Computer experts, please enter the masters, computer masters, please enter

I have encountered a similar situation before, the reason is that the original graphics card driver is not installed, and finally after installing the same model driver, there has been no machine reboot for no reason, so it is necessary to install the graphics card driver correctly If you are sure that there is no problem with the driver, then see if it is a hardware problem, first consider the graphics card, and then the memory. Note that:When playing with the car, you have to turn off the antivirus software.,I'm using a click.,Don't turn it off.,The card will report an error as a Trojan.,In fact, there is a conflict between the 2 programs.,Turn off the anti-virus software and you can play normally.。

Mine too.,Playing kart antivirus software prompts risky software.,Depressed.。

Hehe, you're in the same situation as me, I'm worse than you, I'm just 2 rounds, yours is a problem with the operating system, I changed the system, and it would be nice to change to a better system, and it's better to sp2 sp1 is particularly bad.

Intel 810 integrated graphics.

Mine doesn't work either.

I can't open a stand-alone version of the program.

Isn't it, you go on stage to receive your prize every set?? It's so powerful, is it poisoned by the plug-in?

If I'm not mistaken, your hard drive is a SATA drive. Generally, only SATA hard drives will have this situation when the redo system is not complete.

Actually, don't worry about it yet, the solution is not nothing.

When this happens, we generally use the following methods to solve it:

1 Reseat your hard drive and go into the BIOS to see if it is properly recognized. If it can be correctly recognized, reboot it and put it into the system disk to see if it can be installed. If you don't recognize or can't install it, see option 2

2 Remove this disk and put it on another machine to identify it first. Generally, it can be identified, and then the system is made on this machine first, without installing any drives. Then reinsert the hard disk of the system into the original machine, boot it into the system and then do the drive.

3 If neither of the two machines is recognized. Then you have to send it to the place where the hard drive was repaired to take a look. If you don't have important files, try repairing the hard drive, or low-handed.

If that doesn't work, you can only try to back up the data with a special machine, and then you can buy a new hard drive and copy it in.

The inability to install is not necessarily a problem with the hard disk, it may also be a problem with your optical disc, try a different system disk.

As for the hard drive that is not detected during the hard drive repair, don't worry about this, it is the reason for the repair software.

Enter the BIOS to format the system disk, and then install it, I don't know what version of your BIOS, you can go to the Internet to see it yourself, the specific operation.

Take a look at the cable or power connector.

Suggestion: It may not be a hard disk problem, but a memory problem, try it in PE, can it be normal, use.