Apple 7 wireless can t be opened? The Apple 7 wireless network button won t open

If the wifi switch of your iPhone phone cannot be turned on, it is recommended to try the following methods:

1., shut down, restart the phone;

3.、Settings -- General -- Restore -- Erase all settings and settings (this operation, the phone will restore factory settings and delete all data, so before operation, you need to back up your data first);

4., connect to the computer iTunes, restore the iPhone;

5.If it still doesn't work, it is recommended to go to the iPhone official website repair location for repair.

If you need to inquire about the official repair location of the iPhone near you, you can check it through the official website of the iPhone, and the specific query method is as follows:

1. Enter Apple's official website and click "Service and Maintenance Information" in "Service and Maintenance" at the bottom;

2. Select the product to be repaired (such as: iPhone, Mac, iPad, etc.) after entering;

4. After entering, click "Service", enter the city, select the product you want to repair, click Go, you can display all the official after-sales locations in the city that can repair iPhone devices, and find the nearest one.

Solutions to the wifi switch of the Apple mobile phone that cannot be turned on: 1. Turn off the power and turn it back on; 2. Make sure you have the latest version.

ios。Go to Settings > General > Software Update to check or upgrade to the latest version; 3. You can enter the phone's [Settings] - [General] - [Restore] - [Reset Network Settings] (

This will restore all network settings, including Wi-Fi passwords, VPNs, and APNs

Settings, please make sure that the phone is unlocked and not jailbroken and can be turned on and off normally); 4. Back up all your data, go to Settings > General > Restore, tap Erase All Content and Settings to reactivate.

iOS devices. Get more help: 1. Contact Apple technical support 400-666-8800 (charged); 2. Visit Apple Store and authorized after-sales service.

1. The first step is to open the settings of the iphone7 interface.

2. The second step is to select "Wireless LAN" and click to select.

3. The third step, then reconnect and disconnect the wifi signal, so that the iphone7 phone will re-identify the network once, and the original wrong network connection can be emptied.

4. The fourth step is to know the Zhaodong, and turn on the iphone7 mobile phone in turn [restore the network guess segment settings.

Reset iPhone7 network system settings.

Extended Dry Data:You can also change other network connections, it is possible that there is a problem with the current network settings, it is recommended to turn on the current wireless router.

's computer resets the network wifi, or reboots the router.

If your Apple VII Wi-Fi won't turn on, you can try the following methods to fix the problem:

1.Check your Wi-Fi connection: Make sure your device is properly connected to the Wi-Fi network. Open Settings, go to Wi-Fi options, confirm that the correct network has been selected and enter the password if required.

2.Restart your device: Sometimes when something goes wrong with your device, restarting it can fix some common network issues. Try turning off your device, wait for a few seconds, and then turn it back on.

3.Toggle the Wi-Fi switch: In your device's control center or settings, turn off the Wi-Fi switch, wait a few seconds, and then turn it back on. This will try to re-establish the connection.

4.Forgot Wi-Fi network: If restarting your device or toggling the Wi-Fi switch doesn't fix the problem, you can try forgetting and reconnecting to the Wi-Fi network.

Find your network in your Wi-Fi settings, select Forget this network, then re-enter your password and reconnect.

5.Update your software: Make sure your device has the latest operating system version installed. Updates may address known issues and bugs.

6.Modify network settings: Sometimes, modifying some network settings can solve the problem. Here are a few things you can try:

Move the location of the wireless router access point closer to the device to ensure that the signal strength is good enough.

Try modifying your router's band or channel settings.

Make sure your router supports the Wi-Fi protocol that the device is using.

If there are other devices connected to the same network and they have the same problem, it could be an issue with the router or network provider. You can try contacting them for further support.

7.Reset network settings: If none of the above methods solve the problem, you can try resetting your device's network settings.

In Settings, select General, then select Reset, and then select it"Reset your network settings"。Note that this will remove your Wi-Fi password and other network settings, and you will need to re-enter them.

