing, the development time is not long, in the rising period, user demand continues to improve, user expectations for wireless headsets are also improving, this is a new test for the industry.