There is nothing left on the screen when the computer is turned on

After the computer is turned on or restarted from the computer, the start menu, taskbar, and desktop icons are gone, sometimes because of misoperation, but most of them are due to viruses in the computer, and the virus has been modified, so the start menu, taskbar and desktop icons are gone, and the processing methods are as follows:

The processing method is as follows:

Step 1: If it is accidentally removed, that is, it is misused: the solution is to disappear the desktop icon, you can:

Right-click on the desktop, select "Arrange icons" - show desktop icons", and check the display desktop icons. If you have lost the main icons such as "My Computer", "Internet Neighbor", "Internet Explorer", etc., you can right-click the desktop, select "Properties", and then select "Desktop" - "Customize Desktop", put a checkmark in front of the icons you just lost, and click OK. For the disappearance of the start menu and taskbar, you can click the control panel taskbar and start menu taskbar to automatically hide the taskbar, remove the previous checkmark, and the taskbar will appear, and tick the lock taskbar, click Apply, OK, and this taskbar will not disappear easily in the future.

Freezes, system error, system recovery reinstall.

Here's how to fix it:

1.First, right-click on the bottom shortcut bar and select [Task Manager].

2.Close the explorer.

3.Press Ctrl+Alt+Delete or Ctrl+Alt+.Open the explorer process, and then open the new task in the lower right corner.

4.Re-enter [Explorer] and click OK.

1. If you don't show the icon or the taskbar, press and hold the three keys of esc, shift, and ctrl on the keyboard

2. Find Task Manager and click on the application option in the upper left corner of Task Manager

3. Click the New Task button in the lower right corner of the program in the application options

4. Enter "explorer" in the input box to create a new task, and then click OK, and the screen will be displayed.

The explorer process did not load successfully, or it died in the background. You can try to press Ctrl+Alt+Del to bring up the Task Manager--- File --New Task--Enter C: Windows, if you still can't see the desktop, it is recommended to redo the system.

Here's how:

1. Press Ctrl+Alt+Del to bring up the task manager and create a new task.

2. Enter the following command (note the space): cmd k cc: windows system32 dllcache c: windows.

3. Then run a command again: explorer, and that's it! There's a desktop icon!

This is a manual solution, you can't choose it every time, take a look at the method below! After turning on the computer there was still nothing, only the desktop background I set!!

Hehe! This is because the process is still not running! You do what I say!

Friend! Three-button press to open Task Manager! File - New Task - Make sure you have the desktop at this point!

And then you're following the settings I said below! You don't have to set it up every time you turn it on!

Here's how:

First, add the explorer to the process: start menu run type "regedit", press enter open the hkey current user software microsoft windows currentversion run key in the registry, and create a new string value named " under this key, the value, the data is the location of your system.

Second, cancel the boot project start menu Run Enter "msconfig", press enter in the Startup tab, find the corresponding value of that installer (if you don't know, remove all the unnecessary ones), remove the previous " " " to save, and exit. Restart the computer,There is also a kind of desktop does not display icons,But there is a start taskbar,This may be to display the desktop icon item,The solution is:

Right-click on the desktop --- arrange the icons --- display the desktop icons Select it!

Right-click on the desktop --- Properties--- Desktop (Label) - Customize the desktop--- check the required display items in front of the button, and apply OK.

Right-click on the desktop to display all icons. Give it a try! If not, reinstall the system!

Sometimes it's too stuck, wait and see, refresh and refresh, restart and see.

It could be a system setting, or it could be a corrupted system registry.

It may be poisoned, and you need to reinstall the system or ghost with one click

Right-click first and then restore the main interface.

