Does the Xiaomi Mi 3 support a single file over 4GB in size?

As for what its partition format is,I don't know,The reason is that the Mi3 system is Android,This version of the internal memory of the mobile phone no longer appears in the form of a USB disk,Whether it is in XP or Win7,It is in the form of a mobile device,Manage through MTP,Although it is the same as a USB disk,But it is essentially different,So I haven't figured out the internal storage form now。

Hi! Yes.

Xiaomi Mi Phone 3 details can be viewed:

As long as you have enough memory, no matter how big it is.

It depends on how much storage you have left, more than 4G is fine.

As for what its partition format is,I don't know,The reason is that the Mi3 system is Android,This version of the internal memory of the mobile phone no longer appears in the form of a USB disk,Whether it is in XP or Win7,It is in the form of a mobile device,Manage through MTP,Although it is the same as a USB disk,But it is essentially different,So I haven't figured out the internal storage form now。

No, it seems that the mobile phone of Xiaomi Mi 2S comes with only 4G memory

Dear, it's supportive, I won't say much about the big truth, the contemptible people just covet your reward.

Hi! Liquid. The ROM capacity of Xiaomi Mi 2S is 32G,You can put files below 32G,ROM is the meaning of the C disk of the computer。

As long as the built-in storage space is sufficient, a single 4G file can be stored, the format of the built-in storage of Android phones is ext4, which can store a single file of more than 4G, if it is a memory card, it is generally in FAT32 format, and a single file of more than 4G cannot be stored.

It depends on what format your phone is, the computer hard disk is NTFS format, which can store large files, and the U disk is FAT32 format, the U disk of this format cannot store files larger than 4G, and it can be changed to ExFAT format, which can store files larger than 4G, but this format is only for Win7 or above systems, and it is not very compatible under XP.

Mobile phones can, memory cards generally cannot.

No, you can save it, just add a memory card.

Han: Liu Chan and Liu Feng (Liu Bei's righteous son) are the sons of Liu Bei; Guan Ping (Guan Yu's righteous son, his own son in the official history), Guan Xing is the son of Guan Yu; Zhang Bao is the son of Zhang Fei; Zhuge Zhan is the son of Zhuge Liang; Zhuge Shang is the grandson of Zhuge Liang. Wu:

Sun Ce and Sun Quan are the sons of Sun Jian; Sun Ren (Sun Shangxiang) was the daughter of Sun Jian, the sister of Sun Ce and Sun Quan, and later married Liu Bei (who eventually returned to Wu); Lu Kang is the son of Lu Xun and Zhuge Jin (the brother of Zhuge Liang). [1]

If the file size is too large to be uploaded, you can compress it and then upload it.

Hello! The rules are: the size cannot exceed 1GB

Use the NTFS or ExFAT file system for volume compression.

If you have to store it on a FAT32 partition, you can use WinRAR to split the large file into several small files of less than 4G to save it.

When you need to use it, use WinRAR to extract all the compressed files to NTFS or ExFAT partitions.

The steps to convert FAT32 to NTFS are as follows:

1. Click Start on your desktop, select All Programs, click Attachments, and then click Command Prompt.

2. Open the command prompt, if you want to convert C drive to ntfs, enter "convert c: fs:ntfs".

If you want to convert drive D to NTFS, enter "convert d: fs:ntfs".

And so on. 3. After the second step, click Enter, which is the Enter key.

4. Check the disk you just converted to see if the conversion is complete. See if the data is successfully converted.

Files can be compressed in volumes using compression software. It can be divided into files smaller than 4G, and it can be put in.

The disk becomes NTFS without formatting, which can be achieved with the dos command.

1. Compression in volumes:

1. Right-click on the file to be compressed in volume and select Add to compressed file.

2. In the WinRAR interface that opens, in the lower left corner, it is divided into volumes. Choose.

Once confirmed, volume compression begins.

2. Steps of FAT32 to NTFS:

1. Click to start the program attachment Command Prompt.

2. Open the command prompt, if you want to convert C drive to ntfs, enter "convert c: fs:ntfs".

If you want to convert drive D to NTFS, enter "convert d: fs:ntfs".

Analogy. 3. After executing the previous step, click Enter, which is the Enter key.

4. Check whether the newly rotated disk has completed the conversion. The image below shows that the data is still there, and the conversion is successful.

Under Win XP system, how to convert FT32 format from USB flash drive to NTFS format.

It is not necessary to format the USB flash drive into NTFS format (because the flash storage cluster is 16K 32K), but you may encounter the problem of transferring large files (greater than 4G), in fact, formatting or converting to NTFS is very simple, only a few simple steps:

1.Select the Start Run command, enter the Cmd command in the pop-up dialog box (or click the Start Program Attachment Command Prompt) to open the Command Prompt window.

2.Once the window opens, enter it at the prompt of the cursor.

convert disk:/fs:ntfs

disk: is the drive letter fs: ntfs is the format).

Then press enter. Notice that there is a space after "convert".

For example: convert f: fs: ntfs converts f drive to ntfs format.

3.Then, if the drive has a volume label, you will be asked to enter the volume label of the disk (that is, the name, not the drive letter), and then press Enter; Added: To view the volume label: right-click on the disk Properties General.

If the drive does not have a volume label, the conversion is carried out directly.

4.When the conversion is complete, it will report to you about the disk partitions you converted.

Notes:1Remember: it's convert, not covert

If convert can't lock the drive (for example, if the drive is a system volume or a current drive), it automatically starts converting the drive before it enters the desktop the next time you restart your computer. If you can't restart your computer immediately to complete the conversion, then schedule a time to restart your computer and allow the required time for the conversion process.

If there are files on the partition you want to convert that are being used by the system, then when converting, the converter will ask you if you want to unmount the volume (i.e. partition) you want to convert, in this case it is best to select "No", and finally it will ask you if you want to convert the partition the next time the computer starts, select "Yes" and restart the machine to complete the conversion.

Use the convert command to convert the file format from FAT to NTFS, leaving the existing files and folders intact.

When you want to copy a large file of more than 4G to a USB flash drive, it suddenly prompts that the file is too large to be saved. Then let's open the USB flash drive and convert the format to save large files.

Press the button at the bottom of the screen twice in a row, and a bunch of icons will appear, and then press and hold any of those icons, and a red minus sign will come out, and you can click on the minus sign if you want to turn it off.

You can use winrar or good pressure and other compressed files, do split volume rar files, you can make multiple files, hundreds of m in size, specific tutorials are available on the Internet.

Friends, the largest solid storage on the market may not have a 500g USB flash drive, it may have been deceived, fake, you are looking, good luck.

Another method is to use winrar to compress the volume, and put it into the U disk after playing the volume.

Hello,First of all,There must be a clerical error in your post.,You said you're a 500G USB flash drive.,I think it should be a portable hard disk.,500G USB flash drive I really haven't seen it.。 Secondly, the FAT32 format of the hard disk, the maximum support of a single file can not exceed 4G, which is limited by the format of the hard disk, you do not change the format, you will definitely not be able to store large-capacity files.

Secondly, you want to convert the partition format losslessly, you try to type "convert d: fs:ntfs v" in "Start" --Run" where d:

It's me who assumes that your mobile hard drive is a D drive, and you must change it according to your own situation when you use it yourself, otherwise you don't blame me for being wrong.

I don't know, I haven't copied more than 4G.