If none of the above fixes the problem, you may need to contact Apple Support or go to the nearest Apple Authorized Repair Center for help. <>

Summary. Apple 7 can be connected to wireless, but can not go to the Internet, the reasons for connecting to wifi but not being able to access the Internet are: 1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

2. Router problems, the router may be overheated or damaged. 3. Broadband arrears may lead to inability to access the Internet. 4. The wifi name contains Chinese, which causes some computers to be unable to connect to the Internet.

5. Computer system problems, there may be problems with the system, resulting in connecting to wifi but unable to access the Internet. Suggested solutions: 1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and eliminate the problem of wifi itself.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet. 3. Contact broadband customer service to confirm whether there is any abnormality in the broadband, such as arrears, recharge the broadband, and then dial up the connection. 4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

5. If the above reasons are ruled out, it is likely to be a computer system problem for a long time, and it is recommended to restore the factory settings. See if that solves the problem. I hope it can help you and wish you a happy life

The Apple 7 can be connected to Wi-Fi, but it can't access the Internet.

Apple 7 can be connected to wireless, but can not go to the Internet, the reasons for connecting to wifi but not being able to access the Internet are: 1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet. 2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet. 4. The wifi name contains Chinese, which causes some computers to be unable to connect to the Internet. 5. Computer system problems, there may be problems with the system, resulting in connecting to wifi but unable to access the Internet.

Suggested solutions: 1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and eliminate the problem of wifi itself. 2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband, such as arrears, recharge the broadband, and then dial up the connection. 4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting. 5. If the above reasons are ruled out, it is likely to be a computer system problem for a long time, and it is recommended to restore the factory settings.

Other phones can access the Internet, wireless is no problem, and the phone has also been restored to factory settings.

Other mobile phones can access the Internet, wireless is no problem, the phone has also been restored to factory settings, dear dear, please follow the above description to operate!

Summary. 1. The SIM card of the mobile phone is in poor contact with the shneme of the mobile phone card slot, resulting in the failure of the SIM card circuit and the inability of the mobile phone to communicate with the network base station.

2. The mobile phone is incompatible with the system due to the application software for installation, resulting in the system software closing the modem in the mobile phone signal processing circuit, at this time you can turn off the mobile phone and then restart, the modem in the mobile phone signal circuit will be restarted, and after the signal is normal, delete the suspicious mobile phone application software installed before the problem.

3. The SIM card of the mobile phone is not registered in the network, at this time, you can insert this SIM card into another mobile phone, if it also shows no service as the reason for the SIM card.

4. If the SIM card of the mobile phone is accidental, and there is no signal in the network signal coverage area, it fails to reconnect to search the network and merge the book, at this time, you can manually search for network registration under the menu of Settings - General - Network - Network Operator.

5. If the signal coverage of the mobile phone SIM card network operator is not available, you can change the location to an open area, and then check the mobile phone signal grid display, if the display is normal after changing the location, you can call the network operator service ** for feedback and complaints.

Apple 7plus wireless network turned on without network.

1. The SIM card of the mobile phone is in poor contact with the shneme of the mobile phone card slot, resulting in the failure of the SIM card circuit and the inability of the mobile phone to communicate with the network base station. 2. The mobile phone is incompatible with the system due to the application software for installation, resulting in the system software closing the modem in the mobile phone signal processing circuit, at this time you can turn off the mobile phone and then restart, the modem in the mobile phone signal circuit will be restarted, and after the signal is normal, delete the suspicious mobile phone application software installed before the problem. 3. The SIM card of the mobile phone is not registered in the network, at this time, you can insert this SIM card into another mobile phone, if it also shows no service as the reason for the SIM card.

4. If the SIM card of the mobile phone is accidental, and there is no signal in the network signal coverage area, it fails to reconnect to search the network and merge the book, at this time, you can manually search for network registration under the menu of Settings - General - Network - Network Operator. 5. If the signal coverage of the mobile phone SIM card network operator is not available, you can change the location to an open area, and then check the mobile phone signal grid display, if the display is normal after changing the location, you can call the network operator service ** for feedback and complaints.

6. **The card has been used for too long, and with a valid certificate, you can go to the local business hall to reapply for a card.

Restart the phone to try, generally speaking, it is a minor problem, and it will be fine to restart.

Restart your phone to see if it works.