What should I do if the electronic scale is not allowed?

It is necessary to determine whether there is a problem with the contact of the scale battery, if there is a problem with the contact, it will cause the scale to display inaccurately. When the battery of the electronic scale is out of power, there will be a prompt "lo", remember to replace the battery in time.

Then put the electronic scale on a solid and flat ground, if the ground is uneven or the ground is tough (such as carpet, etc.), it will cause the four legs of the electronic scale to be unevenly stressed and the electronic scale measurement is inaccurate.

Stand upright on the scale with your feet upright, and don't shake your body from side to side. Do not weigh on one foot or in a squatting position, as this will result in inaccurate weighing.

If there is a moving scale position for the first time, do not count, because the current electronics are four-legged sensing data automatic power on/off, the use of the general four-legged off the ground for the first time will have its own weight (generally heavy or light), it is recommended to see if the back is the same.

If the measurement is consistent with the above methods, but there is a deviation from the actual weight, you can also find a physical object with a calibrated weight to measure (such as a bag of rice in the supermarket!). If the error is large, it means that there is a problem inside the electronic scale, and you need to contact the manufacturer to recalibrate.

How to adjust the electronic scale if it is not accurate?

1. Confirm whether the battery is charged.

Check whether the battery of the scale is sufficient and the battery is dead.

It should be replaced in time, and insufficient power will also cause the electronic scale to display.

Inaccurate. In actual use, 60% of electronic scales have common problems.

Often, it won't turn on or the battery is too low. When the battery is low, electrons.

The scale may be slow to respond or the reading will not be accurate. So, it must be timely.

Replace the battery (and use only good quality batteries as prescribed). No.

If you don't use the scale for a long time, please take out the battery just in case.

Battery leakage damages the scale.

2. Confirm whether it is placed incorrectly.

The scale should be placed horizontally on the floor, but if the scale.

One side is high and the other is low, or there is an elevation angle with the horizontal plane.

Yes. Resulting in inaccurate weighing. The electronic scale is on the water platform before leaving the factory.

When the customer uses it on an uneven or uneven table, the weighing will be inaccurate. Preferably.

Use on a relatively flat or level countertop, and in this position.

Put on the recalibration machine, so that you can avoid uneven countertops.

The whole leads to the problem of inaccurate weighing. In addition, it should be used when using.

The scale is placed on a flat and hard ground, and there is no debris under the scale.

3. Confirm the standing posture when weighing.

Whether it's correct or not. Confirm whether the standing posture is correct when weighing, and ask for both feet to be upright.

Stand on the scale without shaking your body from side to side. Neither.

You can weigh yourself on one foot or in a squatting position, which will also guide you.

Inaccurate weighing.

4. Weigh several times to take the average value.

When weighing, it is best to weigh several times and take the average value. Weigh it out like this.

The weight is more accurate.

You can carry out a calibration, find the electronic scale after-sales service, find the relevant departments, in short, do not disassemble the electronic scale without technical personnel, so as not to affect the stability and accuracy of the electronic scale. Zhengzhou electronic scales are at your service.

I'm making electronic scales, you can recalibrate the scales and it's fine, the electronic scales have to be recalibrated every once in a while.

1. Determine whether the battery of the electronic scale is sufficient, and replace the battery when the battery is out of power and guess the bend friend, and the insufficient power will lead to the inaccurate display of the electronic scale.

2. Place the electronic scale horizontally on the floor, if the electronic scale is high and low, or there is an elevation angle with the horizontal acacia surface, it will lead to inaccurate weighing.

3. Stand upright on the electronic scale with both feet, and do not shake your body from side to side. Do not weigh on one foot or in a squatting position, as this will result in inaccurate weighing.

4. According to the method of step three, each weight is weighed five times, and the average value is taken. In this way, the weight of the scale is more accurate. Note that when weighing, the weight should not exceed the maximum weight of the electronic scale.

5. Find another accurate electronic socks scale for weighing, take the average value for comparison, if the error is large, it means that there is a problem inside the electronic scale.