Wallpaper is moldy and difficult to deal with, is seamless wall covering really the best choice for

Nowadays, there are often a lot of choices when decorating the walls of the house, such as the most ancient paint, to the later wallpaper, and then to the more popular seamless wall covering, which can be used to decorate the walls of the house. Many people say that although the wallpaper is beautiful, it is easy to have mold on a rainy dayOnce there is a mold spot, it will inevitably look very ugly. As a result, more and more people are using wallcoverings nowadays, and I think this is also because seamless wallcovering does have a lot of advantages.

First of all, it can be pasted seamlessly, often the standard height of seamless wallcovering is about meters, which can make the whole wall seamlessDeal with pattern mismatches, seams without spillage, seamless walls with special adhesives and no odors。The environmental protection standard meets the requirements of the national interior decoration code and can be used on the day of construction. And you can move in after the construction is completed.

Secondly, for the wall cloth, the construction is very convenient, the vertical paste can use the gravity of the wall itself, the vertical air can be used at will, improve the construction efficiency, the construction cost is absolutely low. Moreover,Compared with wallpaper, wallcovering is more breathable, mildew-proof and anti-corrosion。This is because the coating of seamless wallcovering has excellent breathability, mildew resistance, water resistance, stain resistance, mildew resistance, oil resistance, and is not easy to mold and rot compared to the forced adhesive.

Seamless wall coverings are durable because they drain moisture from the walls through small holes, preventing mold and scattering on the walls.

In addition,The wallcovering is also relatively simple to care for. The seamless wallcovering is treated with anti-grease contamination and waterproofing through a special process, which can be scrubbed with a damp towel to keep the wall smooth and clean. Seamless wallcovering adheres to a high standard of waterproofing and sun protection.

Under normal circumstances, it ensures that the gloss of the wall paint does not fade and dull.

The cost of wall cloth is high, the loss is high, and the decoration cost is increased, and the real effect of the paste is similar to that of wallpaper.

No, it would be better to use latex paint in a new house and consider the amount of wallpaper.

No, seamless can only reduce the chance of mold to a large extent, and the wallpaper can also achieve the effect of wall cloth when it is seamless.

Stained wallpaper can be wiped with a wet towel, and the wallpaper stain must be replaced.

The wallpaper can also achieve a good effect after being laid, first of all, the primer must be dried, and then brushed with the wallpaper base film, which will generally not be moldy.

I think anything that should be moldy should be moldy, but wallcovering may be better than wallpaper.

Not all, for example, the wallpaper can also achieve the effect of the wall cloth when it is seamless.

Wallpaper is prone to moisture, deformation, and fading, and to a large extent it will be more practical to use wall covering.

No, seamless wallcovering is more breathable and mildew-resistant than wallpaper.

Seamless cloth is relatively environmentally friendly, with more advanced technology, tasteless and non-toxic.

Many people must have a clear reason not to be a liquid such as the moldy wallpaper itself, but to the cause of the walls. First of all, a lot of quality, but the exterior walls, easy to seep into the case of water, easy to produce moldy wallpaper, and treatment methods.

What's going on with the moldy wallpaper on the wall

First: If the construction, the glue is not completely dry, there is no air flow inside and outside or too much temperature, humidity and air lead to long-term retention in the wallpaper, wallpaper Alice shoots from the dark and mold, etc.

Second: if you experience big summer and autumn rain, humidity, etc. It also makes it easy to make moldy wallpapers.

How to treat moldy wallpaper.

Step 1: Mild mildew: Wallpaper, wall surface with slight molding, but little impact on the original surface from the outside, this is a slight mildew.

Just spray the mold agent on the wallpaper or cover the wall (may cause discoloration and need to be tested in a large area in advance), and then you need to spray the mold in the mold room to see the mold and then you need to spray the fungicide should be lent pay attention to ventilation and drying. Avoid rusting directly with a towel, and use the child's area to create a larger shell.

Step 2: Moderate mildew: wallpaper, wallcovering, not only visible mold surface, wall mildew is also coming, wallpaper has appeared Alice, curling, etc.

When processing, we need to break the old wallpaper or wall covering, spray, remove the mold mold agent to break down the buns, and then spray the fungicide. After cleaning the walls, apply the base film and place the wallpaper or wall cloth.

Step 3: Severe mold: In addition to the chalk wall, the mildew is moderately stratified in the base layer, without any adhesion.

This typical filtration situation has already occurred, to find the cause of the filtration treatment, re-waterproofing, putty wall everything, can only **, and then spray mold killers, antifungal agents. After drying, grinding, brushing the base film, wait for all approved putty, and finally apply.

How to prevent mold in wallpaper?

Step 1: Wallpaper selection of breathable material. There are many materials for wallpaper, wallpaper buried PVC breathable material, non-woven fabric, plain paper, fiber, fiber, non-woven fabric or similar.

