How to print the electronic line number machine, and how to use the line number machine coding machi

Prepare before printing].

1) Turn on the power supply to the electronic wire number machine, press the on/off key, and turn it on.

2) Ribbon Installation:

Step 1: Roll the ribbon in the direction of the arrow on the ribbon box so that the ribbon is flattened

Step 2: Put the print head in a non-printing state;

Schematic diagram of the installation of the ribbon cartridge.

3) Casing installation:

Step 1: Place the casing adjuster face up, i.e., the side with the word "Shuofang" labeled face up.

Step 2: Thread the cannula through the casing adjuster from right to left.

Step 3: Pull the casing out 2-3cm, install it in accordance with the position of the wire number machine, and you will hear a "click" sound when it is installed in place.

Step 4: Place the tip end of the sleeve in the position of the print head and close the cap.

Button Setting]1: After installing the casing and casing adjuster, select the casing, press [Enter], enter the casing specification selection interface, and the screen will display two lines of content, the first row "Please select the casing diameter", the second row ";

3: Enter letters, Chinese characters or symbols, such as: enter s, u, p, v, a, n in order, then the screen displays: 1: supvan;

5: Then enter "Shuo Fang" to be: 2: Shuo Fang;

6: Press [Print], Shuofang Line Machine TP70 76 will automatically print out the entered content, and automatically half cut and full cut;During the printing process, the LCD will show that it is printing.;After printing, it will automatically return to the document input interface.

Supplement: square, square, square, square casing please select, can print number;

Square, square casing please choose, can print the number;

Please select the square sleeve and print the number.

The printing methods of various brands of electronic wire number machines are similar, for example: Synred T800, T900, C-180E, C-180T line number machine printing casing stand-alone operation method: , prepare a wire number machine, ribbon, casing, casing bracket;First, tighten the ribbon in the direction of the arrow around the hole on the left side of the ribbon, install the ribbon on the machine, let the two holes of the ribbon be set on the two blue pillars on the machine, and lay the ribbon flat, the casing is placed on the casing support, the head of the casing is placed in the machine, the head should exceed the half-cut knife, the casing passes the casing adjustment knob, the casing is flattened, the blue knob on the right side is tightened, the tube is S-shaped, and the Sine Reed line number machine does not need a casing adjuster (see figure);The line number machine is turned on, select the casing specification, please select the casing pipe for the casing below 2 squares, please select the casing for the casing above 4 square meters, please select the casing pipe 6 for the casing between 2-4, and select the casing 4 for the casing between 2-4, press enter, and set the attributes such as section length, font size, number of repetitions, half-cutting, character scaling, etc.; , enter the content to be printed, press enter after entering a piece of content, continue to enter a piece of content, press enter again until all the content is entered, press the file key, save the file in case of loss; If there is a setting that needs to be modified, press the cancel key to pause, then press any key to return, press the up arrow all the time, move the cursor to the first line, reset the paragraph length, font size and other information, and press the file key again to save; When the ribbon is exhausted and the new ribbon is replaced, the machine will automatically prompt the breakpoint printing (whether to continue printing); T800, T900 line number machine when the casing is about to run out, press the cancel button to pause, after replacing the new casing, only press the print button, the display screen prompts printing or breakpoint printing, select breakpoint printing, press enter, the machine will continue to print the content that has not been finished just now.

A wire number printer is a device used to print words and numbers on a variety of products. They are often used in the packaging industry to identify and distinguish different products. The use of the wire number machine coder is relatively simple, it only requires connecting the device to a power source and loading the appropriate ink or ink.

Once the preparation is complete, the information to be printed is entered into the control panel of the printer. This information can be a product name, number, date, or other identifier. Once the information has been entered, the coder is ready to work.

Place the product on the conveyor belt under the coder and press the print button. The coder quickly prints the required information and pushes the product off the conveyor belt so that the next product can be printed.

Wire number printers typically have high-speed printing capabilities and high reliability. They can handle large quantities of products in a short period of time and ensure that each product is clearly and accurately marked. This makes them an important tool in the packaging and logistics industry.

In addition, wire number printers usually have adjustable print positions and font sizes. This makes them suitable for a wide range of products of different sizes and shapes, from small bottles to large boxes. Many printers also have an automatic cleaning feature to ensure that the equipment is always in top condition.

