What is CNC Rebar Hoop Bending Machine? Please tell me

One of the steel processing machinery.

The steel bar bending machine belongs to an improvement of the structure of the steel bar bending machine. The utility model comprises a reducer, a large gear, a pinion, a curved disc surface, and is characterized in.

In the structure: the two-stage brake motor and the reducer are directly connected for one-stage deceleration; The pinion and the large gear mesh cooperate with the two-stage deceleration; The big gear always drives the curved disc surface.

Revolve; Be provided with central shaft hole and a plurality of bending shaft holes on the bending disc surface; A plurality of positioning shaft holes are respectively arranged on the positioning square bar of workbench surface. Due to the two-stage.

The brake motor and the reducer are directly connected for one-stage deceleration, the input and output speed ratios are accurate, the bending speed is stable and accurate, and the electrical automatic control conversion can be used.

speed, brakes to ensure bending angles. Using the forward and reverse rotation of the motor, the steel bar is bent in both directions. The central shaft is replaceable for easy servicing. Yes.

Intelligent control.

The operating procedures of the steel bar hoop bending machine and its precautions:

1. Check whether the mechanical properties are good, and the table and bending machine table are kept horizontal; And prepare a variety of mandrel tool stops.

2. According to the diameter of the processed steel bar and the requirements of the hoop bending machine, install the mandrel, forming shaft, retaining iron shaft or variable baffle, and the diameter of the mandrel should be multiple of the diameter of the steel bar.

3. Check the mandrel, stopper, turntable should be free of damage and cracks, the protective cover should be fastened reliably, and the operation can only be carried out after the empty machine is confirmed to be normal.

Fourth, during the operation, the end of the steel bar to be bent is inserted into the gap fixed by the turntable, and the other end is fixed close to the fuselage and pressed by hand, check the fuselage fixation, and it can only be started when it is installed on the side that blocks the steel bar.

6. When bending steel bars, it is strictly forbidden to process steel bars that exceed the mechanical regulations, such as diameter, number of roots and mechanical speed.

7. When bending high-hardness or low-alloy steel bars, the maximum limit diameter of the label should be changed according to the provisions of the mechanical nameplate, and the corresponding mandrel should be replaced.

8. It is strictly forbidden to stand within the operating radius of the bent steel bar and on the side of the fuselage without a fixed one. The bent semi-finished products should be stacked neatly, and the hooks should not be facing upward.

9. When the turntable is reversed, it must be carried out after it is stopped. 10. After the operation is completed, the site is cleaned up, the machinery is maintained, and the power is cut off and the lock box is lost.

CNC steel bar hoop bending machine is a kind of mechanical equipment widely used in engineering production, due to the high scientific and technological content, superb and rigorous technology, so the probability of failure is reduced when used, which improves work efficiency, and achieves the characteristics of reducing consumption, reducing noise and reducing vibration. The CNC hoop bending machine can generally be completed by only two people when operating, which is relatively simple and easy to use, and also convenient to move. It has played an important role in the construction and development of many large-scale civil engineering projects such as buildings and bridges, and has greatly accelerated the progress of the project.

1. The selection of automatic CNC steel bar hoop bending machine needs to consider the model, type, power supply voltage, rated voltage, implementation quality standards, input speed and other factors, such as the type of steel bar bending machine, steel bar straightening machine, steel bar cutting machine, steel bar arc bending machine, etc.; The implementation of quality standards includes national standards, British standards, industry standards, etc.; The rated voltage is 220V, 110V, 440V, 120V, etc.

The ** of automatic CNC steel bar hoop bending machine is about tens of thousands of yuan per unit.

Before you choose, it is recommended that you fully understand and compare the automatic CNC steel bar hoop bending machine, and you can consult Kairien Machinery Manufacturing ****.

2. If I have to say which one is better, I think the first thing that comes to mind should be (the five heads of Kairien Steel Machinery Factory).

3. There are many models, and the performance is not the same.

4. Kerryon is relatively cost-effective.

Of course, it's a manual hoop bending machine, do you have a large factory assembly line operation, buying CNC is simply a waste! Besides, manual hoop bending machine for ordinary rebar workers or ordinary people can be operated with simple training! The numerical control is generally not easy to operate, and if there is a fault, it will outweigh the losses.

If you have to say which one is good, I think the first thing that comes to mind should be (Hebei Jianai CNC).

I haven't touched this yet, and in the end I still have to choose by myself, so I can compare it more and see which one is more suitable.

Generally speaking, you don't know much, you can make a comparison according to your own situation, and then choose the one that suits you better.

