How to plating the car? Can car crystal plating be plated by itself?

Automotive crystal plating won't? Professional crystal plating steps for you:

Step 1] Cleaning and decontamination of the body.

Wash the whole car to clean bird droppings, scale, rust, and pulp.

Step 2] Masking.

The part of the car body that has been removed from the paint is protected from abrasive damage.

Step 3] Lacquer polishing.

Removal of paint resin, scratches and other paint problems treatment.

Step 4] Paint restoration.

The oxide layer is removed and the brightness of the paint surface is excited.

Step 5] Clean the body twice.

After polishing, remove the masking, rinse the surface wax grease to avoid residue.

Step 6] Degreasing.

After the mirror is reduced, there will be a layer of oil film on the surface of the paint, and degreasing can remove the oil film on the paint surface.

Step 7] Crystal plating.

A layer of crystals is generated, which improves the brightness of the car paint, improves the effect of flowing water, and resists scratches.

Step 8] Wipe it.

After about 3 minutes, wipe with different towels, taking care to fold the towel to avoid touching the paint surface.

Step 9] Check.

The main thing is to check if the wipe is clean.

Special Tips. Do not rinse the vehicle for one week after plating.

After 4 to 6 months of crystal plating, you can go to the beauty shop for lacquer mirror reduction and repair, so that the paint surface has a better crystal plating effect and a longer lasting time.

Hello! You're talking about buying your own crystal plating and then plating it yourself. If you are a new car, then buy good materials, and then use a special crystal-plated cloth from a starting point to evenly dispense, the general technique is to smear up and down, the next press on the edge of one, to ensure that the full smear does not have omissions, and do not use the amount of mastery, as long as it is painted too much and too little is not good, and then wait for about ten minutes, wipe it clean little by little with a clean soft towel (hard towel rowing), wipe it until the paint surface is bright and there is no flower surface, the paint surface will become uneven, and it is difficult to see after drying.

If it is a car for more than one year, then you can't operate it, because you need to polish before crystal plating, and the polishing technology is very difficult, only a professional master can do it, you need a professional polishing machine and exquisite technology, and the paint surface is easy to leak if the technology is not good. Hope it helps!

Crystal plating can increase the hardness of the paint surface, the protection of the car paint for a long time, is the best choice for many car owners to do beauty projects, hand in hand to teach you the standard of automotive crystal plating construction.

Hello, car plating can be their own construction, the first in the absence of more scratches, if the paint oxide layer or scratches are more, it is recommended to go to the car beauty shop to polish ** normal at 400 yuan, if it is a new car and less scratches can go online to buy a piece of car wash mud to clean the car mud, clean after degreasing, crystal plating, wiping, crystal plating to see what material is if the silicon element crystal content is more than 70 100 for the better quality crystal plating, online ** between 300-700, Some packages are simple** in 1-200 pieces, and the material is the same. The normal wiping is to wipe one piece of two plates after plating, and the time is 5-8 minutes.

Hope it helps.

There is no need to do crystal plating, it is better to come out of the new car directly vehicle film, crystal plating is not as magical as said, and it will not make the paint surface become so-called hard, but during the period of time, the paint surface is really bright, and even the dust can not fall, this effect is there. It's very comfortable to look at. Whether it's crystal plating.

Coating. Sealing glaze. The whole car must be polished first.

The above materials are used in the last process. Moisture is great. For example, a car **2800.

The purchase price of materials is about 700-800. Some even use glaze to pretend to be crystal plating.

Crystal plating is the high-end version of waxing, which is applied to the lacquer surface. In my opinion, plating crystals with thousands of dollars at every turn is more like giving money to beauty shops. It has the advantage of protecting the paint and making it brighter.

But the shelf life is only 1 year, and as you wash your car more often, the paint looks extra shiny and textured. At the same time, crystal plating can also isolate the paint from the air, protect the paint and improve the hardness of the paint. Crystal plating can be said to be the highest level of protection of car paint, of course, it is also relatively expensive, and the technical requirements are relatively high.

The abrasive particles in the wax can form swirling hair scratches on the shiny paint surface, which can be temporarily masked by the wax just after waxing, but the wax will be lost due to temperature changes and car washing, revealing a scratched paint surface, so you have to continue waxing until polishing. The chemical change of this agent on the surface of the paint is used to form a thin, hard and transparent protective layer, so as to protect the paint from external dirt and impurities for a certain period of time, and finally achieve the effect of non-oxidation, easy to clean and beautiful paint.

