Why does this English appear when the laptop is turned on, and it can t be turned on 5

If it can't be opened, it is recommended to solve it by reinstalling the system.

The system can be installed by following the steps below:

1.The system disc is placed in the optical drive.

2.Turn on the power and then observe the on-screen prompt to press "F2" for BIOS settings before booting the system.

3.Set the startup mode. This setting screen is the BIOS settings.

Find the option of boot, there is a first boot, in English, it is generally 1st boot device (first boot device), there is an option behind, move to it with the cursor, press enter to select the item with *** or cd words, press enter to confirm. Some of the key methods for moving the cursor are the arrow keys of the keyboard, and some are f5 and f6, which are prompted by the screen. Then press F10, select Yes, press Enter to confirm, and then the computer will automatically restart.

4.At this time, boot from the disc at startup, enter the installation system interface, and follow the system prompts, and the installation process will be restarted several times.

Hard disk problem, use GOST with DOS tool to repair the partition table, and then use the PE system to enter the formatted C drive in the desktop and restore the system to the C drive.

Go into the BIOS and see if there are any errors in the system boot device settings. If you are using a hard disk boot system, see if the first boot device is a hard diskIf not, turn it to a hard disk

It may be that the system can't find the hard drive, sometimes good and sometimes bad. It is recommended to mount the system from it.

It's no partition bootable.

No partition bootable: The above error message will appear when the hard drive is installed without a partition.

But don't ignore the problem: if your system is cloned and the D drive is NTFS partitioned, this problem will also occur. If your D drive is in NTFS format, it is recommended to use the installed system, or convert the D drive to FAT32 format and then install the clone system.

You can change the system and see what the reason is.

Oh? My computer is also a problem.,As soon as I turn it on, it comes out of English.,I didn't let it out.,And what age is it.,It's still black and white.,It looks like a black and white TV set before.,Depressed.。

Blue screen? Unplug the power memory module and try to plug it in again. I've also encountered it on my desktop recently.,Keep restarting the blue screen.,Just plug and plug the memory module.。 Good luck.

One-click recovery.,If it doesn't work, restore the appearance settings.,But it's recommended to go to the place where the computer is sold and let him fix it!

The landlord's question, can you say in detail, every computer is turned on in English!

First of all, the power is off, you open the case, unplug the memory, wipe the gold finger, then plug it back in, turn it on and see there.

What appears in English?,Is there a display of the F1 key and the del key.。。 If there is, the battery is dead.

I've had this kind of problem before.

Maybe it's because the last time you played, you forcibly shut down, or the computer was stuck when it was forced to shut down.

If this is still the case, you will keep holding down the switch of the host, do not let go, take this way to shut down, let the computer rest for a while, and then try to turn it on.

Or you take the host apart to see what main chip in it is displaced, and so on.

Reinstall the system, there is a problem with the system boot file, and reinstalling the system can solve the problem; If the computer has an optical drive, insert a system disk and fix it. I hope it can help you, hope to adopt!

Meaning that the boot device was not found.

You go into the BIOS to see if the hard drive is detected, if not then the hard drive may be broken.

If so, you can see if you can use a USB flash drive to enter the PE mounting system.

Generally, it is caused by the error of the first boot setting, and you can enter the BIOS settings.

After entering the BIOS, find the boot option, check if the first boot is a hard disk, if not, then change it.

If there is no hard drive option in it, then open the console and check if the hard drive is not in bad contact.

Press DEL, then find a factory-set model with a similar function, and then save and exit.

When this screen just appeared, press any key to see if you can skip the self-test!

This means that the system is checking the hard disk if it is not shut down normally (it is easy to damage the hard disk if it is not shut down properly).

This English should have a number that changes from 0-100,Wait until 100 will enter the system normally,If it doesn't change for a long time,It is recommended to reinstall the system to try。

It means that you have a hard disk problem, reinstall the system, if it doesn't work, ask customer service, if it's not a brand machine, go to Zhongguancun and wait for the computer ** to ask, see if it can be repaired.