1. If you don't show the icon or the taskbar, press and hold the three keys of esc, shift, and ctrl on the keyboard, and these three keys should be pressed at the same time, which should be the task manager;

2. Find Task Manager and click on the Application option in the upper left corner of Task Manager;

3. Click the New Task button in the lower right corner of the program in the application options

4. Enter "explorer" in the input box to create a new task, and then click OK, and the screen will be displayed.

Problem Analysis:

There are two situations when the computer is turned on and the display does not respond: the screen is not powered on (the power indicator is not on) or the screen is powered on but there is no signal or the display "no sighal", the former indicates that the power is not on or the power cord is not in contact or damaged, and the latter is generally the memory module or monitor data cable is not in good contact, or the memory, graphics card, monitor or data cable is damaged.

Handling suggestions:1If the monitor is powered on but no signal is displayed, turn it off (if the short press of the power switch is invalid, press and hold the switch until the power indicator goes out or directly unplug the power cord), turn on the chassis after powering off, replug the memory module, and wipe the gold finger with an eraser in one direction (the back of the thumb fingernail is also fine), and then turn on the power after installation (before operation, you should also touch the wall with both hands to release your static electricity or wear anti-static gloves). If you can't do it, then it's simpler:

Palm or kick the chassis can be done (pay attention to the location: the front of the shell on the left and right sides of the chassis without an interface on the back of the shell; Attention Tract: Don't push too hard).

The above may need to be repeated, and if it doesn't work, you need to replace the memory module. If you have more than two memory modules, you need to test them one by one.

2.If the above operations do not work, turn off the power and turn on the chassis, reinsert the graphics card, and plug in the data cable between the monitor and the graphics card. If it still doesn't work, consider that the cable or graphics card is damaged, then replace it with a new one.

3.If the monitor is not powered on (the indicator light is not on), check whether the power switch is turned on, then check the back of the monitor, plug the power cord connected to the monitor upwards (the power cord can be replaced if possible), and check whether the other end of the power cord is powered on to the outlet.

4.If the display can be displayed when connected to another monitor or the display of this machine is connected to another normal host and still cannot be displayed, it means that the monitor is damaged and needs professional repair.

Answer: The solution to the computer is turned on normally but the screen is not screened: 1. Check whether the power cord of the computer is connected; 2. Check whether there is any excess metal in the main chassis or observe whether the motherboard is in contact with the chassis; 3. Maintain the power switch line; 4. Replace the power supply.

The icon disappears when the question is turned on. I can open the background, but the desktop does not show it.

Ask a desktop wallpaper.

Questions are only displayed in the run bar, there is nothing on the desktop.

Answer 1: If the fault persists, open the task manager (press the "Ctrl+Alt+del" key combination to open), click "File" and "New Task", enter "explorer" in the "Create New Task" dialog box that opens, click the "OK" button, and wait a while to see the desktop icon.

The screen went black directly after the question key combination.

Questions are lit up.

The CPU pinhole is golden, blow it hard, the pump can be cleaned up, and other hardware is also cleaned, especially the graphics card.

Good luck.

Unplug the graphics card and plug it back in.

After booting the computer, call the task manager, run it through ctre+alt+del, and you can see the desktop.

This is because there is no thread to load the desktop when the computer is turned on. The reason is probably Rising's problem... Moreover, the users who have come up with this problem recently are all Rising users, and some people on Rising's jar have reacted many times.

1.Can I see the Start Menu? If you can, just type "explorer" in the runtime, if not, use the task manager, click File - New Task, type "explorer", so that you can see the desktop for the time being.

Or you can call up the task manager and log out.

2.Enter regedit in the "start" and "run" fields, start the registry, find the following path, if there is no one under the shell, then right-click yourself to create a new one.

I think the reason is probably because the processes in the system are not loaded with independent threads when the machine is booted: independent processes and shared processes. Recently, I have had such a problem with my machine...

Of course it could also be because, the corruption you try to repair with srengps. If you don't, pass it on to you. o(∩_

Hold down the Ctrl+Alt+Del keys to open the Task Manager, enter explorer in File - New Task, and press Enter.

Right-click - Arrange icons - Show icons on the desktop and you should be good to go.