Straighten the steel bar bending machine with several hands, first set the length, and then press the potato ear tightly and loosen the cloth to debug, and set the number to complete the start.

How to master the straightening skills of the CNC steel bar hoop bending machine in the diagram -- fixed straightening wheel -- movable straightening wheel, 12 -- direction control wheel straightening principle analysis: when the steel bar moves to the right, the wheel participates in the straightening work, and the movable straightening wheel is adjusted up and down through the trouser bush, and a certain straightening effect can be achieved by destroying the forest. Adjust the direction up and down to control the pure mu control wheel, you can control the up and down position of the output of the steel bar.

Straightening adjustment method: 1. Press the movable straightening wheel from tight to loose. 2. the amount of pressure of movable straightening wheel 11 and direction control wheel 12 is subject to contact the surface of steel bar without deforming steel bar.

3. If the output steel bar is bent upward, adjust the direction control wheel downward. The reverse is the same.

CNC steel bar hoop bending machine manufacturers have Xingtai Haihui Machine Tool Co., Ltd.

Xingtai Haihui Machine Tool Co., Ltd. mainly produces steel bar bending machine, steel bar straightening machine, steel bar bending machine, steel bar cutting machine, steel cage winding machine, spiral bar forming machine, five head bending machine, steel bar bending center, CNC plus automatic professional brand, especially the production of 4 to 10 CNC steel bar bending machine, the output and sales have achieved good results, and exported overseas, in 2007 was rated as a provincial well-known business enterprise by Hebei Province.

Through a series of measures such as the certification of the quality management system, the construction of new plants, and the training of employees, Haihui Company has reached a new level, and the annual sales output is developing in several times increments. Customer-centric, customer-oriented, continue to provide products and services that exceed customer expectations, and become a permanent partner of customers. This is the service concept that we have always adhered to and advocated.

Characteristics of rebar CNC hoop bending machine

It consists of two sets of horizontal and vertical self-adjusting straightening wheels, combined with 4 traction wheels, driven by imported servo motors, to ensure that the straightening of the rebar reaches the best accuracy.

Bending and shearing mechanism to attack the beam: driven by imported servo motor, the bending arm can rotate and telescopic at high speed, and the shearing mechanism completes the shearing action at high speed to ensure the bending accuracy of the steel bar.

Control system: The machine adopts foreign mature control system, with high reliability. The control system has the function of fault identification and alarm.

It can design up to 60 corners of any shape of ancient and modern and contour graphics, can store more than thousands of different product shapes, and has a storage graphics library, so as to produce a large variety of products.

Able to continuously produce products of any shape without the need for mechanical balancing; There is also no need to interrupt the machining when correcting the bending angle.

The choice of automatic CNC steel bar hoop bending machine needs to consider the model, type, power supply voltage, rated voltage, implementation quality standards, input speed and other factors, such as the types of steel bar reed such as bending machine, steel bar straightening machine, steel bar cutting machine, steel bar arc bending machine, etc.

They are the material rack, the horizontal straightening mechanism, the feeding mechanism, the vertical straightening mechanism, the bending mechanism, the cutting mechanism, the rack part, and the electrical control accompanying part. Equipment model: KZ12B, single wire processing (round bar) 5-- 12 (rebar) 5-- 10, double wire machining (round bar) 5-- 10 (rebar) 5-- 8.

Structure and composition:

1. Straightening part: The straightening part is composed of 24 straightening rollers, and the straightening roller is driven by the motor V-belt wheel transmission system and the reducer, and the straightening roller is composed of 12 rollers up and down and 12 horizontal rollers, and the straightening of the steel bar is achieved by adjusting the amount of the movable straightening roller.

2. Hydraulic shearing part: The hydraulic shearing part is driven by a 4kw motor to drive the hydraulic pump, solenoid valve and relief valve to control the shut-off cylinder. The cutting device is installed at the front end of the bending hoop part, and the signal is given by the travel switch of the bending hoop part during work, and the cutting and the bending hoop are running synchronously.

3. Electrical control device: The electrical control device electrical appliance is mainly composed of straightening motor, hoop motor, hydraulic system motor, solenoid valve, console, length control travel switch and circuit.

Summary. In.

In. Straightening adjustment method: 1

Press the movable straightening wheel from tight to loose. 2.The movable straightening wheel 11 and the direction control wheel 12 are pressed down to contact the surface of the reinforcement without deforming the reinforcement as the calling criterion.

3.If the output of the rising steel bar is bent upward, adjust the direction control wheel downward. The same is true for the destruction of bridges.