Where is the cold spray zinc coating company good?

Cold spray zinc paint is also good, cold spray zinc paint is also good. In fact, their role is the same, but the way they operate is different. The anti-corrosion ability of cold-sprayed zinc coatings depends on the level of zinc content, because limited by technical support, the zinc content of cold-sprayed zinc is currently only 96%.

There are also many cold-jet zinc manufacturers on the market, and the products they produce are labeled as 96%, or even above, but they are not so high. We all know that when millet cooks porridge, if you put too much water, the porridge will be thin, and its principle is also applicable to paint products. Cold-sprayed zinc has a higher zinc content and will become more viscous.

In this regard, several large domestic manufacturers have paid attention to Haozhisheng's zinc easy generation cold spray zinc series is doing very well, you can refer to it.

Cold spray zinc coating is a one-component zinc-rich coating with high zinc content, which is a galvanized coating formulated by three parts: zinc powder, volatile solvent and organic resin with higher purity. Compared to other two-component zinc-rich coatings or other one-component products, the zinc content in cold spray zinc coatings is extremely high (more than 96% zinc in the dry film).

Cold spray zinc coating can be widely used in the rust prevention of iron structures and the repair and maintenance of galvanized components.

1. All kinds of large-scale steel structures and metal components.

Use Cases: Civil engineering: bridges, viaducts, guardrails, fences, marking posts, rebar.

Construction: Pipes for gas, waterways, structures, etc., steel frame structures, temporary football fields, handrails, safety fences, stairs, scaffolding, iron window frames for construction, and multi-story parking lots.

Electric power and communications: scaffolding for iron towers, iron pillars, power equipment, metal parts, various antennas, transformer frames, and wire iron structures.

Ship fishery: refrigeration equipment, anchors, locks, fish lights, buoys, oil storage tanks, various assembly metal appliances, piping metal appliances.

Environmental sanitation: environmental sanitation equipment, incinerators, various barrels and tanks.

Agricultural horticulture: greenhouses, silos, chicken coops, agricultural installation structures, irrigation pipes, agricultural machinery.

2. Maintenance of old hot-dip galvanized steel structures and galvanized parts.

3. Repair of the cutting surface, welding point, and detachment of galvanized steel stripping, etc.

Cold spray zinc coating company can pay attention to Zinc Shield Technology has focused on the field of industrial heavy anti-corrosion for 16 years, and is committed to providing professional, efficient and customized anti-corrosion solutions for the industry's "long-life anti-corrosion" topic. Zindun has passed the intellectual property management system certification, ISO9001 quality management system, ISO14001 environmental management system, OHSAS18001 occupational health and safety management system certification, and the industrial coating production capacity has reached more than 12,000 tons. The products of cold spray zinc coating company zinc shield technology have been widely used in hundreds of electric power, bridge, petrochemical, marine and municipal industry projects at home and abroad.

The anti-corrosion effect of zinc shield cold spray zinc has also been tested by the market, and zinc shield technology products have provided long-term, green and reliable steel protection for more than 2,000 projects. In Dingzhou Power Plant, Ninghai Power Plant and other projects, compared with the foreign brand coating that was constructed at the same time in the same corrosive environment in the same area for 13 years, it has reduced 2 anti-corrosion overhauls and effectively solved the problems of bolt holes, friction surfaces and weld corrosion, hard-core technology, and created value for customers.

There are cold spray zinc that are not applauded in China, and they have cooperated. Cold-sprayed zinc: The purity of zinc powder is above, the particle size of zinc powder is 3-6 m, and the dry film zinc content is 96%, which creates the excellent anti-corrosion performance of cold-applied zinc coating on steel.

Alternative to hot-dip galvanizing. The adhesion is extremely strong, and the adhesion of Hunan Deqian cold spray zinc scribing method is grade 1, and the opening method is tested at 5-12MPa. There is a cold spray zinc sister in Changsha who is very professional:

135, the middle four digits are 4875, and the last four digits are 5867] to consult her about the characteristics of cold spray zinc, the use method, and the anti-corrosion period are very patient, mainly because it is suitable, and the plan she does saves costs, you can try it, their company has many achievements, subways, high-speed railways, bridges, power plants, you can refer to it, rest assured! Suggestion!

Cold spray zinc or find a few professional production of cold spray zinc manufacturers more reliable, the current professional cold spray zinc manufacturers are Japan's Robaru, Belgium's zinc, Wuxi zinc shield and so on. The others are not imitations, but they are produced by applying the concept of cold spray zinc.

Summary. There are two types of cold plate spraying, one is spray plastic and the other is spray paint, in fact, it is a spray plastic and a baking paint. To achieve the same effect, the spraying is cheap, and it is wear-resistant and corrosion-resistant.

