What should I do if the juice is spilled on the notebook?

The construction of a desktop keyboard is not the same as that of a laptop keyboard. The ultra-thin keyboard used in laptops has small key contacts that are coated with conductive glue that triggers an electrical pulse with each press. If the key contacts seep water, the conductive adhesive dissolves, and the keys will naturally fail.

In addition, the circuit integration of notebook computer keyboards is very high, and maintenance requires very professional equipment, so most manufacturers will use direct replacement maintenance methods to reduce maintenance costs and shorten maintenance time. In addition, the structure of the laptop is very compact and compact, and the core circuit part of the computer is under the keyboard, and once water seeps through the keyboard, the consequences are even more unpredictable. So you must be extra careful when using your laptop.

A drop of water has the potential to cost you dearly.

If you accidentally splash water on the keyboard, you should turn the machine upside down as soon as possible to prevent water from flowing into the motherboard and causing catastrophic consequences. Then unplug the power and the battery to forcibly shut down, just simply press the power switch to forcibly shut down is not enough, because the main battery may still be short-circuited, so be sure to remove the battery and disconnect the power adapter.

Then use a dry cloth to absorb the water on the surface of the keyboard, try to remove the keyboard to wipe the water on the back, and then dry it in the shade (it is best not to use hot air to blow), and at the same time, it is best to use cold air to blow the inside of the host for a day, otherwise it may be a wisp of green smoke on the west sky.

After the water is dry, if you find that some of the keys are out of order, please check again whether the water on the keyboard has dried out, focusing on checking the position of the keyboard to lead out of the wiring, generally speaking, the current laptop keyboard will not be completely finished because of a soaking in water, as long as the cleaning method is still very hopeful.

Also, if your keyboard is dirty and needs to be cleaned up, buy a good brush that won't bleed, turn off the laptop and stand it on its side, and then carefully clean the gaps in the keyboard. Keep the brush dry and free of water! When you're done, add a bowl of water and a drop of dish soap, moisten it with a cotton cloth and wring it out to clean the surface of the keyboard, and then dry it and you're ready to use.

Article source: Computer enthusiasts.

The notebook is flooded, this topic may not be considered by everyone, who will have nothing to do with splashing water on the notebook. In fact, often before you know it, tragedy may happen, or due to humid environment, etc., the laptop is also more susceptible to moisture. It can lead to the failure of some functions, and the damage to the hardware of the notebook, how should we deal with this situation?

Let me show you some simple methods.

1. Immediately remove the power supply and battery of the laptop, and remove any external or replaceable module parts (such as optical drives, hard disks, floppy drives, expanded memory, etc.).

2. Never turn it on again, otherwise it will cause more serious damage to the laptop.

3. Pour as much water as possible in the laptop and send it to the service station for processing by a trained professional engineer as soon as possible, so as to minimize the damage.

If the conditions do not allow and the service station cannot be contacted in time, a list of emergency measures can be taken before being sent to the service station for processing. ）

4. Find a soft wet paper towel or soft cloth to gently wipe off the stain and try to avoid abrasion of the surface.

5. Use a hair dryer to dry the body and parts, please pay attention to keep the hair dryer at a certain distance from the body to avoid damage to the components due to high temperature.

If you didn't clean up as mentioned above, then you could only replace the parts as you did, good luck

Power. Invert the empty water.

Air dry in a cool place.

But if it is a substance such as a drink, it is more troublesome, disassemble the keyboard cleaning button before air drying, pay attention to just clean the removed button, and wipe the part that cannot be cleaned with a dry rag and assemble it after air drying. However, if it has burned out at the moment of contact with water or has encountered a beverage that has caused poor contact, you have to consider repairs or replacements.

Send it for repair, maybe the juice seeped into the board.

Ah, the door is changing to a new one, and it's not worth much money now.

Power off unpacked.

Wipe with a rag.

Water and green tea are the easiest to handle, especially a little bit and easy to get; But sugary drinks are a bit more of a hassle. Because the drink will leave residue when it dries, the more residue there is, the greater the risk. If the rest of the laptop works, it's much easier to get a new keyboard than to clean it up.

When a drink is spilled on the laptop, the first step is to unplug it immediately and quickly remove the battery. This reduces circuit damage. If the battery is sealed, it is best to turn it off. Also, turn the laptop upside down to avoid liquid touching the motherboard.

Next, it is natural that you will wipe off the drink with what you have at hand, but many people do not have a non-woven fabric or disinfectant cloth, in fact, a clean handkerchief can also be used. If none of these are available, tissue tissue tissue paper can be used. Use a dip instead of a wipe, and remember that rags and tissue paper can also leave residue.

If you spill too much of a drink, tilt your laptop against the air outlet and shake it gently to let the liquid out. Then you can remove the bottom cover, take out the hard drive, and be careful not to touch the circuit. (Masters can wear antistatic wrist straps).

If the drink contains sugar, such as milk and sugar, then wipe it with a damp non-woven cloth.

After doing these things, hold the laptop against a ventilated place for at least 1 day, preferably 2 days. Don't use a hair dryer as this will blow hot dust into a sticky environment.

Do not turn on the laptop after it gets into water, otherwise it will make the damage of the laptop more serious. Immediately remove the power cord and battery of the laptop, and remove any external or removable module parts (such as optical drive, floppy drive). Drain the sewage from the laptop and gently wipe off the sludge with a soft wet paper towel or cloth to avoid abrasion of the surface.

Then use an electric fan to dry the body and parts, do not disassemble it by yourself, and send it to a professional maintenance station for inspection and maintenance in the first time, so as to minimize the damage to the program. Don't try to turn on the machine after seeing the body run out of water, see if it burns out, there are many machines that just burn as soon as you try it, it's no problem, it's a failure!

In fact, after the machine enters the water, the most easily damaged is the keyboard, because the keyboard is closely bonded by several layers of circuits similar to plastic film, and it is difficult to volatilize the water after entering, and the existence of water can easily lead to short circuits, corrosion circuits, etc., so, after the machine enters the water, you must find professionals to test, don't be lucky, think that it's okay, just when you think the machine is fine, the keyboard is not working!

Do not turn on the machine so as not to enter the motherboard, burn out the motherboard and other hardware, etc., you can go to the repair department for repair.

Don't use it, wait for the traffic to be repaired, don't open it, it will electrocute.