Crystal plating effect must be there, I read a lot of articles answered by others and feel really ridiculous, crystal plating is simply to form a protective film on the surface of the car paint, to protect the car paint from the impact of flying stones on the road and paint to fall off, will not destroy the paint surface because of small scratches, just help you apply a layer of liquid wax. According to my experience, it is enough to wash the car by yourself, wax once a month, use wool gloves when washing the car, and wash gently while taking water to wash, the effect is very good, and there is no need for car washing liquid.

Crystal plating is, to provide reliable paint sealing technology for car paint, efficient and lasting protection of car paint, to prevent the impact of the environment on the color of the car paint, a water drop experiment shows: after 6 months of use, the surface of the car paint is still perfect, the car paint crystal plating is to distinguish from the concept of coating waxing and sealing glaze, the basic requirement of crystal plating is that the material used is SiO2 inorganic, which can generate several structures on the construction surface, usually the nanoscale of the molecule, Through the action of polymer in the construction surface to form a separator, the separator layer has the function of anti-ultraviolet, anti-oil, low surface energy, hydrophobicity, so as to protect the paint surface, automotive crystal plating is the most cutting-edge automotive paint protection solution, the car beauty care concept to the "protection" level, is the highest level of car beauty.

Scratch resistance: The hardness is up to 6h, compared with the hardness of ordinary car paint 2h, it can prevent most minor scratches, and it has its own elastic recovery function to protect the vehicle from daily minor scratches, so that the paint scratches are reduced by more than 70% compared with the general coating. When the external force exceeds the elastic protection range of the crystal, it generally only leaves scratches on the crystal and will not damage the paint surface.

The function of car crystal plating is to protect the vehicle from daily minor scratches, even when the external force exceeds the elastic protection range of the crystal, it generally only leaves scratches on the crystal, and will not damage the paint surface. Crystal plating isolates the paint surface from the outside world, which can effectively prevent oxidation and resist the corrosion of bird droppings, flying insect slurry, acid rain, etc.

It is used to coat and protect the body or car parts, and in this way, it can also protect the car paint well, and can also prolong the service life of the car parts.

It is to prevent the pollution of the current environment, the damage to the car paint, and even the corrosion of the car paint on rainy days. That's why the car is plated.

Automotive crystal plating has the following effects:

1. Scratch resistance. Diamond crystals are so strong that they can avoid most minor scratches, and they are malleable and resilient.

2. Anti-corrosion. The ultra-fine nanotechnology crystal layer of the diamond crystal separates the paint surface from the outside, which can reasonably resist oxidation and acid rain erosion.

3. No cracking. Diamond crystals are resistant to ultraviolet light, heat and cold, and have a strong degree of integration, and are not easy to crack and fall.

4. Easy to clean. The strong fiber mesh of the diamond crystal will add the subtle holes on the surface of the car, so that the paint surface can achieve a practical effect, and it is easier to clean and maintain.

5. Anti-static. The diamond crystal contains antistatic agents, which make the paint surface less susceptible to smoke and dust.

6. Brighter. Diamond crystals have a crystal structure similar to diamonds, which improves the reflection of light, and promotes a higher color and a crystal clear paint surface.

7. Strong sprinkling. The low interfacial tension of the diamond crystal repels water droplets, and it has strong water solubility and does not touch water.

Crystal plating curing process: After about 3 months of paint plating construction, crystal plating curing can be carried out.

1. Check the condition of the car.

After the order is accepted, the vehicle is thoroughly inspected for scratches and paint stripping.

2. Clean the car body.

Wash your car in front-to-back, top-to-bottom order with a neutral shampoo and carefully wipe the body with a soft towel.

3. Clay treatment.

After rubbing the clay repeatedly, place it in the palm of your hand and move it back and forth with water in a horizontal direction in a range of 50cm to 50cm.

4. Adhesive edge protection.

Use 12mm, 18mm, and 24mm adhesive tape to protect different parts of the car body.

5. Polishing.

According to the actual situation of the paint surface, select the appropriate abrasive for polishing and grinding.

6. Clean the paint dust.

Rinse the whole car carefully with clean water, and then use an absorbent towel with an efficient dry cleaning gun to dry the paint.

7. Degreasing and cleaning.

Degreasing the paint surface is carried out with special degreasing water to prepare the paint surface for curing.