Paints for the surface of galvanized sheets require the use of special coatings to ensure excellent adhesion and protection. Ordinary paints, such as polyurethane paint, propylvoreticol paint, zinc-rich primer, etc., are difficult to adhere to the metal surface, easy to peel off the paint, and cannot achieve the effect of anti-corrosion decoration at all.

There are two types of cold plate spraying, one is spray plastic, the other is spray paint, in fact, the front burial is a cover spray plastic and a baking paint. Yinmin ants achieve the same effect, sprayed plastic is cheap, and it is wear-resistant and corrosion-resistant.

Normally, galvanized sheet spraying is a little better.

I want to ask about galvanized sheet spraying, no pickling phosphating, can you spray plastic directly, thank you.

It didn't work that well.

It is advisable not to save.

Summary. Hello, galvanized sheet refers to a steel plate with a layer of zinc on the surface, galvanizing is an economical and effective anti-corrosion method that is often adopted! Cold plate is the abbreviation for cold rolled steel plate.

The base material of cold-rolled plate is hot-rolled steel plate, which is generally relatively thin and thick. The surface is bright and flat. Kind of like stainless steel.

Galvanized sheet is a kind of pipe with acid resistance, rust resistance, corrosion resistance, light material and long service life, and the appearance of galvanized sheet is also more beautiful, so many galvanized sheet manufacturers have also taken a fancy to its advantages, increase production, and the application of galvanized sheet is more and more extensive. Thank you for visiting and have a great day.

Hello, galvanized sheet refers to a steel plate with a layer of zinc on the surface, galvanizing is an economical and effective anti-corrosion square bending method that is often used! Cold plate is the abbreviation for cold rolled steel plate. The base material of cold-rolled plate is hot-rolled steel plate, which is generally relatively thin and thick.

The surface is bright and flat. Kind of like stainless steel. Galvanized sheet is a kind of pipe with acid resistance, rust resistance, corrosion resistance, light material and long service life, and the appearance of galvanized sheet is also more clever and beautiful, so many galvanized sheet manufacturers also fancy its advantages, increase production, and the application of galvanized sheet is more and more extensive.

I asked if the galvanized sheet should be pickled and phosphated for filing cabinet spraying, and it would be better to be professional.

If you don't pickle phosphating, you can't go wrong.

Hello, if you leak the bright to reduce the cost of the perspective is not needed, because the phosphating back width is used to form a protective film on the surface of the iron, so that the workpiece will not rust before spraying, and the land lead galvanized sheet will not have this situation!

Pickling is not to remove the fried plate to be clean, it is easier to apply plastic powder.

Your hall is good, Pickling steel plate Pickling steel plate is to use hydrochloric acid to remove the iron oxide scale on the hot-rolled brigade steel plate to get a beautiful and smooth surface, so that the surface defects of the steel plate can be seen at a glance, and it is easy to weld, oil and paint.

Cold-applied zinc coatings.

And. Cold-sprayed zinc.

It is the same kind of paint, but the name is different, and cold-applied zinc paint can be with.

Hot-dip galvanizing. To achieve the same anti-corrosion effect, long-term anti-corrosion for 15 to 20 years.

Cold spray zinc coating matching:

Steel structure anti-corrosion.

Power plant facilities: DZ2000 cold spray zinc coating + DB900 cold.

Galvanized sealant.

Cold-applied zinc coatings have excellent anti-corrosion performance, especially in terms of zinc content and salt spray, and their performance is higher than that of most paints. Because of its excellent anti-corrosion performance, it is widely used in steel structures, power facilities, iron towers, power plants, substations, etc.

Cold-applied zinc paint and cold-sprayed zinc are called the same.

Water-based cold spray zinc paint is used for surface anti-corrosion of various steel components, such as towers, bridges, pipelines, storage tanks, containers, ships, car bodies, signs, fences, etc. Application of material replacement: It is used for long-term anti-corrosion of new steel, replacing hot-dip galvanizing, hot-spray zinc, and ordinary anti-corrosion systems, and can also be applied to galvanizing layer renewal and repair.

The application of multiple functions: it can be used as a single layer as a metal anti-corrosion protective layer, and can also be used as a primer for heavy anti-corrosion coating system, with a longer anti-corrosion life.

Both are the same kind of lacquer. Cold-applied zinc coatings are mainly formulated by three parts: high-purity zinc powder, volatile solvents and special organic mixed resins. The zinc content in the dry film of the coating is up to 96%, with excellent anti-corrosion performance, easy construction and environmentally friendly coating, which can replace the traditional hot-dip galvanizing, and is the preferred primer for anti-corrosion of outdoor steel structures, iron towers and power facilities!

Cold-applied zinc coatings are one-component coatings, which are easy to apply, do not need to add curing agents, and have no gelling time limit.

