I m a rookie, and I want to paint my car, so I want to give some advice

First of all, when you spend a lot of money on a brand new car, do you want to keep your car clean, beautiful and free of scars forever? "Coating" is a car paint maintenance replacement product manufactured with new environmentally friendly raw materials and new car paint maintenance concepts after summarizing the advantages and disadvantages of waxing and sealing glaze.

Compared with other car beauty products, it has the following characteristics:

1. Keep it for a long time. The general coating products can be maintained for about one year, and if Amika's coating products are selected, they can be maintained for 3-7 years.

2. Low cost. Although the single coating product is higher, from the perspective of average daily cost, the coating product is the lowest among the car beauty products such as waxing and sealing glaze. With the use of coated products, daily maintenance such as car washing will be reduced, which not only saves time, but also reduces maintenance costs.

3. High hardness and strong protection of car paint. Coating products are a layer of high-hardness film attached to the car paint, which can effectively protect the car paint.

4. The damage to the car paint is the lowest. "Glaze" and "wax" are fully combined with the lacquer surface, so the adhesion method is to use a high-speed grinder to pressurize and seal the agent into the lacquer surface (so it is called sealing glaze). At the same time, this pressure acts on the paint surface, which often causes damage to the paint surface.

The coating adopts a gentle application and wiping adhesion method: the molecular adhesion of the film itself adheres to the paint surface. Avoid damaging the paintwork.

Waxing and sealing glaze are very easy to cause damage to the car paint, while the coating product will not only not cause damage to the car paint, but also effectively protect the car paint. Amica's car paint coating products are inorganic vitreous coatings, because our products are specially formulated with a special coating process that allows you to work without damaging your car paint and protect every aspect of your car paint.

5. Save time. With the coating product, it is possible to extend the weekly car wash to once a month. It can save a lot of time.

6. Value preservation. After the use of coated products, the paint surface of the car will be as bright as new after a few years of use, and the evaluation of the car** will also be improved.

7. The appearance is beautiful and the paint is updated. Because after coating, it is equivalent to attaching a colorless transparent glass film to the outside of the paint, which makes the paint look brighter.

It's best to go to a professional store to do it, and don't spend money to make a big face for the car.

(1) Waterproofing. Cars are often exposed to the air, inevitably exposed to wind and rain, when water droplets remain on the surface of the body, resulting in dark spots on the paint, which greatly affects the quality and service life of the paint. In addition, water droplets tend to rust the exposed metal surface.

2) Anti-corrosion and oxidation. The painted surface has the effect of preventing acid rain, acid adhesion, and corrosive gases.

3) High temperature resistance. The principle of anti-high temperature of the coating is to effectively reflect the incident light from different directions, and prevent the incident light from aging and discoloring the topcoat or primer.

4) Anti-static effect. The anti-static effect of the coating is mainly reflected in the static prevention of the car surface, and its principle of action is to isolate the friction between dust and the metal of the car surface.

5) Anti-ultraviolet effect. In daylight, due to the characteristics of ultraviolet rays, ultraviolet light is easier to refract into the paint, and the coating process fully considers the characteristics of ultraviolet rays, so that its damage to the car surface can be minimized.

6) Glazing. Varnishing is the most basic function of coating, after the coating of the vehicle, can improve the brightness of its surface, so that the paint surface to restore the bright natural color, the paint luster will be maintained for a long time.

7) Economic maintenance effect. After a professional coating maintenance, the above effect can be maintained for several years without other maintenance such as waxing, and the maintenance cost can be saved to the greatest extent while maintaining the best effect. And unlike uranium sealing, the coating is only attached to the paint surface and not combined with the paint surface.

The coating will not cause damage to the paint, but will better protect the paint.

According to the authoritative definition of CAR2100, automotive coating film refers to the use of spray guns on the basis of the traditional polishing process, the color restoration magic wax is refined to the particle size, and evenly sprayed, and then polished with non-woven fabric to form a protective film on the paint surface of the car. This layer of film can provide efficient protection for the paint surface in all aspects, and can also make the old car completely refurbished, with the effect of color renovation, paint brightening, and sealing.

1. The first step is to wash the car and wash off all the dust and stolen goods that can be seen on the car.

2. It is difficult to find with the naked eye when cleaning with car wash mud, and it is difficult to remove the stubborn iron powder attached to the surface of the car paint with car wash essence or rust remover.

