The computer can t start when it starts cold, and it can t start when the computer starts cold?

Unplug the memory and try the gold finger with an eraser. Then install it. It's OK to boot up.

It should be a problem with the motherboard battery, and the BIOS settings you changed cannot be saved after shutting down.

Summary. Dear dear, it's a pleasure to answer your <>

There are these reasons why the cold king chiller does not start when it is turned on: if the cold and warm air conditioner does not start after defrosting, one is that the product has major design defects, and the other is that the refrigerant in the pipeline of the air conditioning system has a serious leakage. When the defrosting is over, the four-way reversing valve cannot be switched back to the heating state or the switching is successful, but due to the insufficient amount of refrigerant, the heating capacity becomes poor, and it is very likely that the heating effect will be poor for a long time.

It is recommended to report to the air conditioner manufacturer for after-sales repair, and let the maintenance personnel overhaul it on site.

What happens when the cold king cold machine doesn't start.

Dear dear, it's a pleasure to answer your <>

There are these reasons why the cold king chiller does not start when it is turned on: if the cold and warm air conditioner does not start after defrosting, one is that the product has major design defects, and the other is that the refrigerant in the pipeline of the air conditioning system has a serious leakage. When the defrosting is over, the four-way reversing valve cannot be switched back to the hail heating state or the switch is successful, but due to the insufficient amount of refrigerant, the heating capacity becomes poor, and it is very likely that there will be a long period of poor heating effect.

It is recommended to report to the air-conditioning manufacturer for after-sales repair, and let the maintenance personnel overhaul it on site.

Kiss and expand the <> of information

In 1956, the Cold King Company designed and manufactured the world's first mechanical transportation refrigeration unit, and in 1956, the Cold King Company designed and manufactured the bus air conditioning unit. Since 1938, Cold King's products and parts have set the standard for the world's transportation temperature control industry, and has been the world leader in refrigerated transportation systems, providing transportation temperature control solutions to the global transportation industry, the main markets are cold history closed transportation of temperature-sensitive products, temperature control for public transportation and public transportation, long-distance and short-distance ground refrigerated transportation, and transoceanic refrigerated transportation. Today, the American Thermoking company has a global production base to serve the world market.

At 13 plants in 8 countries around the world, we design and manufacture cooling and heating units for trucks, trailers, railway wagons and transoceanic containers, as well as air conditioning units for motor vehicles, rail trains and urban public transport vehicles. For a long time, the name of Thermoking has always stood for excellent quality. Whether the unit is from the United States, China, Ireland, or the Czech Republic, users will get the same high-quality products.

More than 5,000 employees and more than 500 first-class businessmen are distributed all over the world, inheriting the responsibility of thermoking to make our lives better!

It is very likely that there is a power supply problem, which occurred in two computers in my previous unit, and the result of the inspection is that the power supply is aging and the power supply is insufficient.

In general, this situation has to be judged as a problem with the motherboard and needs to be repaired.

In fact, if the computer can't be turned on, it is generally not caused by a virus, because a virus is software, and it is basically loaded after it is turned on, which will only make your system run abnormally. Generally speaking, the computer can't be turned on, all because of hardware problems, and there are many kinds of hardware problems, I just say a few common ones that don't need to replace the hardware! (There are also software problems, but they are generally caused by Qi Yan's accidental deletion of the system boot file, which is needed.)

Reinstall the system. Now, here are just the common hardware problems! ）

1. There is too much ash in the computer, and more ash will cause heat dissipation difficulties in the computer, and many hardware will not work properly, resulting in the inability to turn on!

2. The hardware is loose, sometimes because the computer has been used for too long, some parts will be loosened, and the computer will naturally not be able to turn on, especially the hard disk and the high power with the silver source! As long as the screws are put on well, there will be no problem.

3. The slots are aging, and the computer is long, and the slots will be aging, resulting in hardware between them.

Goldfinger. Poor contact.

Sometimes there is a problem with the socket of the motherboard, and sometimes it is the aging of other hard gold fingers!! Generally, if this kind of problem occurs, you just need to change the slot, or you can take the rubber handle gold finger.

Rub. It's mine.

A classmate. It's just that the memory slot is aging, and it's good to change the slot!! At the same time, this problem is also the most common. Many times, when using the computer, some people lose their hardware because of this reason!!

4 voltage problems in your area.

The voltage is unstable.

Or if the voltage is too low, this can also happen! 1 In this case, I can't help it, buy one.

Voltage regulators. Something, can relieve it!!

1) Immediately after booting, press F8 to do not move to the advanced option appears in the let go, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also dead, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed inappropriate things, and uninstall all the inappropriate things before the accident, or restore the system or reinstall it).

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

2) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install anything that doesn't fit (if you have any questions, please ask me).

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

3) In terms of hardware, such as whether there is a problem with the hard disk, memory, etc., whether the temperature of the CPU and other hardware is high, if it is caused by hardware problems, it is recommended to overhaul it.

There may be a problem with the system boot area, which cannot be properly guided into the normal system; If you have a PE system tool disk, you can enter the PE system and repair the boot partition; (The PE system tool wheel is the best software on the Internet, and then it can be made with a U disk.) Or some systems come with it) If you don't have it on hand, it is recommended to reinstall the system, which should also be able to solve the problem.

Try a different computer version!