The digital camera is the Sanyo E890, and now it automatically shuts down when it pushes the digital

It should be that there is a problem with the camera, it is estimated that there is an error in the system, brush the system to try, as long as it is not a physical failure, it will not affect the service life.

Other than that. Digital zoom is achieved by losing ** clarity, which is to magnify the pixel dots and try not to use them

In principle, the amount of computation of the camera processor will increase, which means that the power consumption of the processor will increase, that is, the power consumption of the digital zoom will be relatively high.

So, first of all, see if it is a problem with the battery, sometimes the battery is used for a long time, the contact will oxidize, affecting the battery power supply, if the contact oxidation is more serious, you can use the drawing with a steel grit eraser to wipe, in addition, the rechargeable battery has a service life, generally calculated by charging and discharging cycles, and the battery that is close to or reaches the service life will also produce insufficient power supply or unstable power supply.

Secondly, if it is a problem with the camera processor, I personally recommend not repairing it and replacing it with a new one. If memory serves, the Sanyo VPC-E890 is a popular product with 8 million pixels, 3 times light change, and engineering plastic shell, which was launched around 09 (I personally suspect that this model is produced by domestic ODM). According to this performance parameter, if there are new products on sale, it will not exceed 400 yuan, which may be much cheaper than the maintenance cost.

It sounds like it's running out of memory or a stuck cup. It is recommended to try again after the battery is sufficient, maybe it's just fake death, wait for a while after the black screen and see if you can recover on your own.

Restore to factory settings, if that doesn't work, flash the firmware.

According to the current national requirements, whether it is imported 3C products or domestic products, the production date needs to be labeled on the outer packaging. If you are an old machine, then go to his ** and use the serial number of the fuselage to check it!

You look at the manual, there is a time setting in the menu··· You can set it up... There is no way to say how to operate this slag step by step, and you can find it yourself in the chain like a vegetable Liang Min list...

There is no way to do digital cameras, so you can only buy Japanese goods, and the gap is too big.

Look for several big brands, Sony, Panasonic, Nikon. Among them, Nikon belongs to the most professional.

Check the battery first to make sure that the battery is fine. It's the digital camera motherboard that's wrong. Providence Digital Camera Repair Center provides free consultation and free testing, you can contact Providence Digital Camera Repair Center.

One look: Providence Digital Camera Repair Center can help you solve the problem.

You can ask the Providence Digital Camera Repair Center, they can answer your questions for free, the problems with our digital cameras here are sent to the Providence Digital Camera Repair Center to be repaired, Providence Digital Camera Repair Center service***,**Very fair.

Are you sure it's not the battery reason? Is it AA's rechargeable battery or a cube's lithium battery?

You try it out on another camera with your battery.

I think it's the battery.

The difference between the digital camera and the digital video camera is that the camera is mainly photographic, and its shooting time is determined by the data processing ability of the control chip designed in the camera and the maximum battery life of the battery in the camera, because the consumption of the battery by the camera function is very large, and the computer control chip in the camera will be damaged due to a large number of computing and processing chips, and the design of the digital camera is to ensure the integrity of the photographic function, such as taking up a lot of storage space, When you want to take pictures, the memory card may be full or the battery is exhausted and cannot be used, then the function of the camera will be lost, so some camera manufacturers will limit the camera function and time considering the cost of the chip. However, some cameras are designed to take into account the needs of consumers and do not set the camera time, which is equivalent to taking into account the technical requirements that should be used for the camera to take into account the camera function, and the result is that the technical requirements of photography are diluted and simplified. That's why more advanced cameras don't have camera capabilities at all.

I hope to relieve the landlord's doubts!

Just change to a larger memory card.

You just need to look at the settings a few more times, and if you use these things a lot, you will be an expert.