I use a laptop to connect to the router, and I use a fixed IP, how to set up iphone4s to connect to

If the router does not have DHCP turned on

Then the iPhone should also set a fixed IP

You can use it on the same network segment as your notebook.

For example: notebooks.

Then iPhone: It should work.

The subnet mask and gateway (router) settings are the same.

The specific setup method is:

There is a blue arrow on the back.

After clicking on it, select Static IP address.

Then you're done setting it up.

If DHCP is enabled on the router

Just connect it with your iPhone.

Hope it helps

With a wireless router. Set up the wireless network configuration and name on your computer.

Then turn on the wireless network with the same name set by wifi search on the mobile phone, and connect to it after finding it.

1.Go to your phone's Wi-Fi, find your router in the network options, and then there is a triangle arrow on the far right of your router options, click on it; After that, there are three under the IP address options, the default is DHCP, you have to choose static, and then just like setting up a notebook, you can enter your fixed IP address or something!

2.The easiest way to do this is to go into your router and turn on the DHCP option! Just let your phone get an IP address automatically! But be careful that others rub the net!

cmd, run the arp -a command to view the IP addresses of all hosts in your LAN.

Start Menu > > > > > > > > > > > > > > > > > > > > > > > >

The router you bought back doesn't have a manual.

It's all fool-like operation, you don't have to set the IP yourself, it has the function of automatically getting the IP, as long as it is the router you recently bought, the installation has been simplified to 2 steps, the network cable is connected to the router, and the router is connected to the computer.

Enter the address in your browser.

Account and password admin

Set the option to get an IP connection automatically.

The router manual has settings

DHCP is enabled by default for general routes

Automatically get the address, turn on DHCP, enter the router, look for DHCP, and then enable, if you really can't do it, restore the router to the factory, and then follow its wizard to get OK

Just turn on the DHCP of your router.

Connect the router with a wired computer, enter the web management interface, and turn on DHCP.

Log in to the router, click on WAN settings, and enable DHCP service.

It doesn't matter if the router is 2 hands, set the static IP and MAC address of the router.

Mac filtering is the process of specifying whether a machine with certain network card addresses can or cannot access the Internet.

Generally, you don't need to set up MAC filtering at home.

thinkpad sl410 2842evc

Impressions after two days of use (4800 purchases).

1. The appearance is indeed beautiful. 2. Good heat dissipation. 3. There is no noise during heat dissipation.

Regardless of whether it is second-hand, you have to set up a router, if your home is a static IP, you have to set up that static IP for the router, and then set the IP address segment of the router, starting from how many to how many ends, and then, the IP of your notebook and desktop computer can be as long as it is within this range, in no particular order, but it can't be the same.

There are two kinds of MAC filtering,Specify the MAC that can connect to the router and the MAC that can't connect,As the name suggests,Specify the MAC address that can be connected is the MAC address you fill in to access the Internet through your router,None of the others can be,The other is the opposite。

Laptops and desktops should choose to automatically obtain an IP address, otherwise they will not be able to access the Internet.

You need to adjust the DHCP

Set a fixed IP address on your laptop

Then this IP is not in the address pool that DHCP automatically assigns, so that no one else will take your IP.

After the router is set up, you must restart the router before your binding and other content will take effect, and make sure that your IP and MAC address binding is checked to take effect.

MAC binding is just to prevent ARP binding,Fixed IP allocation binding also has a fixed assignment in DHCP,You want to assign there,I guess it's your assigned IP address conflict,Because of the binding, it can't be displayed and can't access the Internet。

What you mean is not to limit the computer, everything else is restricted, there is a simple way, you don't want to restrict the set to a fixed IP, for example, and then set the DCHP address in the router, from the beginning, so that when the speed is limited, the speed is directly limited from the beginning. Other terminals are automatically obtained by obtaining IP, so they are all speed limited. That's how I got it, it turns out that it can, I hope it can help you, if you have any questions, please ask.

Set the IP range, 101-103 if you are 101 next time or 101 computer too.

It is most convenient to reset the router and reset it.

Turn off the router for 10 seconds and turn it on!

Your problem is that if you want to use wireless Internet access, you must ensure 4 points:

1. A wireless connection has been created and enabled.

2.Automatically obtain the IP address live for manual settings (manual settings are recommended).

3.The wireless driver is already installed (you can check it in my computer's --- Properties-->Management--- Device Manager).

4.If a password is set for the wireless router, you also need to enter the password when connecting to connect successfully.

Note: A computer with both wired and wireless connections is of course possible.

Turn on both local and Wi-Fi. It should work well. But if you go online, you should only go one of them.

Connect two or use one in data exchange, not both at the same time

If you connect the network cable correctly, the IP address will be automatically obtained

Set up automatic get, and set up automatic for both routers and laptops.