8. Apply paint surface curing agent.

Carefully curing the paint surface with a paint curing agent, referring to the crystal plating standard.

9. Quality inspection of the whole vehicle.

Clean and care for the condition of the paintwork, seams, doors, engine compartment, glass and tires.

10. Delivery.

After confirming that the construction of the whole car is complete, hand over the car to the owner.

1. First do a good job of protecting the car, covering the front windshield, license plate logo and side seams, etc., to prevent the follow-up problems caused by product splashing.

2. Wipe it clean with a polishing cloth after the masking is completed.

3. Degreasing the surface of the car paint.

4. Use ultra-fine dewirling agent and polishing agent to remove the fine scratches of the paint surface, and restore the paint surface at the same time.

5. Finally, use professional crystal plating to wipe the cotton cloth to polish the surface of the car paint6. After completion, gently and evenly apply it to the surface of the car paint within the scope of a small piece of special crystal platingAdvantages: It can form a layer of solid crystals on the surface of the car paint, which can play a real role in protecting the paint surface.

Cons: High. The construction is complex and demanding, and must be carried out by professionally trained crystal plating technicians.

Crystal plating is a car care method that has attracted a lot of attention in recent years. A variety of powerful protective crystals and ultraviolet filter layers are formed on the surface of automobile paint, which can improve the brightness and hardness of the paint mirror, prevent scratches, and prevent damage to the surface of the car by harmful substances such as ultraviolet rays, acid rain, salt, asphalt, flying paint, insect spots, yellow sand and bird droppings. It is like putting on a high-tech "protective coat" for the car paint, which completely isolates any erosion of dust, oil, mold, water molecules and other particles on the car paint itself, and has the effect of anti-ultraviolet, anti-oxidation, anti-friction, non-fading, and increasing the hardness of the paint surface, so that the paint surface can maintain its original bright and gorgeous color for a long time.

Method steps.

Paint clean. Cars often have oil, asphalt, bird droppings, dust, acidic rainwater ...... on the paint surface of the car that has been usedThe combination of long-term adhesion to the paint, combined with sun exposure and high temperatures, can make these mixtures difficult to wash off with water. Therefore, if you want to completely remove the stolen goods adhered to the car paint, you will generally use the center car wash liquid to wash the car, and then carefully clean the body with clay to ensure that the car paint is clean.

Protective and paint polishing restoration. Automobile crystal plating is suitable for new cars and old cars, because the paint polishing reduction can throw away the oxide layer on the car paint, and restore the paint to the color and brightness of the factory, this operation is relatively high for the technician, the technician should master the characteristics of different materials of the car paint, according to the degree of oxidation to choose different polishing agents and polishing discs to polish the car paint, for the old car, this step is the most time-consuming.

Degreasing and crystallizing construction, after polishing and reducing the car paint bright as new, the crystalline plating solution is evenly applied to the car paint during the crystal-plating construction, and then the formation of the crystal-plating layer is accelerated by wiping, the construction of the whole car to apply the crystal-plating solution should be carried out twice, after the coating can be obvious to see the crystal effect, the best effect is achieved after the construction twice, and the advantages of increasing the brightness of the car paint are fully displayed.

Allow to dry naturally. After the above process is completed, you need to dry it for another hour, and you can pick up the car.

Precautions. After crystal plating, you can't get wet in the rain for three days, and you can't wash the car for seven days.

It takes about half a year to visit the store for maintenance.

To do a good job of "crystal plating" requires the following steps: car washing, polishing, degreasing, and crystal plating. Polishing is done to remove scratches and oxide layers; Degreasing is to remove the residual wax grease left on the surface of the car during polishing; If the car surface is not degreased, there will be wax grease residue on the surface of the car paint, and the direct crystal plating will cause the crystal plating layer to fall off with the cleaning of the car, so degreasing is a necessary step for crystal plating.

Many car beauty shop masters deliberately reduce the steps in order to save time and effort. In fact, it looked good at the time, and after a few car washes, it will show its feet! Imagine plating crystals on a layer of slippery grease, how long can the best "crystal plating products" be kept on it?

Degreasing is to remove the residual wax and grease on the car paint after polishing, just like "removing makeup" for the car and turning it into "no makeup", and then apply a layer of transparent stepless crystal film to isolate the car paint from the air and carefully care for the car paint underneath.