-
Anonymous users2024-02-05No, you can't. The IDE does not support RIAD
Unless you go for a hefty HDD adapter card!
Generally more than 800! -
-
Anonymous users2024-02-04An important prerequisite for a RAID0 array is to erase all data from the disk.
You don't want to redo the system, that's impossible.
-
Anonymous users2024-02-03First of all, does this motherboard support RAID?
Whether it supports the RAID of the IDE port or the RAID of SATA, this needs to be determined, and the others are set in the BIOS.
-
Anonymous users2024-02-02Do you do soft or hard?
Soft can be done as much as you want.
Hard wrestlers have to have a raid card.
You can't do it without a card.
I want to be a server.
I advise you not to assemble it with your hands.
Because that quality just doesn't work.
It's cheap, but it's not easy to use.
It's still a good point of the brand.
-
Anonymous users2024-02-01Now there is a kind of USB flash drive on the market that can be simulated as a floppy drive, you set the floppy drive in the BIOS to start first, put the driver in this USB flash drive, connect it, the motherboard will recognize it as a floppy disk, and you can load the driver!
-
Anonymous users2024-01-31Disk arrays that require dual hard disks are OK as long as there is a SATA port
-
Anonymous users2024-01-30RAID mainly looks at the South Bridge. The previous part was also supported by additional chips.
-
Anonymous users2024-01-29I set up an array SSD in the Z75M motherboard, got the Z77 motherboard, after setting the array on the motherboard, the two disks can be used directly, there is no reinstallation of the system, and there is no data loss. Now I have two hard drives in the M4A78 and I want to use them in the Q35 motherboard. I don't know if it's okay.
-
Anonymous users2024-01-28Are you referring to RAID?
This depends on whether the hard disk and motherboard support it
As for whether AMD motherboards support it or not.
Check your model's motherboard information to see if it supports RAID
-
Anonymous users2024-01-27RAID must be rebuilt, and it depends on whether your board can be RAID and whether it provides RAID drivers, and when reorganizing RAID you need to back up RAID content in advance and other things to restore the array.
-
Anonymous users2024-01-26Can do soft RAID (no hardware card support required).
1 hard disk as the system.
Bring 2 hard disks for RAID
-
Anonymous users2024-01-25Your chip is set up when R is in the BIOS.
Look what the house is.
There is a task in the movable house, which can be entered. >>>More
The spells of each department must be learned one by one.
When it comes to sound quality, don't choose iPod, it pays attention to multi-function, and the focus is not on sound quality. Sony's sound quality is good, but the function is not as powerful as the iPod, after all, it is a Walkman hobby, and everyone will know that Sony was the king of Walkman. A805 should be discontinued,The current one is A825,In fact, the current A820,S710,E020F series don't look at the price gap,But the sound quality is actually about the same,Among themA820The series is the most expensive,But you have to know,A820 has Bluetooth,It's also MP4,The original configuration is 082 in-ear headphones,Of course, these functions are a little more expensive,Then S710 is MP4,Noise cancellation original headphones。 >>>More
For the first use, it is best to use up the power and turn off automatically. Then rush for 12 hours, be sure to have enough. That has a longer battery life. The next charge doesn't have to be 12 hours. Hope it can help the landlord!
Mingxuan 5750 Terminator 1024M Full Public Edition Design 1024M 128bit DDR5 Video Memory Specifications Original board from ati Workmanship The quality is very good. >>>More