Patek Philippe 5971P how to adjust the date

Patek Philippe 5971P is a top watch with more than 2 million yuan, and it is also the most representative super complication model of PP family.

In particular, the 5971 is a perpetual calendar watch with a chronograph function, but it is also a hand-wound watch with a power reserve of about 60 hours.

Sometimes, if you forget to wind it on time, your watch stops, which can cause the perpetual calendar to be disrupted.

It is not difficult to adjust the date, just pull out the crown to the first gear to adjust the time, (the second gear is the adjustment time).

However, as a perpetual calendar watch, many times it is not enough for you to simply adjust the date. At the same time, it is necessary to adjust the phases of the month, the week, and the moon.

At this time, you need to adjust the 4 small hidden pushers around the circumference of the case, 2 at 12 o'clock at the upper part, 1 at 10 o'clock on the left side, and 1 next to the small diamond at 7 o'clock at the lower part. Adjust the month, week, 24-hour ampm, and full moon phases separately. In particular, the small pusher at 10 o'clock, indicating the AMPM function, had to be adjusted in order to ensure that the month-day-calendar jumped in sync without damaging the internal structure of the movement when the date was changed.

In addition, the 5971 is based on the Nouvelle Lemania 2310 CH27-70Q movement, I have the impression that it cannot be adjusted in reverse, so you should be more careful when adjusting, once it is overturned, it is best to leave it for a few days and wait for it to be adjusted again.

Finally, for such an expensive watch, be sure to read the instructions for use carefully before operation, or go directly to the counter for consultation.

and suspicious Yaotai mirror, flying in the blue clouds.

Hello, glad to answer for you!

The correct way to adjust the date on your watch.

1. The handle in the middle is screwed like a screw, according to the waterproof design of the counter, and when adjusting the time, it is screwed downwards counterclockwise, and it is loosened like a teacup lid.

2. After unscrewing, it is screwed directly upwards at 0 gear, and it is manually wound. (If you buy a new watch or have not worn it for a long time, please manually wind it for 30 turns when you wear it again, so as to ensure the energy of the watch, which is usually not needed).

3. Pull it lightly, it is 1 gear to twist up to adjust the week, and down to adjust the calendar.

4. When pulling it, it is 2 gears that can adjust the time. (It is not recommended to debug the watch privately, it is recommended to go to the after-sales center for debugging and calibration!) ）

First of all, it depends on what watch you have, whether it is a perpetual calendar or an annual calendar or ordinary, and the difficulty of adjusting the hair is decreasing, and the most common is to pull the crown out to the second position and rotate it directly, but it is not good for the movement.

The way to get professional is to adjust it to 6:30 a.m. and then adjust the date. But what this says is for the regular model. For the almanac or even the perpetual calendar is not the same, do not confuse, otherwise you will bear the consequences.

It is recommended to send it to the after-sales service center for testing and repair.

In 2008, Patek Philippe opened its second boutique and customer service center in China, a nationally protected building at 23 Qianmen in Beijing, which are the only of its kind in China, not only to provide sales and after-sales services, but also to provide Chinese consumers with the most professional lifelong service from Patek Philippe, so as to ensure that each Patek Philippe timepiece will inherit its original quality and precious value for a long time.

In 2012, with the joint efforts of Patek Philippe and Melchers, Patek Philippe opened its new residence at 33 Bund Yuan, Shanghai, as the "Maison Patek Philippe". The Patek Philippe Residence is not only a collection of Patek Philippe's watchmaking masterpieces, but also a place for watch lovers to share the craftsmanship of Patek Philippe's timepieces and to experience the long history and brand values of this temple of time.

Facing the rapid development of high-end consumption in the Chinese market, Patek Philippe adopts a stable and service-oriented marketing strategy. Thierry Stern, the current president of Patek Philippe, hopes that Patek Philippe will stick to its own inherent pace and philosophy in all aspects, low-key and steady; In China, we can have a more solid and long-term planning and development, not rushing for a moment, but combining the ten values of the brand with Chinese culture to lead Patek Philippe to a broader world.

Factors affecting the power loss of calendar and double calendar watches. The power loss of the calendar and double calendar mechanism in the working process not only depends on the form and layout of the mechanism, but also depends on the processing quality, material properties and elastic strength of the key parts of the main parts. For example, the watch brand also has some influence, such as the power loss of the Rolex mechanical calendar is smaller, while the power loss of Seiko is larger.

In addition, the power loss of the mechanism is not uniform in the whole working process, and the change curve of power loss is not the same for different forms of calendar and double calendar mechanisms.

Patek Philippe 5740 1g How to adjust the date.

