-
Set up a temporary LAN with wireless.
XP is more troublesome, I don't know what system yours is.
Both Vista and Win7 are easy :
1.The host chooses to set up a temporary wireless network in the network management.
2.Follow the guide and set up an open plan.
3.After walking through the wizard, if you do it correctly, you have successfully set up a wireless LAN.
5.See your network name and connect.
6.Wait for a while, and the status is Connected.
PS: It has nothing to do with sharing networks and files. When you're both on the same network, you'll be on a local area network and you'll be able to play Warcraft and all other LAN games smoothly.
My classmates and I experimented that a wireless LAN established by a computer can be connected to up to 5 computers, so if you use wireless to connect to Warcraft, you can play with up to 6 people, if there are more people, it is possible to connect, but the network will be very unstable, and it is very easy to drop.
If it's just 2 of you, one network cable will do the trick. There's no need to be so troublesome.
-
With a wireless router, you have to be a local area network to do point-to-point useless.
-
In the "Network Link" property, click on the properties of the wireless link, and in the General tab, click on "Install", install "DDK Package" and "NWLINK IPX SPX...."
-
If you want to connect the machines together in the LAN, you can connect directly with the same network segment.
-
1 First of all. If both machines can open the Warcraft map to play the game separately, then it has nothing to do with the computer.
2.Does the landlord confirm that your anti-virus software and system firewall are turned off? (Right-click on your online neighbor, click on Properties, select Local Connection, right-click on Properties, select Advanced after the properties interface appears, and click on Firewall.)"Settings".Select "Close" and click OK).
3.Then make sure that the two computers are connected by a router or directly connected to the two consoles via a single network cable?..
4.If you are connecting two computers through a network cable, right-click "Local Connection" and click Properties to enter the Internet protocol, and change all the IP addresses and DNS addresses in the regular to automatically obtain. In general, this situation should be fine. The landlord tries).
5.If it is a route, first set the route to the host through the route settings. Then the IP address and DNS address can be automatically obtained, if not, the IP address (x value range = 2 250, the IP of the two machines can not conflict) DNS address can be "automatically obtained" by default. . .
The landlord tried it and saw if it could.
-
If some people can, others can't, it's because there is a problem with the IP automatically assigned by the switch, just change it manually, so that the IP address of all machines is the same.
IP is configured into the same network segment as follows:
-
Since interstellar,CS can be and LAN settings are not managed.,To tell you a simple way is that you copy your roommate Warcraft client to your computer.,And then try!!
-
Try my method, local connection properties - install - select protocol - add - select ipx spx netbios seems to be this.
It should be fine after adding. Give points after solving!
-
In my practical experience, you have to turn off the firewall of both people!!
-
To add the longest network protocol to my connection.
-
Maintain consistency in the Warcraft version.
-
Is your Warcraft version the same Try the next version converter.
Yours is connected to the switch with 4 ADSL routers, and then connected to the PC bar below, so that it is in a local area network, and then it is not in a network segment of the local area network. >>>More
The first level of LAN mutual access:
Local Security Policy - Security Options - Accounts: Local accounts with blank passwords are only allowed to log in to the console. The system default is: Enabled. >>>More
It depends on whether your router is normal or an integrated one; >>>More
Computer supporting: computer desk, computer chair.
Wiring needs: network cable (according to the size and distance of your computer room to determine the length, generally a computer room two boxes of wires are needed, 400 hundred meters), switch cabinet (50 machines of 1 meter can be, smaller is OK, as long as you can put down the switch, if you consider expansion and heat dissipation, use a larger one), 130 crystal heads, clamping pliers, these two are used for network cables, and you don't need to consider adding someone to do the wire. Switches, the number of switches depends on the number of interfaces you choose, if it is 24 ports, you need 3, 48 ports plus a 12 ports or 24 ports, in short, you need to meet the needs of 50 machines, and you should also consider scalability, such as temporary access to the machine, switch connection, spare port, etc. >>>More
Intranet IP to see if it can be pinged!
2.Set your computer IP to the same network segment as your company's network! And the gateway is set up with the Internet access IP3 of the LANSee if the firewall has any software that restricts Internet access, such as Internet Explorer and the like! >>>More