What to do if the TAG Heuer watch warranty hand is not accurate

What should I do if my watch's hands are rusty? Rusty hands of the watch are rare. Normally, the hands of the watch do not rust.

If the hands of the watch are rusty, it means that the watch has been flooded. When the hands of a watch rust, they can thicken and scratch the dial, creating curved rust spots on the dial, which are often difficult to remove. Therefore, when the hands of the watch rust and scratch the dial, it should be pulled out to stop and then sent to the after-sales service center for disposal.

If the rust is not severe, simply remove the pointer and wipe it with a cotton cloth. If it rusts, you need to soak it in oil to wipe it off. If the rust and oxidation are severe, the pointer can be replaced again.

Rusty watch hands should be sent to after-sales or repair shops for disposal in time. Rusty hands not only affect the appearance, but also scratch the dial. At the same time, the rust of the watch's hands also indicates that the watch has been watered.

If left untreated, the water vapor in the watch can corrode the movement, causing rust to form inside the movement, which will seriously affect the accuracy of the watch. The core is corrupted.

1.Insufficient power: mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of movement, and it can be directly manually wound to supplement the power.

2.No maintenance: mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear for a long time will produce iron filings, increase the friction between the gears, this kind of problem only needs to clean the movement, re-refueling.

3.Shock: A mechanical watch has a complex structure and is composed of hundreds of precision parts, which is very fragile, and the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop.

According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

4.Hairspring failure, hairspring failure is also one of the reasons for the mechanical watch steal stop, the above mentioned lack of power caused by steal stop, on the contrary, if the amount of exercise is too large, the clockwork is relatively tight and causes the failure of the upper bar mechanism, it will also cause insufficient power, this situation generally occurs at about 9 o'clock to 12 o'clock in the evening, at this time, the watch with calendar function turns the roulette wheel, which will lead to insufficient power calendar jam to stop the watch. This kind of technical failure also needs to be tested and repaired by a professional watch repair shop.

5.Watch magnetization: Watch magnetization is one of the common reasons for the inaccuracy of the watch, even if it is an anti-magnetic watch, even if it is an anti-magnetic watch, it cannot be placed next to electrical appliances with magnetic fields, such as TV, automatic mahjong machine, etc.

Because some of his parts are not anti-magnetic, they will still be magnetized over time. The watch is magnetized and needs to be demagnetized by a professional watch repair facility.

The accuracy of a watch (yours should be a non-sport watch) depends mainly on two factors: the most important internal factor is the precision of the movement's oscillator (basically the accuracy of the classical pendulum, the "ordinary hairspring", the tourbillon, the electronic quartz, the atomic clock); In addition, the mechanical losses during the transfer of momentum (kinetic energy) can also have an effect, such as the weight of the watch hands and the friction between the components. The so-called external factors, such as the way of belting, are more affected by vibration, is there more magnetic field around, such as computers, induction cookers, etc., are there any foreign objects entering?

The watch hands have no rubbing against the dial or the surface, etc. Like you say, if it's a problem with a new watch, if it's not hand friction, it's a very sad mentally handicapped movement.

If the watch suddenly has an abnormality, it is likely that it is due to magnetism. In daily life, all kinds of electrical appliances and equipment have magnetic components, including refrigerator doors, audio speakers, electric mahjong tables, etc., many consumers do not have any awareness of this when wearing watches, and the most effective way to demagnetize is to demagnetize the demagnetizer. But be sure to remember to go to a regular and professional watch repair center to avoid some black-hearted watch repair shops to fix a bunch of problems.

The power of the automatic watch** mainly comes from the wearer's wrist activity, and the tabletop of the watch swings when the arm moves, so as to wind the watch, so when the wearer usually does not move much or does not wear it for a long time, the string force will be insufficient or empty, resulting in the watch not being allowed to go incorrectly or stopping. Ask the TA official**.

Five common reasons for watch time error and watch time inaccuracy:

1) Insufficient power reserve: You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can replenish the power by manual winding, and then observe whether it continues to have the phenomenon of fast and slow.

2) Insufficient power: If the quartz watch suddenly finds that it is slow, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power.

3) Hit or hit: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time. This is to be dealt with in a timely manner.

4) Need to maintain: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, which need to be maintained, and need to be sent to the designated maintenance point for maintenance services.

5) In addition to the above common situations, the watch is affected by some ambient temperatures: if the hairspring of the watch is magnetized, the watch will not be accurate.

There is a term for phase watches, called normal error value, not to mention the standards of the chronometer and other certifications, quartz watches allow a daily error value of (plus or minus) seconds, and mechanical watches allow a daily error value of (plus or minus) 30 seconds. Here, the automatic watch is kept accurate if it is worn for more than 6 hours a day to ensure that it has sufficient power. Except for the long power of the manual mechanical watch, the regular power maintains the good habit of stringing every night, and it can only be accurate when the power is sufficient.

Lack of power is a major cause of running time. If there is a magnetic field around, it will affect the speed of the meter.

