Tissot T063637A how to adjust the perpetual calendar

1. How to adjust the mechanical watch:

1. The handle in the middle is screwed like a screw, according to the waterproof design of the counter, when adjusting the time, it is screwed downwards counterclockwise, and it is loosened like a teacup lid.

2. After unscrewing, it is screwed directly upwards in 0 gear, and it is manually wound. (If you buy a new watch or have not worn it for a long time, please manually wind it for 30 turns when you wear it again, so as to ensure the energy of the watch, which is usually not needed).

3 pull lightly, and it is 1 gear to screw up to adjust the day, and to screw down to adjust the calendar.

4 in the pull, is 2 gears can adjust the time.

Second, how to adjust the quartz watch:

1 For a calendar watch, when the seconds run to 12 o'clock, pull out the stem and rotate clockwise to adjust the time. If there are no seconds, you can adjust the minute hand to the first two minutes of the time you want to adjust the time, and then push it back to the shank after adjusting the time.

2 For watches with a calendar, pull out the handle a little, you can adjust the day clockwise, adjust the date counterclockwise, pull the handle to the outermost, you can adjust the time, the specific operation is the same as the watch without a calendar.

Are you sure yours is the perpetual calendar, don't think about it yourself, this is a lot of counters will not, to get the maintenance point, adjust well, don't mess with your own in the future, within 100 years the date and date will press the correct jump.

Adjustment of time.

When calibrating the time, if you want the time to be fairly precise, first bring the second hand to 12 o'clock and pull out the crown to the second stop, at which point the second hand is stationary, turn the crown clockwise or counterclockwise to adjust the position of the hour and minute hands, and push the crown back when the hands coincide with the standard time (with reference to a television or radio).

Adjustments to the calendar.

Pull the crown outwards to the first position and adjust the date by turning the crown clockwise (or counterclockwise if there is no day of the week).

Adjustments to the Day-Date watch.

Pull the crown outwards to the first position, turn the crown counterclockwise to adjust the day of the week, and turn clockwise to adjust the date.

Tissot watch model T035627A is divided into two gears, the first gear is to adjust the date, the second gear is to adjust the time, when adjusting the date you need to adjust the time to the 7 o'clock position, so as to avoid the situation of stuck, the specific operation steps are as follows:

1. Pull the watch handle outward.

2. Adjust the watch hand to the 7 o'clock position.

3. Turn the first gear clockwise on the watch to adjust the date.

4. Adjust the time in the second gear of the watch handle.

5. After the adjustment is completed, press and hold the watch handle to the bottom to complete the adjustment operation.

Hold the watch in your left hand, with the dial facing you and the 12 o'clock position facing up, and turn the crown with your right hand, and the crown needs to be pulled out, which is divided into two positions (please note the force).

1st gear (slightly pulled): Thumbs up to rotate the crown (clockwise) - Adjust the date Thumbs down to rotate the crown (counterclockwise) - Adjust Tuesday gear (fully pulled): Thumb to rotate the crown --- Adjust time precautions.

It is not advisable to manually adjust the watch between 9 o'clock and 3 o'clock.

Because this period is the running time of the calendar function, manually adjusting the watch is easy to cause gear damage, so avoid this time, and wait for the calendar to jump before manually adjusting the watch, otherwise it will cause wear and tear on your watch.

Suggestion: Adjust the calendar to the previous day, pull out the crown to the second position (fully unplugged), rotate the crown all the way up (clockwise), wait for 24 hours after the clock hand turns the calendar to automatically jump to the correct date, and then continue to adjust the correct time today.

Tissot T035627A is a Tissot Kuto mechanical men's watch powered by the ETA automatic chronograph movement.

The time and calendar adjustments are as follows:

1. Pull the crown (handle) out to the first grid, and turn the crown clockwise to adjust the date;

2. Pull out to the second grid and adjust the time. Clockwise or counterclockwise is acceptable.

It is best not to adjust the calendar and time at this time until 2 a.m. There is damage to the movement.

The small dial at the point position is the normal running seconds hand, and the second hand is the chronograph seconds hand of the chronograph.

The small dial at the o'clock position is the chronograph minute counter of the chronograph, and at 6 o'clock is the chronograph hour counter of the chronograph.

Press the upper right button to start the chronograph, and the second hand, small dial minutes, and hours start moving. Press it again to stop the timer, and the lower right button is the reset button.