3. Use tape to stick all the places that come into contact with the paint surface, mainly to prevent damage to it caused by the subsequent grinding and polishing.

Fourth, then apply brightening agent and grinding and polishing.

Fifth, the next step is to get to the point, the original agent for car coating, don't look at its small bottle, it is all up to you to protect your car.

Sixth, the staff carefully coat the whole car.

7. In order to make the coating agent and the paint better integrated, it needs to stand for about 40 minutes after the whole car is coated.

8. After the rest is over, the final procedure of grinding and polishing begins. In order to better integrate the coating agent and the baking paint, it is also necessary to polish off some of the physical coating ingredients remaining on the surface.

9. After grinding and polishing, the automotive paint coating is completed.

1. Regarding the problem of coating damage paint, the construction method of coating is qualitatively different from waxing and sealing glaze, which itself does not hurt the paint, but the polishing in the coating process will cause damage to the paint surface

A. If it is an old car, there will be a lot of scratches on the paint surface, then it needs to be polished, which is a treatment of your paint surface under the premise that your paint itself has been damaged.

There are 2 ways, the first is to re-paint, the second is to polish, if the polishing can be disposed of, then why re-paint. Except, of course, if you don't mind scratches on the paint.

b. If it is a new car, this polishing process is very simple, in fact, it is to use the softest sponge polishing disc, plus the finest polishing agent to process, this polishing agent can play a role in repairing and filling, so that the operation is similar to the damage caused by you wiping the car several times with a towel.

1. Inspection and maintenance tips for the aging and scars of the body: no matter what kind of car there will be large or small scars. How much damage does the scar cause to the paint?

How can I patch it?The correct method of disposal must be considered. If it's a scar that isn't very noticeable, it's better to leave it alone.

2. Repair and maintenance tips for wear and tear scars: All cars have abrasions, and the best way to repair them is to fill the scars with the same coating agent as the body. The coating agent can be applied once, twice, and three times, and the more times it is used, the cleaner it will be applied. But even handling of the entire body is also important.

You can go to the car coating plus beautiful car will go and see!

Yes, because I am not professional enough, I am not doing very well.

If you know this craft, no problem, or if you don't paint the car, it's not worth it.

Hello, the new car is to do automotive coating.

Pretty cars will tell you what is a real car coating!

There are many brands of automotive coating products in the market, many people use mirror wax, polishing glaze and other substances to deceive customers, and at the same time do not pay attention to the surrounding construction environment during construction, resulting in many consumers being deceived and losing confidence in coating products. To this end, here is a general introduction to some product classifications and characteristics in the automotive coating market, and how to choose a regular car beauty shop.

The coating is mainly divided into professional grade coating and DIY grade coating products.

The main products of DIY grade are resin coating, fluorine coating and glass cellulose coating.

One. The main product characteristics of resin coating are as follows:

1.The duration is short, generally 3-6 months, and after expiration, it must be re-polished and re-coated;

2.The hardness of the film layer is low, due to the low hardness of resin products, the hardness of the paint cannot be effectively enhanced, so the anti-scratch operation is basically equal to zero;

3.The light transmittance and refractive properties of the film layer are poor, and the resin itself is a viscous lipid substance, and the light transmittance and gloss refraction are relatively poor.

4.The resin coating is not resistant to dirt, and the paint surface is very easy to stain and stick;

At present, this kind of product is more used on the market, and the coating product of 3M ** is guaranteed for about 1 year at 800-1200. U.S. Eagle's Eagle Speed series and so on.

Two. Fluorine coating has been used very little recently, and fluorine products are mainly used in glass coating because they do not stick to water;

Three. The main component of glass cellulose coating is also resin, but it contains a small amount of glass cellulose.

Automobile coating will play a better role in protecting the car, and the following procedures are available for reference:

First, the paint front treatment.

The car body should be thoroughly cleaned before coating. Clean the body thoroughly, and use air blowing and dry cloth to wipe off the moisture remaining in each gap to avoid small water droplets and small particles of dust affecting the coating effect during construction.

Oxide layers, iron powders, oil stains, etc. are removed, and the complete paint surface is presented. In fact, not only coating, but also other care products need to be treated before painting.

Second, the selection of automotive coating products.

