-
Reasons for computer restart and solutions:
1. There may be a problem with the BIOS settings, enter the BIOS to restore the default settings or take out the motherboard's battery, and wait for 5 minutes to install it. Purpose: To restore the default values of the BIOS settings and eliminate the automatic reboot or shutdown of the BIOS cooling presets.
2. If the restart occurs before the application software or the program software is running, it may be the restart caused by the program software, and the program software is generally uninstalled and reinstalled.
3. Use anti-virus software to check and kill viruses in safe mode, if you restart troubleshooting, it is a restart failure caused by viruses.
4. Press F8 to enter the safe mode after booting, and then exit and enter the normal mode. You can also use the system restore function that comes with the system, and if you reboot troubleshooting, it is a reboot caused by damaged system files.
5. If the fault is still there, then check the power supply, the power supply quality is poor, aging or the power is too small, can not meet the power supply needs of the computer accessories, you can replace the high-power and high-quality power supply, if the troubleshooting, it is the restart fault caused by the power supply.
6. If the computer restarts when hot-swapping a device, you can solve it according to item 3.
7. Then use the elimination method to check the memory, graphics card, CPU, CPU fan, motherboard, etc.
8. Check the memory, the memory quality is not up to standard, poor heat dissipation, overclocking, mixing of different brands of memory and the CAS value setting is too low, etc., which can cause the computer to restart, and the replacement method can be used.
-
The automatic restart of the computer is usually caused by the following reasons: (You can use 360 Security Guard to try the system recovery first).
1. The computer will automatically restart due to CPU failure. Check whether the fan of the CPU is working properly, whether the contact between the thermal conductive sheet and the CPU is tight, and it is best to coat it with thermally conductive silicone. Because if the CPU heat dissipation of the computer is not good, it will cause the temperature to be too high and cause automatic restart.
2. The computer will automatically restart due to memory failure. Whether it is caused by the incompatibility of two memories. You can unplug one and try to boot it first, (note that you must turn off the power of the host and unplug it, otherwise the memory or motherboard will be easy to "burn" off!) )
3. The computer will automatically restart due to the wrong BIOS setting. From the BIOS, you can set the hard disk overheating auto shutdown and CPU overheating auto shutdown. You can take a look.
4. Power failure. If the power supply is damaged, you have to repair the power supply or directly change the power supply, and if the voltage is unstable, you can find a voltage regulator to solve the problem.
It really doesn't work, you reinstall the system and try again.
You can judge what is wrong with your computer according to your actual situation, but if you are not familiar with the computer, it is recommended to ask a professional to deal with it.
Hope it works for you, hehe!
-
The fan is not good, the heat dissipation is not good, and when the CPU temperature is too high, it will restart.
-
The computer general Qing Jane is self-imposed to restart the Yuzhi pants What's going on.
People, to be honest, are always lonely.
I also felt quite lonely. >>>More
Reasons for slowing down internet speeds:
1.Rubbing the network: generally using wired Internet computers will not encounter this situation, but with the popularity of notebooks, more and more people take wireless as a way to network, but wireless has a big disadvantage is that it is easy to be rubbed against the network, once it is rubbed against the network, their network speed will naturally slow down, after all, the bandwidth is limited, others use more, and there is less for themselves. >>>More
UI calculates the total power consumption, while i2R calculates the heat generation, but they are equal in pure resistive circuits (i.e., only resistors or lamps and the like) and different in non-pure resistive circuits. For example, in a circuit with an electric motor, the total electrical power consumed during UI, and I2R is the power consumed by heat generation in the circuit, and according to the conservation of energy, UI-I2R is the remaining power converted into mechanical energy.
If the memory or graphics card is not plugged in properly, it should be no problem if you unplug it all over. >>>More
I have also been living with my boyfriend for 2 years.
But in terms of feelings, we have always been very good, like you said, most of the time it is very good, but it is inevitable that there will be times of quarrels, and I often feel very tired after the quarrel, in fact, many girls like their other partner is romantic, tolerant, and good to themselves. But people are selfish, and feelings are also a natural thing, and we just started a year, like most couples, eating together, watching movies, quarreling, and reconciling. >>>More