1.Loosen the strings counterclockwise [this one you will definitely have].

2.Pull out three squares (drag to the bottom) to adjust the date.

3.If you want to adjust the week, there are so many statements on the Internet, I have tried to be inaccurate. In fact, pull out three squares, push back a little bit, and then you can adjust the day of the week clockwise and counterclockwise, turn it gently, and the day of the week will change.

4.Reposition. Note Do not adjust the date around midnight, the average person will not play the watch so late.

Tissot T035617A stopwatch: press the B button to reset the stopwatch to guess the chaos.

Tissot T035617A stopwatch checks the stopwatch second hand, the bottom bezel hand, and the large dial second hand, the longest hand is like the second hand of an ordinary watch, and the position is pointing to 12 o'clock.

Notes on the stopwatch:

Check that the second hand of the small disc is pointing to 12, and if so, perform the 5 steps. If not to point to 12. At this time, press the B button, press it one at a time, and the second hand will turn to point to 12 to adjust. Point to 12 and you're good to go.

Once you've made the required adjustments, push the watch handle (crown) inwards into place. When the crown is pulled out, the time walk will also stop, so please re-adjust the time after completing the stopwatch adjustment described above.

Summary. Hello dear, happy to answer for you. 1.

The handle of a Tissot watch is divided into two gears, the first step of the Tissot watch is pulled out to adjust the date, and the first stop is pulled out to adjust the time. 2.When adjusting the date, it is advisable to stay at 7 o'clock after pulling out the hour hand, so that the Tissot watch does not jam and does not damage the movement.

3.Pull the watch handle outward by one setting to adjust the date, and if you want to adjust the time, simply pull it out one more step and do not operate between 9 p.m. and 3 a.m. 4.

During this time, the calendar function is in operation, and it is also a time when the gear toothing is low, and frequent movements can damage the internal parts of the watch.

Hello dear, happy to answer for you. 1.The handle of a Tissot watch is divided into two gears, the first step of the Tissot watch is pulled out to adjust the date, and the first gear is pulled out to adjust the time.

2.When adjusting the date, it is advisable to stay at 7 o'clock after pulling out the hour hand, so that the Tissot watch does not jam and does not damage the movement. 3.

Pull the watch handle outward by one setting to adjust the date, and if you want to adjust the time, simply pull it out one more step and do not operate between 9 p.m. and 3 a.m. 4.During this period, the calendar function was in operation, and at the same time, the gear toothing was low, and frequent movements could damage the internal parts of the watch.

Date: The handle of a Tissot watch is pulled out of the first position to adjust the date cover, and it is recommended to stay at 7 o'clock after dialing the hour hand when adjusting the date. Because it is said that this operation will not allow the Tissot watch to be too jammed to die, and it will not cause damage to the suffocating movement in the Tissot watch hall, etc., then the date can be adjusted by pulling the watch handle outward by one stop.

Tissot watch model T035627A is divided into two gears, the first gear is to adjust the date, the second gear is to adjust the time, when adjusting the date you need to adjust the time to the 7 o'clock position, so as to avoid the situation of stuck, the specific operation steps are as follows:

1 First, pull the handle on the right side of the watch outward, as shown in the figure below.

2 Then, adjust the pointer to the 7 o'clock position.

3 Next, turn the crown one step clockwise to adjust the date.

4 Adjust the time of the second position of the crown.

5 Finally, after the adjustment is completed, press the watch handle on the right side to the end to complete the adjustment operation.

The watch model is not complete, T035 is a sports watch with a black belt.

The manual should be in the box, or the salesperson gave you the wrong one, there are 7 kinds of Tissot manuals.

There are 4 rings on the watch.

I don't need to say the direction at 3 o'clock...

At 6 o'clock, the timer is up to 6 hours. （a）

At 9 o'clock, seconds.

At 0 o'clock, the timer is up to 30 minutes. （b）

The outer ring tachymetre The average speed of a high-speed moving object running 1kg, which is basically useless, will not tell you in detail.

This watch is mainly on the timing function, 2 buttons on the right side of the watch, 1 spiral knob, the upper button (a) function is the start and end of the timer, the lower button (b) is 3 chronograph counters to zero, you should know the middle spiral.

The guy who looks like a second hand is not a second hand, it's a chronograph hand.

