I want to make an XP system, but I have encountered a big problem.

Remove the CMOS battery and clear the BIOS boot password.

Install XP via disc.

The XP disk is a CD, and it can definitely be loaded.

05 years should be installed xp no problem,Buy a computer installation disc (now it's all VCD discs) fool operation,Press F2 when starting the computer,Or F12 or del key into BIOS to set up a disc to start,After entering the disc installation interface, directly click to install the system to C disk,One click to get it。

If the optical drive is easy to use, just make an XP ghsot installation disk, light start, and redo it is OK. If you know how to do it, you can upload a mirror image on the Internet and engrave it, and if you can't, you can go to the computer city to buy a CD.

Unmount the hard drive, copy the unscheduled system files to the first partition of the hard drive on another computer, and format it first.

Find a ghost version of the system disk of Rainforest Mufeng, you can clear the system login password first, and back up important data before ghosting

To be more detailed, as long as the hardware is fine, everything else is OK

You can use the 360 company XP special edition, after all, Microsoft has stopped the service, and it is too dangerous to use the original XP again.

You first remove the system of the D drive, and then install the system on the C drive.

Do you want to keep any information? If you don't want to. When I install a system. Deleted both C and D drives. Repartition again. Then load it on the C drive. If you want to keep the data, put the data on the non-C and D disks first, and then repeat the above method.

Install it directly,It's when you choose the drive,Just choose the C disk,This time it comes out is a dual XP system,If the other one doesn't use,Just remove the XP corresponding to the boot menu,If you want D disk space,Enter C XP,Delete the DP of the D disk。

According to your description, there are two possibilities that give you two solutions.

First, you mentioned that the built-in system often restarts from time to time, it may be caused by poor heat dissipation of the machine, this is the self-protection mechanism of the computer, in this case you can open the case to check the operation of each fan, clean up the dust in the case, if possible, you can install a case fan on the chassis to increase the air intake, the system may not be installed because of the hard disk, or the CPU is overheated, complete these and then install the system to try.

Second, brand computers generally have system protection, users are not allowed to install their own system, you can go online to check the protection and cracking methods of your computer brand, generally like Lenovo, Dell, HP, Sony have hard disk protection, you can also directly repartition the hard disk, pay attention to the hidden partition of the hard disk should also be removed, so that the protection of the hard disk is gone, these need to be carried out under PE, you can make a U disk boot PE format hard disk, partition, install the system.

Let's try a different memory module first. However, the most likely thing is that the hard disk has bad sectors. Let's install it step by step with the system installation CD. If it's a hard drive issue, the performance will be poor after installation. It is recommended to replace the hard drive.

Maybe the computer hard disk has bad sectors, you try to change the disk, or when partitioning, leave a piece in the front, such as 10g blank, do not use, the system is installed in the back partition.

It may be a problem with the hard disk, it is better to format it with the original system disk, repartition it, and then install the system.

There should be a problem with the hardware connection.

What recovery software is installed in the system, there is uninstall it first. Then format it with PE in its entirety, and it should be OK to install it again.

Memory!!!

It's definitely easy to change the memory.