Although the use of the old coding machine is very simple, it needs to be properly trained and guided before use. This will ensure that the operator understands how the equipment works and knows how to take appropriate action if something goes wrong with the equipment. In addition, the use of the coder also needs to comply with relevant safety and environmental standards to ensure the safety and longevity of the equipment.

In conclusion, the wire number printer is an efficient, reliable and suitable equipment for a wide range of products. They are very useful in the packaging and logistics industry to quickly and accurately identify and distinguish between different products. With proper training and safety instruction, operators can safely use the coder and ensure that the equipment is always in top condition.

The use of the line number machine coding machine is as follows: 1. Install the ribbon and the number pipe cavity such as (sticker).

Attach the ribbon and number tube (sticker) to the line printer.

2. Install the casing and casing adjuster.

Install the number tube to the casing naughty restitter.

3. Cover the shell of the online number machine.

Due to the fact that the line number machine will be run with a cutter when it is running, in order to be safe, the safety shell needs to be covered, otherwise the line number machine will not work.

4. Plug in and turn on.

Connect the line number machine to the power supply and turn on the power switch of the boat.

5. Material setting.

Set up the roller according to the material to be printed.

6. Print the content, and the content that needs to be printed.

7. Officially print, and complete the printing of the number tube.

Hello, if the electronic line number machine in your hand is Shuofang, then, the electronic line number machine sticker printing position is up, you can adjust it to the normal position through the "print position adjustment" function under the "arrangement" key, the specific steps are as follows:

Press the "Arrange" key and the screen appears:

The line number machine is displayed on the screen.

Through the lower arrow key, check the "Printing Position Adjustment", and after the He Yin Wang enter] key is confirmed, the screen is as follows:

The screen of the line number machine shows the sign.

After pressing [ ], the screen display content moves down one line, showing "Sticker Left and Right Printing Positions", through the down arrow key, select "Sticker Printing Positions Up and Down", press [Enter] after selection, the screen displays:

The line number is displayed on the screen of the Zen machine.

After selecting, press [ Enter], and the screen displays:

The line number machine is displayed on the screen.

When the upper and lower print positions of the sticker are on top, press [ ] to adjust, and each value represents. For example, if you want to move down, the screen is now displayed as <04>, press [ ] until the screen is displayed as <05>, and press [ Enter] to return to the document input interface.

"2" Shuo square line number machine driver installation method:

4.The system will automatically install, and finally "Operation Successful" pops up, click the "Finish" button to end the installation.

2.The "Please select the installation folder" window appears on the screen, confirm the installation path and click "Next";

3.The computer screen is ready for installation, select "Next"; The software starts installing. During the installation process, it will appear "It did not pass the Windows logo test, it cannot be verified that it is the same as Windows 7."

compatibility", click "Still continue".

4.Finish, the computer screen will show "Installation Completed", press "Finish" to complete the software installation.

1: Create an Excel file and save it to your computer.

3: Select the data excel file in the computer, click "Open", 4: As shown in the figure below, the batch label data will be automatically generated.

5: Click the "Print" icon.

Although the brand and grade of the line number machine on the market are different, the basic operation methods are similar, which is nothing more than two operation methods, 1: stand-alone printing; 2: Online printing.

Shuofang line number machine is the brand line number machine with the largest number of shares in the market, and the following is a detailed introduction to Shuofang line number machine as an example:

1. Stand-alone printing method:

1. After receiving the line number machine, please put the machine in a flat place.

2. Open the upper cover of the wire number machine and tear off the tape on the half-cutting knife so as not to affect the normal cutting of the half-cutting knife.

3. If it is a printed sticker, please pull out the sticker so that the sticker is 2cm lower than the position of the half-cutter;

Turn left|Turn right.

4. If it is a printing sleeve, please take out the sticker and pass the sleeve through the sleeve adjuster. After installing the adjuster, make the casing beyond the position of the half-cutter.

5. After installing the sleeve, put the ribbon box into it, and rotate the knob on the right side of the ribbon box to 12 o'clock.

At this point, the ribbon and sleeve or sticker have been installed, and the corresponding materials and input text can be printed on the machine.

There are many brands of line number machines, and the more common brands on the market now are: Shuofang, Canon, Biaoying, Limake, MAX, and Sainred.

Generally speaking, the use of the line number machine is relatively simple, directly according to the manual to operate it, if there is a problem can not be solved, you must consult professional personnel. Guangzhou Dianchuang.