My memory is now 768M... It s better to set how much virtual memory you have

Your memory should be 512 and 256, generally speaking, it is best to set it to a multiple of the physical memory. So you should set to:

A maximum and minimum value of 1920 is sufficient.

Do you use BT and is the internet speed slow? Playing big games? The above problem is yes, just set 128M virtual memory in the non-system partition, otherwise you don't need it!

And if the overall performance of the machine is good, 768M doesn't need to be virtual, because the 256M plus the best virtual 256M* is only 640M.

Generally used. Set 256 is enough.

You can set it wherever the drive has the most space.

The garbage on the third floor!!

256-512 will suffice.

I am now 512 RAM and 256 virtual memory

If the RAM is more than 1G

Don't use virtual memory.

It is best not to set to a system partition.

The system defaults to 768, and you just need to set it to twice your physical memory.

If you don't play big games, you can not use it. If you encounter using large software that says virtual memory is insufficient. Set it to half of the memory first, try again, and then add 128m...Generally, the maximum and minimum values are set to the same value.

The initial size is a double of your physical memory, and the maximum is 3 times your size.

It is recommended to let the system manage itself.

There is no need to set up any virtual memory!!

512m to ask for it.

You don't need to set it up, this is when your memory performance is the best!

Your memory is large enough that you don't need to set up virtual memory.

Anyway, the hard disks are relatively large now, isn't it too wasteful to keep them?

My setup is 800-1200

You don't have to do this.

I'm a rookie who wants to learn this!

The minimum value is set to a multiple of the physical memory, and the maximum value is set to 3 times the physical memory, and the partition is dedicated to storing page files and no other files. The reason why a separate partition is used to set virtual memory is mainly based on two considerations: first, because there are no other files on the partition, the partition will not produce disk fragmentation, which can ensure that the data reading and writing of page files are not interfered with by disk fragmentation; Second, according to Windows' memory management technology, Windows will give priority to partitions that are not frequently accessed.

Page files, which also reduces the chance of reading page files in the system disk and reduces the pressure on the system disk.

3) Other hard disk partitions do not set any page files. Of course, if you have multiple drives, you can create a page file for each drive. When information is distributed across multiple page files, the drive controller can perform read and write operations on multiple disks at the same time.

In this way, the performance of the system will be improved.

Tip: The minimum value of virtual memory allowed to be set is 2MB, and the maximum value cannot exceed the remaining space value of the current hard disk, and it cannot exceed the memory addressing range of the 32-bit operating system - 4GB

Your memory is 1G, because the graphics card occupies 16M, so the display is 984M virtual memory is normally times the basic memory, the specific settings are as follows:

1. Open the "My Computer" attribute;

2. Click "Advanced" to open "Settings";

3. Click the mouse on C, and then click on the following points: No paging file, Settings:

4. Return to Settings:

4. Points: d, custom size, input imaginary memory number, set, OK;

5. The virtual memory is generally set to its own memory: times, 6. The virtual memory is best set in the D drive, because the general running files are installed in this drive letter.

The initial size of your computer's virtual memory: 1000, the maximum value: 3000 is fine;

My virtual memory setting is set for 1g, I hope you are satisfied.

Set up virtual memory:

There is a very large data exchange file in the hard disk, which is reserved by the system for virtual memory as a temporary storage place, which is often used by many applications, so the system needs to make a large amount of data access to the main memory frequently, so the speed of accessing this file constitutes a very important factor affecting the speed of the computer! Generally, Windows defaults to the system to manage the virtual memory, and it will automatically adjust the size of the swap file according to the needs of different programs, but such a large and small size will put an additional burden on the system and make the system run slower! For this reason, it is best to customize the minimum and maximum values of virtual memory to avoid frequent resizes.

Steps to set up virtual memory:

Right-click in the [My Computer] [Properties] [Advanced] [Performance] dialog box to set the "Virtual Memory".