In the case that the chronograph hand is in the direction of 12 o'clock (this is the zero state, if he is not in the direction of 12 o'clock, ask me again, I tell you, a little complicated), press the button A on the upper right of the dial, the chronograph hand will start to rotate, for example, you run 100 meters at the end, press A again, if you take 10 minutes and 25 seconds, the chronograph dial B will point to 10 (the circle in the direction of 0 o'clock, there is a scale on it to see from a ha), the chronograph hand (that is, the original second hand) will point to 25 (the large grid of your own outer circle. Then if you want to keep running, you can press A again, and it will start timing again, but it won't clear and re-time, it will continue to time on the basis of your last timer, and if you don't play, press B, and it will return to zero. (Dial A, it's the same as B, but the timer is more than 30 minutes, and it will move, try it yourself, but it's generally useless.) ）

Press the upper right button first to see if you can stop the watch, and then press the reset button at the lower right to return to normal time.

Don't believe these, and work hard to experience **and**.

2. After the page jumps, enter the **, click on customer service, and select the user manual to enter.

3. Click on the user manual to enter after the page jumps.

4. In the query user manual interface that appears, you can see that you need to enter the code of the watch. At the same time, the page gives the way to view the watch code.

5. At this time, find the T035627 code of its mark on the back cover of the watch.

6. Enter the watch code T035627 in ** and click the query button.

7. Then click on the language in the lower right corner and select Chinese Simplified.

8. At this time, after the page jumps, you can see the Tissot 1853T035627A manual.

9. Continue to scroll down the page to see the corresponding usage method.

Summary. Hello, it is a pleasure to serve you and give you the following answers: to adjust the time of Tissot T035246A watch, you must first determine the power source of the watch, if it is battery-driven, you can adjust the time by toggling the time adjustment button; In the case of an automatic watch, the time can be adjusted by toggling the time adjustment button, but be careful not to toggle the time adjustment button too much to avoid damaging the movement.

The steps to adjust the time are as follows:1Open the cover of the watch and toggle the time adjustment button to adjust the time; 2.

In the case of an automatic watch, the time can be adjusted by toggling the time adjustment button, but be careful not to toggle the time adjustment button too much to avoid damaging the movement. 3.Close the cover and check if the time is correct; 4.If the time is incorrect, repeat the above steps until the time is correct.

Personal tip: Adjusting the time of the watch is a simple thing, but be careful not to dial the time adjustment button too much to avoid damaging the movement.

Hello Cha Kai, I am happy to serve you, and make the following answer for you: to adjust the time of Tissot T035246A watch, first of all, to determine the power source of the watch, if it is battery-driven, you can adjust the time by toggling the time adjustment button; In the case of an automatic watch, the time can be adjusted by toggling the time adjustment button, but be careful not to toggle the time adjustment button too much to avoid damaging the movement. The steps to adjust the time are as follows:

1.Open the cover of the watch and toggle the time adjustment button to adjust the time; 2.If it is an automatic watch, the time can be adjusted by the bucket and the toggle time adjustment button, but be careful not to toggle the time adjustment button too much, so as not to damage the movement; 3.

Close the cover and check if the time is correct; 4.If the time is incorrect, repeat the above steps until the time is correct. Personal Experience:

Adjusting the time of the watch is a simple matter, but be careful not to dial the time adjustment button too much so as not to damage the movement.

You've done a great job! Can you elaborate on that?

Hello Cha Kai, I am happy to serve you, and make the following answer for you: to adjust the time of Tissot T035246A watch, first of all, to determine the power source of the watch, if it is battery-driven, you can adjust the time by toggling the time adjustment button; In the case of an automatic watch, the time can be adjusted by toggling the time adjustment button, but be careful not to toggle the time adjustment button too much to avoid damaging the movement. The steps to adjust the time are as follows:

1.Open the cover of the watch and toggle the time adjustment button to adjust the time; 2.If it is an automatic watch, the time can be adjusted by the bucket and the toggle time adjustment button, but be careful not to toggle the time adjustment button too much, so as not to damage the movement; 3.

Close the cover and check if the time is correct; 4.If the time is incorrect, repeat the above steps until the time is correct. Personal Experience:

Adjusting the time of the watch is a simple matter, but be careful not to dial the time adjustment button too much so as not to damage the movement.