Hello <>

Adjusting the date of Patek Philippe 5740 1g can be done by following these steps:1Pull out the crown to the second gear (i.e. adjust the position of the date); 2.

Turn the crown clockwise until the date jumps to the correct date; 3.Push the crown back into place. It should be noted that if the current time is afternoon, you should make sure that it is past 12 noon when you adjust the date, otherwise it may cause the date adjustment error.

1.If the watch has been stalled for a long time or for more than a month, it is recommended to pull the crown to the first gear and wind it manually before adjusting the date. 2.

When adjusting the date, do not pull the crown out of the third gear (i.e. the position where the time is adjusted), as this will pause the seconds hand and may affect the accuracy of the watch. <>

Summary. Hello dear dear, the Patek Philippe 5740 1G is an excellent mechanical watch with an automatic movement with functions such as date, day, month and 24-hour display. To adjust the date, you need to first pull out the crown to the second position, and then you can adjust the date by turning the crown.

Please note that if you want to adjust the date, please make sure that your watch hand is before the 12 o'clock position, otherwise the movement may be damaged. <>

Patek Philippe 5740 1g How to adjust the date.

Hello dear dear, the Patek Philippe 5740 1G is an excellent mechanical watch with an automatic movement with functions such as date, day, month and 24-hour display. To adjust the date, you need to first pull out the crown to the second position, and then you can adjust the date by turning the crown. Please note that if you want to adjust the date, please make sure that your watch hands are at 12 o'clock before the collapse of the core, otherwise it may damage the differential penetration core.

Brother <>

There are a few more important things you need to know before you adjust your date. First of all, you should avoid adjusting the date between 10 pm and 2 am, as the movement is undergoing a calendar change at this time, which can cause damage to the movement. Second, you should avoid adjusting the date backwards, as this may result in an incorrect date.

Finally, if you are unsure how to adjust the date, it is recommended that you consult a professional watch repairer or a Patek Philippe Hood Bush Right Repair Center. They can provide you with detailed instructions and make sure that your watch is properly maintained. <>

When adjusting the time and date of a Patek Philippe watch, first push the watch handle of the watch to the first gear, that is, the middle gear, which is the position where the date is set, at this time all the hands will stop moving, and the date needs to be adjusted to the day before the present, for example, today is Tuesday on the 20th, you need to adjust the watch to Monday on the 19th. Then push the watch handle next to it to the outermost layer, that is, the second gear, at this time will tell Sui Cheng to enter the time setting mode, and then gently rotate the watch handle above, mainly in a clockwise direction, first let the family carry the second hand to point to the position of 12, and then adjust the hour and minute hands according to the current time, and push the balance watch handle to the original place after adjustment.

Hello, it is a pleasure to serve you and give you the following answers: The date adjustment method of Patek Philippe 5207 watch is as follows: 1. Rotate the crown of the watch to the date adjustment position, that is, the "D" mark on the crown; 2. Press and hold the crown and rotate it to the right until the date is displayed correctly. 3. Turn the crown to the normal position, that is, the "W" mark on the crown; 4. Press and hold the crown and rotate to the left until the date is displayed correctly. 5. Turn the crown to the normal position, that is, the "H" mark on the crown; 6. Press and hold the crown and rotate to the right until the date is displayed correctly. 7. Rotate the crown to the normal position, that is, the "N" mark on the crown; 8. Press and hold the crown and rotate it to the left until the date is displayed correctly. 9. Turn the crown to the normal position, that is, the "S" mark on the crown; 10. Press and hold the crown and rotate to the right until the date is displayed correctly; 11. Turn the crown to the normal position, that is, the "C" mark on the crown; 12. Press and hold the crown and rotate to the left until the date is displayed correctly. 13. Rotate the crown to the normal position, that is, the "T" mark on the crown; 14. Press and hold the crown and rotate it to the right until the date is displayed correctly. 15. Rotate the crown to the normal position, that is, the "A" mark on the crown; 16. Press and hold the crown and rotate to the left until the date is displayed correctly. 17. Rotate the crown to the normal position, that is, the "O" mark on the crown; 18. Press and hold the crown and rotate to the right until the date is displayed correctly. 19. Rotate the crown to the normal position, that is, the "R" mark on the crown; 20. Press and hold the crown and rotate to the left until the date is displayed correctly. 21. Turn the crown to the normal position, that is, the "P" mark on the crown; 22. Press and hold the crown and rotate it to the right until the date is displayed correctly. 23. Rotate the crown to the normal position, that is, the "L" mark on the crown; 24. Press the liquid source to hold the crown and rotate to the left until the date is displayed correctly; 25. Rotate the crown to.