Step 2: Keep the walls dry. In general, a new cement worker should stay on for 20 to 40 days to make wallpaper.

It is necessary not to allow unconventional buildings to mix inappropriate wall meals and sea sand. Due to its high salt content, it easily absorbs water. Hidden hidden questions in case of wall problems later.

The above is trueWhat's going on with the moldy wallpaper on the wallThe introduction of hopeWhat's going on with the moldy wallpaper on the wallHelpful to you.

You can get it for free

1. When there are mildew stains on the wall, brush off the mildew stains with a dry toothbrush, and then gently wipe it with a soft cloth dipped in alcohol to dry the wall and prevent mold from growing.

2. Add bleach and water to the spray bottle at a ratio of 1:99 and spray it on the moldy wall to solve the moldy wall problem immediately.

3. Wipe the wall with a rag and then wash it with water. After the wall is dry, brush with anti-mildew paint to prevent long-term moisture. In addition, there is also a portable waterproof repair agent for household use.

Simply spray it like an insecticide in the cracks of leaky walls and floors, and it's very convenient to operate.

If the wallpaper is moldy and damaged, it is recommended to replace it, because the repaired wallpaper will have color differences, which will affect the appearance. If the small area of wallpaper is moldy and damaged, you can scrape the putty in the moldy position and then apply the base film, the problem is not very big, just deal with it carefully.

It is best to replace them all, if the exterior is moldy, then the interior is already extremely serious, and now there are many new decoration materials, not only antibacterial and mildew-proof, the overall effect is much better than wallpaper.

Replace it, because once the wallpaper is moldy, even if you remedy it, there is no way, it is better to replace it directly.

If the wall is moldy, it will be troublesome to deal with, and the moldy wall needs to be smoothed and cleaned up, and then the paint anti-mildew agent is added to the paint, and the appropriate proportion is added, and it will not grow mold after brushing again. Try to keep your home clean, dry and ventilated as much as possible, which can also reduce the risk of mildew, and long-term survival in a moldy environment is not good for yourself and your family. When you find mold on the walls at home, it's time to find out the cause of the mold.

What causes the mold on the wall, whether it is the wall itself or the decoration construction, and the cause of the damp environment. Although everyone knows that the mold on the wall must be caused by moisture, as for what the cause, everyone should check it carefully. So what to do if the wall is moldy, and what are the effective ways to deal with it?

1.If you want to solve the problem of what to do if the wall is moldy, you must first understand the cause of the wall mold. If it is mold caused by water seepage on the exterior wall, you need to do some treatment, the first thing to deal with is the wall, the wall, especially the exterior wall, do a good job of waterproof measures to prevent the mold of the inner wall caused by water seepage, and the use of wallpaper to paste the inner wall to prevent the wall from overtaking, and it is best to paste the wallpaper with waterproof function.

If it is a moldy wall, it is near a window, or an air-conditioning hole. If so, the most direct way is to replace the window, and then solve the problem.

2.There is also a reason for the mold of the wall is the large temperature difference between indoor and outdoor, mainly caused by the unqualified insulation of the external wall, if this is the reason, then it is necessary to increase the thermal insulation performance of the external wall, you can increase the thickness of the insulation board, and then add gypsum board outside, which can alleviate the phenomenon of moisture return.

3.Another reason is the general environment, such as the south, the rainy season is always very long, so you need to pay attention to the ventilation of the room and put wallpaper. There are many causes of mold on the wall, and if you find the cause, you can solve the problem of what to do if the wall is moldy.

The above is some sharing about the causes and solutions of mold on the wall, I hope it will have a certain reference role for you! In short, the quality of the materials selected from the beginning of the decoration is very important, the putty powder should be selected with strong water resistance, and the quality of the wall paint should be excellent. Don't let the original convenience and cheap ideas lead to today's troubles and troubles.

1) The area of mold on the wallpaper is not very large, and the overall appearance has little impact, you can use alcohol or soapy water and other detergents to remove the mold on the wallpaper.

2) The area of wallpaper mold is larger, but it can also be remedied, and now on the market, there are special wallpaper mold removers, which can be used to remove mold in wallpaper. Bleaching powder can also be used to clean, but it should be noted that the concentration of bleaching powder is too high, which will remove the color of the original wallpaper of the wallpaper, and the bleaching powder is corrosive.

3) If the moldy area of the wallpaper is large, and the effect after sterilization is also poor, the original moldy wallpaper can be removed and replaced with a new wallpaper.

Moisture is to see the city, suitable for wallpaper, wallpaper is not troublesome, the seller has a package to install.

Hello, I know a master who sticks wallpaper, it's very good. Master Tao.

Wen Weng turned the professor and did not dare to rely on the sages. 1 Chunxiao Meng Haoran.