What instrument is used for the inter turn withstand voltage test of the low voltage motor, and what

Now the types and principles of inter-turn hipot testers are common on the market.

The main thing is that the voltage level is not the same!

Key features: ED2605 turn-to-turn insulation impulse withstand voltage tester is suitable for testing the turn-to-turn insulation performance of coils or windings.

It conforms to the standard JB T9615-2000 "Test Method for Interturn Insulation of Scattered Embedded Windings of AC Low-voltage Motors".

The pulse waveform comparison method is adopted: the impulse voltage wave with the specified peak and wavefront time is directly applied to the winding of the test product and the reference winding of the same design at the same time, and whether the difference in the attenuation vibration waveform caused by the impulse voltage in the two is used to detect whether the insulation between the turns of the motor winding is good.

Peak voltage: 0 5000V adjustable, tolerance of 5%.

Technical parameters. Color LCD display (320 240).

The thyristor module is used as a high-voltage controllable switching device to improve the stability and reliability of the product.

Pulse peak voltage: 100V 3000V can be set arbitrarily.

Pulse Peak Voltage Accuracy: 5%;

Pulse repetition cycle:

Sampling Frequency: Graded change.

Standard waveforms can be stored in the instrument.

Resolution: 1 turn short circuit can be resolved.

It is suitable for testing coil components such as motors, stators, rotors, transformers, and inductors with different parameters.

Using three output terminals, the manual automatic switching output three-phase pulse, high-voltage fully programmable test, with main phase, secondary phase, main and secondary phase coil automatic continuous test function.

Twenty-five, the red dust is flashy and flashy.

The main features of the inter-turn hipot tester.

It is suitable for testing the turn-to-turn insulation performance of coils or windings.

It conforms to the standard JB T9615-2000 "Test Method for Interturn Insulation of Scattered Embedded Windings of AC Low-voltage Motors".

The pulse waveform comparison method is adopted: the impulse voltage wave with the specified peak and wavefront time is directly applied to the winding of the test product and the reference winding of the same design at the same time, and whether the difference in the attenuation vibration waveform caused by the impulse voltage in the two is used to detect whether the insulation between the turns of the motor winding is good.

Peak voltage: 0 5000V adjustable, tolerance of 5%.

The power frequency withstand voltage tester is an intelligent withstand voltage test equipment with advanced performance designed according to the latest national power industry standards, which is safe and reliable, powerful, easy to use and simple to maintain. It is used to carry out dielectric strength tests under specified voltages for various electrical products, electrical components, insulating materials, etc., in order to assess the insulation level of products, find the insulation defects of the tested products, and measure the ability of overvoltage.

Power Frequency Hipot Tester Product Introduction:

Power frequency hipot tester implementation standard: DL

It is widely used in electrical manufacturing departments, power operation departments, scientific research units and colleges and universities. Portable AC and DC withstand voltage tester is suitable for the field!