9800GT 128Mb graphics card when playing CF why the FPS is only 40

Is your system XP? It's not XP that replaces the system first.

The fps of the replaced system is still 40+, and the graphics card driver is not installed correctly. If both are resolved, your machine's FPS should be around 100 FPS, but you also have to pay attention to what the ping value in the CF is. There are also reasons why the internet speed is not good

9800gt 128m

This graphics card is obviously swiped, probably a previous 7300 or something!

The 9800GT has never released a card with only 128M VRAM, not even an OEM! This card is between 200-300 **, if js when 9800gt real ** sell you you will lose a lot!

The 9800GT will not only have 128MB of video memory, it is likely that the 6600 and other graphics cards will be swiped after the BIOS, and the things will be checked with GPUZ.

At first glance, it's all a fake card... It is estimated that 7300SE GS and other changes, and there is nothing to say about poor performance.

Turn off the pendant sync or change the graphics card driver I'm also a 9800gt graphics card 128 video memory, play very comfortably cs cf are fps 99 run steadily you try a few more graphics card drivers It doesn't affect fps and affects the trajectory.

- -This U is enough to run CF,My CPU and yours are a series,It's just 4400+,The share of playing CF is generally about 45%,Of course, your U is not a problem.,The main problem is the integrated graphics card.,Same as you.,My family also integrated graphics card before.,I remember it's GT6100 nforce400.。。 The video memory is 256MB, but in fact, the default video memory of the BIOS integrated graphics card is generally (32M, 64M, and 128M if it is a little higher), but due to the limited memory bandwidth, the actual available memory video memory is much lower than the value of the set video memory.

So your 384M set display actually has not much available video memory, at most 64M, and the effect of playing games is not good, especially 3D games. Because the display and memory are shared,Generally, 3D games occupy a lot of memory.,If you take away part of its video memory... You can imagine how much pressure on memory can be ...

The advice to you is to set the picture to low when playing cf, which will improve a lot of FPS, and usually pay attention to optimizing the computer, such as: optimization master, Lu master, and so on.

Or you can choose to install a discrete graphics card, as long as your motherboard has a PCI-E slot, buy a graphics card to recommend you a store on the **, the popularity is very high, the reputation is also great, it is recommended that you install GT8600 is enough, generally play CF8V8 when the FPS is 100+**:

More than 90 pictures are already relatively smooth.

Let's update the driver, there's nothing good to do for now.

This graphics card is positioned in the mid-to-high-end, enough for your CF frame rate to 150, and there are many other reasons, such as your system stress, if you use Win7 to 100 or more, it will be difficult, if you run under XP, it will be much easier.

Then there is the pressure on your system, service items, etc., which will affect the smoothness of the game.

FPS is related to the graphics card and the CPU, check the heat dissipation of the CPU and the graphics card. Then check the processes of the system to see if other processes are taking up too much system resources. Why don't you just reinstall the system?

I also use GT2401G video memory, and I often jump to single digits when playing CF60-70, and this graphics card is unstable when playing this game. I've tried the other methods below, but they don't work.

The system lacks a stupid and stupid program to accompany the external loading of the program, which will lead to the change card.

The 8600GT should be a stable CF, the key depends on your CPU.

Ordinary effect is more than 100.

The highest effect is more than 60-80.

Despise the upstairs!!

Looking at the data, it's pretty normal.

Your configuration is okay Maybe it's your game problem Reinstall the game It's all about the system optimization is not good enough Get an optimization master If it doesn't work, you can only reinstall the system You said you can't mention it, isn't it a bit stuck If that's the case, make sure your network speed is strong.

How much FPS do you have before and after the change? However, I would say that the GT430 is really a low-end card, and 1G video memory is not the key.

Whether the graphics card is good or not depends on the video memory.

430 is originally a slag card, and 1G video memory is also a slag card.

CF's FPS value is very different from CS.,Many people say that this has a lot to do with your system's CPU and memory usage.,It doesn't have much to do with the game's display settings.,Of course。。。 Your graphics card has to be about the same. I'm an Internet café user.,In fact, the more stable this FPS value, the better.,As far as the current CF is concerned.,Everyone knows the jump sniper?

Why have some people been sniped before they landed?,I don't think it's a problem with network speed.,My ping has been 10+There won't be a problem on the network.,There's no big problem with the graphics card.,Playing a large RPG with full effect won't get stuck.。

1.Graphics card settings.

Most players already know this method, which is to turn off the vertical sync, and the 3D settings, all of which are tuned to high performance.

2.Close the program.

This method is the method I have been using again, because I like to turn on QQ as soon as I turn it on, once I didn't open it and suddenly found that the fps were hundreds!

Personally, it is recommended to close the programs that are not in use to save CPU usage and memory usage. The effect is not very obvious, but it is okay.

Significantly improved the problem of character teleportation, I've been using the Ice Blade to slash the process, you can also turn it off manually.

The above is my personal method First adjust from the system settings, right-click 'My Computer' -- Advanced -- Performance Settings -- click 'Adjust to Best Performance' -- OK. The second step is to set up the graphics card, open the graphics card settings options - 3D settings - adjust the image settings via preview - I use my preferences, and it is more important than 'performance'. Here's how to adjust the system to achieve the fps value of the CF Hopefully, these are the methods that I have selected and summarized!

Server problems, it's best to play on a server in your city area, so that the pin will be good

1. See if the power of the power supply is enough. If the power is just right, the power supply generates a lot of heat when it works. It is recommended to replace the power supply with a higher power.

2. Install a 2G memory module to form a dual-channel to upgrade memory performance. Please deal with this article as appropriate, the game console memory 2G is too small.

3. Check whether the hardware temperature is normal, please do a good job of heat dissipation in the host to ensure that the hardware is completely normal.

4. Troubleshoot system and software problems: including cleaning the startup program, checking and killing viruses, and checking the integrity of the driver.

5. Check the settings of the graphics card control center, please reset to the default value.

6. Check the problem of the CF itself. Please go to the official website of the game to check whether there are any updated problems and related solutions in the corresponding version.

7. Shut down and restart the computer, test whether there is any change in the game, if there is a change, it means that the machine may have a large load (insufficient system resources). Combined with the performance of the 250 itself, please close other programs that are not important while gaming. The checkmethod opens Task Manager to see the number of service startups and currently running programs in memory.

Then delete the graphics card in Device Manager and reinstall the driver