-
Cause of the failure system First, try all of the following solutions.
The first type of system problem is to go back to the original or redo the system with one click.
The second type of software problem is to reinstall the software under it.
The third software virus residual file cleans up the memory.
Fourth, the software is incompatible with the software.
Fifth, the cache settings are not reasonable, and the cache is reset.
Sixth, the system is short of resources, and the memory is deleted and cleaned up.
The seventh type of virus, Trojan horse detection and killing virus.
Eighth, the hardware is overheating, the CPU is too hot, and the heatsink is too dusty.
The ninth hard drive problem is to clean up the disk. Defragment the disk.
The tenth type of hardware quality hardware should be jumped.
The eleventh type of hardware overclocking is to de-energize the battery.
The twelfth type is that the hardware environment is incompatible and re-replaced.
Only lift the arch solution. No explanation is given.
1: To boot the computer, restore the BIOS to its factory state. (Battery de-energized) is more critical and must be done.
2: Restart your computer. Enter the system or safe mode (press F8 to select 1 when booting up.)
Choose 2 to access the Internet).
3: You copy the following command or in. Command Prompt Input:
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
4: Update the graphics card drivers. Restart your computer. Do a comprehensive antivirus.
Then do the following four points faster on the computer.
The first is to close all startup items. (msconfig) in Run (tick) ctfmon
and anti-virus software.
The second is to empty the ** station. The system needs to clear IE temporary files and records. Delete your own use.
Patch files. Third, set up a firewall. Right-click on properties on my computer. Point System Restore. (tick).
Fourth, turn off System Restore on all drives. Turn off automatic updates. Open the Advanced System Properties dialog box, click Settings in the Startup and Recovery area on the Advanced tab of the System Properties dialog box, and uncheck Auto Restart in the Startup and Recovery dialog box.
In the Advanced tab, click the dot Error Reporting and the dot Disable Error Reporting
-
If you don't want to wait, you have to clean up the program that was loaded at boot boot, you are because there are too many boot boot items, causing the system to be busy, and when the system finishes processing these things, there will be time to respond to your request. In fact, many people have this problem, mainly to see if the system will be maintained.
-
Hover over the taskbar, right-click, and select Lock taskbar.
-
That's because you have too much software installed, and there are many automatic startups at startup, so you can optimize the boot program.
-
If you don't respond to clicking on the taskbar, it may be a system problem or temporary fake death. The solution is as follows: 1. If there is no response when clicking on the taskbar, press the CTRL plus ALT and DEL keys on the keyboard; 3. Click on the process, find it here, and then click on the end process below; 4. Click on the file again, create a new task (run) and then enter, click OK The desktop is back after reinstalling the computer system, it actually appeared:
Clicking on the software icon on the computer's taskbar does not respond, and you can't even click on the start menu, but clicking on the software icon on the desktop can be used. What's going on? Analysis:
It is possible that there is a system issue that is causing temporary suspended animation. Maybe you have encountered a similar problem, then, let's take a look at the following tutorial, test it yourself, the problem has been solved. The tutorials are divided into:
Win7 system and XP system, I hope it can help you!
In the Windows series of systems, the taskbar refers to a small bar located at the bottom of the desktop, which is mainly composed of the start menu, the quick launch bar, the application area, the language options strip and the tray area, while the taskbar of the Windows 7 system has the function of "showing the desktop".
Win7 Solution:
1.If there is no response when we click on the taskbar, we press "Ctrl+Alt+del" on the keyboard;
2.Then in the [Start Task Manager] that opens, you will see all the processes as shown below:
Launch Task Manager.
3.Now we click on [Process] to find [and then click on [End Process] below:
End the process. 4.In this way, your computer desktop will be puzzled, we now click [File] [New Task (Run)] and then enter "Click [OK] The desktop is back:
Create a task. XP Solutions.
1.Also on the computer, [Start], find [Settings], and then I click on it to enter the [Control Panel].
Control panel. 2.In the [Control Panel] that opens, we find [Date, Time, Language and Locale] and double-click it to enter:
Control panel. 3.To pick up the station, we click on the [Language] dialog box:
Language dialog box.
4.In the [Region and Language Options] that opens, we double-click [Details] [Advanced] as shown in the following figure:
Regional and language options.
5.Now we select [Turn off advanced text service] and then click [OK] as shown in the figure below
Turn off the advanced text service.
6.Then we click [Details] [Advanced] under [Text Service and Input Language] as shown in the following figure:
Text service and input language.
7.Next, we uncheck [Disable Advanced Text Service] and then click the [OK] button.
Turn off the advanced text service.
-
Win10 bottom taskbar does not respond to restart invalid operation method:
Tools Ingredients: Huawei MateBook, Windows 10, Local Settings 1, press the "Ctrl+Alt+Delete" key to open the task manager.
2. First, click [Name] in the first column to sort by name, so that the process name remains unchanged in the list.
3. Find a process called "Windows Explorer" below, click Restart in the lower right corner, and wait a few seconds to solve the problem.
-
Summary. Hello dear, happy to answer for you:
The taskbar at the bottom of the computer does not move.
Solution 1: Restart [Windows Explorer] Press the keyboard combination [Ctrl+Alt+del] to open [Task Manager], switch to the [Process] tab, and select [Win.].
2.At this point, you will run the Windows PowerShell program as an administrator, copy and paste the following command into the command prompt interface, and press enter to execute:
Finally, wait patiently for the completion of the [System Deployment Process] operation, the whole process will take about 2 to 10 minutes. Finally, you can try to right-click on the taskbar to perform other related operations;
After turning on, the taskbar below does not respond.
Hello, I am helping you to inquire about the relevant information and will reply to you immediately.
Dear, I'm glad to answer for you: The taskbar at the bottom of the computer does not move Solution 1: Restart [Windows Explorer] Directly press the keyboard combination [Ctrl+Alt+del] to open the [Task Manager], switch to the [Process] tab, and select [Win.].
1.In the search box of the system, enter [PowerShell] search, find this tool from the search results, and right-click the option to [Run as administrator]; 2.At this point, you will run the Windows PowerShell program as an administrator, copy and paste the following command into the command prompt interface, and press enter to execute:
Finally, wait patiently for the completion of the [System Deployment Process] operation, the whole process will take about 2 to 10 minutes. Finally, you can try to right-click on the taskbar to perform other related operations;
I hope I can help you, I wish you a happy life and a smooth work!
Method 1. 1. Right-click on the toolbar -- remove the lock in front of the taskbar. >>>More
If you leave too little space for the system disk, it will cause the system to run slowly, and the best solution is to reinstall the system and give the system a large amount of space! If you don't want to reinstall the system, uninstall the software installed in the system disk and install it on other disks, or you can make the virtual memory smaller or simply set it in other disks (how to set up the virtual memory can be searched on the know, I won't talk about it here, hehe....)You can also right-click on the C drive, select Properties, there is a disk cleanup inside, follow the prompts, clear some junk files, this will also expand the space!
Right-click property on the desktop online neighbor. Find the right-click attribute of local connection 2 and remove the bottom two checks.