Whether your watch is worth 1,000 pieces or 10 million, as long as it is a mechanical watch, there is an error, which is much larger than hundreds of quartz watches, and no mechanical watch can be absolutely accurate. Of course, the error value of a senior watch enthusiast compared to a mechanical watch is also the fun of a mechanical watch.

The accuracy of a mechanical watch is greatly affected by external influences, such as magnetic fields, gravity, temperature, and violent impacts during activity. If the watch has a time error of more than 30 seconds under the condition of sufficient power, it is recommended to go to the warranty point Hangzhou Qianjiang Road China Resources Building B 2606 for testing and correction. Mechanical watches need to be serviced once every three to five years.

TAG Heuer watch warranty watch hands are not allowed after-sales maintenance location in Shanghai Huangpu District Huaihai Middle Road No. 283 Huaihai Road 11th Floor Office Building 11th Floor Room 04-05, TAG Heuer after-sales maintenance - balance spring balance: the general swing frame hairspring, its center of gravity changes with the change of the balance angle of the swing angle, under the action of gravity, it will produce position error. With a TAG Heuer hairspring, the center shrinks and the center of gravity does not change with the swing angle.

The cylindrical hairspring of the Philip terminal curve is used symmetrically up and down. Straight hairspring can also be used, some people have used spherical hairspring in history, the performance is superior, but the manufacturability is very poor, and it is rarely used in practice.

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

1. Do not wear it in an environment with a large temperature difference, so as to avoid the thermal expansion and contraction of the sealing ring and lose the sealing effect.

2. Do not touch objects with strong magnetism to avoid moving faster after being magnetized.

3. Do not exercise vigorously or bump the watch when wearing.

4. Maintain enough exercise to make it operate normally.

5. Maintain it every 3-5 years, and clean and oil it noisy.

1. Do not wear it in an environment with a large temperature difference, so as not to lose the sealing effect of the sealing ring of the elderly.

2. Do not touch objects with strong magnetism to avoid the watch going fast after being magnetized.

3. Do not exercise vigorously or bump the watch when wearing. Sparrows.

4. Maintain enough exercise to make it run normally.

5. Maintain every 3-5 years, clean and oil.

In fact, there are many reasons why mechanical watches do not go, such as: bumps, movement gear misalignment, magnetization of the watch, shelving for a long time, sludge drying, etc., generally divided into two kinds, the first is because of insufficient kinetic energy. The second is due to a malfunction of the mechanical watch.

Therefore, don't panic too much when you find that the mechanical watch is not leaving, and first distinguish which kind of big one it belongs to.

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the store for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy.

3. Having been beaten or impacted. The watch is very tight, if it is hit or dropped, it may cause loose damage to the internal parts, and it may also cause time problems, so it is recommended to go to the store for testing.

4. Maintenance is required. A lack of oil or wear and tear of the internal parts of the movement can cause time-keeping problems and require maintenance.

5. Under the influence of ambient temperature, the watch is magnetized: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the error of the time, which will be sent to the store.

Note: 1. Mechanical watches vary according to the model and manufacturing quality of the movement, and the error of the general watch within 30 seconds per day is within the normal range. Some of the higher precision movements can reach around 10 seconds.

1.The power of the table is insufficient.

An automatic watch only needs to be wound by moving your arm, but if you don't exercise much, or if you don't wear your watch for too long, the watch may not be able to run out of time or stop due to lack of power. Of course, you don't have to throw your arms as a hula hoop in order to wind your watch, just move normally.

2.Wearing time is too short.

If it's really caused by too little exercise, don't worry, just take off your watch and shake it horizontally for about 2 minutes before going to bed, and of course you can also shake it for 4 minutes, because then it can walk longer. If your watch can be wound, you can also wind it clockwise. In order for your watch to last longer, it is recommended to have him wear it on your wrist for at least 6 to 8 hours a day.

3.Hairspring failure.

If neither of the above two reasons is the case, it may be the cause of the hairspring. If you exercise too much, the clockwork will be tighter. If it is really a lack of power caused by the winding, usually between 9 and 12 o'clock in the evening, the "calendar function table" at this time his needle wheel began to drive the calendar wheel, the load is large, the watch is tired, at this time if the power is insufficient and no one pushes it, it is easy to stop.

During this time, don't reverse the dial, many mechanical watches have a plastic calendar wheel, and if you are not careful, you will break the gear, if you break the tooth, it will be stuck at this time every day, or it will no longer jump until a fixed date. That's why the mechanical watch stopped.

4.Bump failure.

The parts of the watch are very delicate and small, if you are careless and accidentally bump into it, or if you are healthy and bump into it. This can easily cause the movement parts to fall off or break directly.

All automatic watches must be worn or wound regularly in order to function properly. If the mechanism stops working for a long time, it will cause the watch to deteriorate for a long time. Generally speaking, the power reserve of a large three-hand watch is probably no more than 38 hours, which means that if you do not wear the watch for more than 45 hours, the watch will eventually stop due to the exhaustion of the mainspring.

If you only have one or two automatic watches in your collection, you won't have to worry about wearing them often or stopping them to wind them in order to wind them. But if you have a large collection of mechanical watches, you have to make sure that all the watches don't stop, and everyone will feel a headache and trouble.