The zinc content is high, and the zinc powder content in the dry film reaches 96%, which exceeds the epoxy zinc-rich primer and inorganic zinc-rich primer, and has stronger protection;

Sacrificing the cathodic to protect the anode, with the cathodic protection feature to protect the steel from corrosion, the anti-corrosion is more effective and thorough;

Cold-applied zinc coating has excellent salt spray resistance, up to 3000 hours, and the coating film is intact;

The paint film is weldable, and the coating is not damaged by cutting or welding;

The coating has excellent low temperature resistance and can be used in minus 60 environments;

XDY cold galvanizing paint is also known as cold galvanizing, cold galvanizing paint, cold galvanizing anticorrosive coating, galvanizing coating, English name: cold galvanizing paint. Cold galvanized coating is a one-component high-zinc content zinc-rich coating, which is a galvanized anticorrosive coating formulated by imported high-quality neutral resin, high-purity zinc and volatile solvent.

Compared to other two-component zinc-rich coatings or other one-component products, XDY cold galvanized coatings contain extremely high zinc content (more than 96% zinc in the dry film).

1. Composition of cold galvanized coating formula.

It is mainly composed of imported high-quality neutral resin and high-purity zinc as a new type of long-lasting double-acting steel structure heavy anticorrosive coating.

2. Cold galvanized coating use.

It has excellent cathodic protection and shielding function for steel. It is easy to construct, can be sprayed, brushed and rolled, and is the best material to replace traditional hot-dip galvanizing, hot-dip galvanizing and hot-sprayed zinc (aluminum). It is suitable for heavy anti-corrosion fields such as ships, steel bridges, steel roof trusses, steel grids, power facilities, pipelines, storage tanks, etc.

3. Main characteristics of cold galvanized coating.

Long-term: the pure zinc content of the zinc film is 96, the salt spray resistance is 1000 hours, and the coating system has an anti-corrosion cycle of more than 25 years;

Environmental protection: does not contain toxic chemicals such as isocyanates and benzene;

Anti-slip: anti-slip coefficient, which can be used for anti-corrosion of high-strength bolted connection surfaces;

Weld-resistant: coated welding does not affect the welding quality, and the coating is not cut and welded damage;

High temperature resistance: continuous high temperature resistance is 300;

Low temperature resistance: can withstand temperatures of -60 continuously;

Quick drying: 25 hours surface drying time 15 minutes, dry 18 hours.

4. Storage method:

Storage: It must be stored in accordance with national regulations. The storage environment should be dry, cool, well ventilated, avoid high temperatures, and stay away from fire. The packaging container must be kept tightly sealed.

Shelf life: 6 months. After that, it should be used after passing the inspection.

5. Painting interval:

Substrate temperature: 5 23 40

Shortest: 18h 4h 2h

Maximum: Unlimited.

Note: Before overcoating, the surface of the post-coating film should be dry and free of zinc salts and other contaminants;

6. Precautions:

If paint gets into your eyes, rinse immediately with water and consult a doctor. If it is contaminated with paint, it should be rinsed with soap and water or use an appropriate industrial cleaning agent, preferably not with a large amount of solvent or thinner. If you inhale excessive solvent gas or paint mist, you should immediately move to a place with fresh air, loosen the collar and let it recover gradually; If the paint is accidentally swallowed, you should consult a doctor immediately.

Safety: The construction site should have good ventilation conditions to prevent the inhalation of solvent gases and paint mist during spraying.

Note: The product should be kept away from the heat source, and smoking should be strictly prohibited on the construction site. This instruction manual has been prepared based on the knowledge and experience gained in our laboratory and construction practice, but the coating application process is usually outside our control.

Single-component, fast-drying, 96% zincLike heavy anticorrosive coatings, the production and coating engineering of ZNMCT cold galvanizing also involves environmental protection and occupational health and safety of construction personnel and the public, so environmental protection is also the main development direction of cold galvanizing. Cold galvanized material has excellent environmental performance, which is mainly reflected in the following four aspects:

1) The composition does not contain heavy metals such as pH, Cr, and Hg;

2) It belongs to the thick film type material, with good thixotropic performance, and can be coated after full stirring, with little or no diluent. Due to the high solids content of cold galvanized up to 77%, a single airless spraying can obtain a higher film thickness, reduce the volatilization of organic solvents, and reduce the energy consumption of drying, which is conducive to environmental protection.

3) After testing, it has been proved that some cold galvanized solvents and diluents do not contain toxic organic solvents such as toluene, ketones, halogenated hydrocarbons, etc.

4) Mosel cold galvanizing coating is the best material to replace hot-dip galvanizing and arc (hot) spray zinc, which plays a more obvious role in reducing three wastes, reducing energy consumption and improving the social benefits of environmental protection.