The minimum setting is equal to your current physical memory, which is the same as your real memory, generally it is set to double or 2 times the physical memory, and the setting of virtual memory is not too high, and the highest setting is 1024MB, which is twice the best setting.

For example, if the memory is 1G, it can be set to 1536M (times); For 2G, it can be set to 2048M

Pull out the strip of 256, and wipe the gold finger of 512 with a leather rub.

Brothers. The combination of two memory sticks of different models will affect the stability of the system, and the computer will not open in serious cases.

Don't think about how to tune the virtual memory, that doesn't make much difference.

Virtual Memory My Computer Right-click --- Properties --- Advanced --- the first one is the virtual memory settings--- settings --- advanced --- changes.

You just acquiesce.

It is highly recommended to throw away the 256 RAM and take the 512 RAM down and erase the contact points with an eraser.

Playing games requires a high level of computer hardware configuration, and it must be used correctly, otherwise it will not work, and it will be stuck if it can run, especially if you play large games, it will also cause a blue screen of death. Try it as described below and see if it alleviates.

1. Check the CPU and graphics card for heat dissipation, dust removal, oiling, or replace the fan.

Second, the power supply voltage is unstable, the power supply is insufficient, and the power supply with high quality and high power is replaced.

3. Clean up and defragment the disk.

1. In the window of my computer, right-click the drive letter you want to clean up - "Properties" - "Clean Disk" - check the files you want to delete - OK - Yes.

2. Clear the temporary file, start-run-enter %temp%-OK.

3. Clean up the registry and junk files with Optimizer or Super Bunny.

4. Close some startup programs, start-run-msconfig---start, in addition to anti-virus software, input methods can be turned off in general.

5. Delete unused program software.

7. Reduce the burden of memory, do not open too many programs. If you have too many documents open or too many programs running at the same time, you will not have enough memory to run other programs, so you should close the programs and windows you don't use at any time.

4. Upgrade the motherboard, graphics card, and network card drivers.

5. Increase physical memory, replace it with high-quality memory, and set up virtual memory reasonably.

1. To play games, the virtual memory can be set to be larger, the minimum value is multiple of the physical memory, and the maximum value is 2-3 times of the physical memory. No matter how big it is, it takes up too much space on your hard drive.

2. The method of setting virtual memory is: right-click on my computer - Properties - Advanced - Performance Settings - Advanced - Virtual memory change - Select the partition where the virtual memory (page file) is stored in the drive list - Custom size - Set the value in the "Initial Size" and "Maximum", then click the "Settings" button, and finally click the "OK" button to exit.

3. The partition where the virtual memory (page file) is stored must have enough space, and the hard disk resources are insufficient, resulting in insufficient virtual memory.

6. Optimize your computer with Optimizer or Super Bunny.

You're talking about setting up memory or setting up cache.

Memory is hardware and cannot be set.

It's time to add memory.

The minimum value of virtual memory is 1 to 1 times that of physical memory; The maximum value of virtual memory is 2 to times that of physical memory.

How to set up virtual memory:

1. Right-click the "Computer" icon (xp is my computer) and select Properties.

2. Click the "Advanced System Settings" tab in the system properties window, and then click the "Settings" button in the pop-up dialog box.

3. Click "Advanced" Lao Hengran in the pop-up performance options window, and click the "Change" button in the virtual memory below.

4. The pop-up dialog box is to set the virtual memory, the virtual memory is best in the non-system disk, select the drive letter, and click "Custom size". Enter the "Initial Size" and "Maximum Threshold" and click the "Settings" button. The minimum value of virtual memory is 1 to 1 times that of physical memory; The maximum value of virtual memory is 2 to times that of physical memory.

5. If you say "To make the changes take effect, you need to restart the computer", click OK.

6. Click "OK" in all windows until it pops up "You must restart your computer for the new settings to take effect." Click "Yes" and the system will restart automatically.

After the reboot is complete, the virtual memory settings take effect.