Positioned for your car is a professional-grade coating. Generally, it is a new car coating, and it is best to go to a car beauty shop to do a professional-grade coating; Old cars can consider DIY coating by themselves.

3. Coating details.

When the car is coated, it should be carried out separately, and the whole vehicle can not be constructed at the same time, and the car paint should be evenly wiped first, and then the next part of the coating should be done. Because the coating layer is easy to cure quickly during application, it needs to be completed in a short time.

4. Precautions.

Pay attention to the polishing process, because improper polishing is easy to cause irreversible paint damage, which is why so many riders are reluctant to polish easily. It is best not to wash the vehicle within 7 days after the car coating to achieve the best bright effect of the coating.

Car coating is best done in a professional car detailing shop.

If you don't want to spend too much money, you can go to the car supplies store to buy a set of coating products to do it yourself, the coating has a relatively simple construction product, 100-200 yuan a set, you can do it yourself, I don't know how to consult me.

It is best to ask a professional coater to operate.

Automotive paint coating is a method of protecting the automotive paint surface, which generally requires a coating on the surface of the vehicle paint. Here are some of the benefits of lacquer coatings:

1.Protect the car paint: The paint coating can effectively protect the car paint from ultraviolet rays, sunlight, acid rain, oxidation, pollutants, etc., thereby prolonging the service life of the car paint.

2.Maintain paint brightness: Coating can increase the gloss and saturation of the paint surface, making the car more beautiful.

3.Simplified cleaning: The coating makes it difficult for dirt to adhere to the paint surface, making it easier to clean and reducing the number and time required for car washing.

4.Anti-scratch: The paint coating can form a protective film on the surface of the paint surface, making the paint more scratch-resistant and scratch-resistant.

5.Increase the value of used cars: The appearance of the vehicle is an important factor affecting the used car**, and the paint coating can make the vehicle look more novel and beautiful, and it also refers to the resale value of the second-hand car.

In short, paint coating can effectively protect the paint surface of the car from damage, making the vehicle more beautiful and preserving its value. However, it is important to note that for optimal results, it is important to choose a paint coating product of reliable quality and have it carried out by a professional service person.

<> "Automotive Coatings. First, the coating introduction buried oak.

When light enters different transmitting substances (e.g., air into glass), about 5% of it is reflected, and there are many lenses and refractors bent in the optical sight, which can add up to 30% to 40% of the incident light loss. Modern optical lenses are usually coated with a single or multi-layer anti-reflection coating of magnesium fluoride, a single-layer anti-reflection coating can reduce the reflection to, and a multi-layer anti-reflection coating can reduce the reflection to, so if the whole scope is properly coated, the light transmission rate can reach 95%. Lenses coated with a single layer of anti-reflection coating are usually blue-purple or red, while lenses coated with multiple layers of anti-reflection coating are pale green or dark purple.

Second, the principle of coating.

The main purpose of coating is to reduce reflections. In order to improve the light transmittance of the lens and the quality of the image, the lens is coated in the modern lens manufacturing process. The coating of the lens is based on the principle of optical interference, and a layer of material (usually fluoride) with a thickness of one-quarter wavelength is coated on the surface of the lens, so that the reflection of the color light of this wavelength by the lens ruler is minimized.

Obviously, one film only works on one color, while a multi-layer coating can work on a variety of colors. Multilayer coatings are usually repeated with different materials and layers of different thicknesses on the surface of the lens. For example, the reflectance of each surface of an uncoated lens is 5%, which is reduced to 2% after a single coating, and 0 2% after a multi-layer coating, which greatly reduces the diffuse reflection between the lenses of the lens, thereby improving the contrast and sharpness of the image.

3. Precautions for coating.

The temperature of the coated body can not be too high (more than 30 °), the construction is carried out in the professional construction workshop, the room should be sealed when there is wind and sand, the vehicle can not be exposed to the sun after the coating construction is completed, to prevent the chemical layer from melting, the chemical layer should be thin and uniform, and pay attention to the work clothes, the cuffs should not rub the chemical layer, it is strictly forbidden to board the door frame on the drug, it is strictly forbidden to close the body next to the body, exterior decorations, glass, rubber parts stained with the agent when erased in time, some car sunroof seals are made of textile materials, It should be covered with masking paper in advance to avoid being stained with chemicals. Do not wash the car for 7 days after coating.