The washing machine can not be dehydrated, what is the reason

What you said is too general, whether it is fully automatic or semi-automatic, different machines have different repair methods, then I can only explain them one by one.

Double-cylinder machine to see whether the timer is in poor contact, whether the door switch is in poor contact, the two are good and then check whether the capacitor is out of shape, breakdown, whether there is water stains at the motor, if there is a place to check whether there is water leakage, for example, the sealing ring is aging, if the leakage causes a short circuit in the motor, the sealing ring and the motor should be replaced together.

Automatic washing machine is more troublesome, first check whether the micro switch is in poor contact (that is, the door switch), whether the capacitor motor is out of capacity breakdown or the motor is short-circuited, but the possibility of the motor short circuit is not too large, the above has been ruled out and then check whether the clutch electromagnet is acting, whether the clutch is stuck, whether the water level switch is not reset, and finally check whether the computer board has signal output, otherwise replace.

The automatic drum machine is similar to the above automatic maintenance method, if there is an electronic module to check whether it is pregnant.

If you can't repair it yourself, it's best to find after-sales service, and some things are not all solved by yourself.

If you're a washing machine, a situation like yours should be a clutch problem.

Unplug it again.

It may be caused by belt wear, or the capacitor of the dehydrated motor is broken, and it can be replaced by a professional maintenance point.

This phenomenon can also occur when it is damp.

Something is stuck in the clutch.

1. The safety switch is faulty, mainly caused by the safety switch insert falling off or poor contact contact. 2. The reason why the washing machine is not stable or the clothes are offset to one side, the clothes are uneven, and the washing machine needs to be washed again after the washing machine perceives unevenly. 3. The reason why the upper cover is not covered properly will lead to poor contact.

Suggested Treatment:

1. If the safety switch insert falls off or the contact contact is poor, the signal received by the program controller is that the cover is open, so it cannot enter the dehydration state. At this time, you can open the control panel to check whether the door switch is well connected, if normal, the hole is measured with a multimeter, when the cover is closed, check whether the safety switch is on, if not, you can use a tool to adjust the reed arc or replace the safety switch.

2. If the washing machine is not placed smoothly or the clothes are offset to one side, the washing machine will enter the dehydration state as soon as it hits the safety switch, and it will still not be able to enter the dehydration state after the second automatic correction. At this point, the laundry can be placed evenly, and the washing machine can be placed on a flat ground with adjustable feet to be placed smoothly. It may be that the clothes are uneven, and the washing machine needs to re-enter the water and wash it again after sensing the unevenness.

In addition, see whether the foot of the washing machine is flat, and the bottom corner of the front can be adjusted to the height of the dry joint, which can ensure that the center of gravity of the inner cylinder is on the motor shaft and can be dehydrated normally.

3. The most likely situation is that the upper cover is not covered well, and the reason why the cover is not covered well may also be caused by the poor contact of the dry switch inside the cover, the key is to see whether the display screen shows E2.

Inability to dehydrate If the washing machine does not have other faults, if it runs during dehydration, there are several main reasons:

1. Too much foam or too much detergent: If too much detergent is put and there is a lot of foam, the washing machine will also be lead-free and dehydrated.

2. Too much slag on the clothes wheels: too many clothes are placed in the washing machine, which is easy to stop the washing machine, reduce the number of clothes placed, and if the clothes are entangled, they can be separated.

3. Too little clothes: When there are too few clothes in the washing machine, you can't enter the dehydration link, so put a few more clothes or towels together for dehydration. If the above reasons are ruled out, the washing machine still cannot operate normally, and it is recommended that you find a professional maintenance engineer to overhaul the machine in order to eliminate the fault as soon as possible.

1. If the safety switch insert is not in good contact, the program will not be able to enter the dehydration state. At this time, you can open the control board to check whether the dust vertical switch insert is good, if it is not conductive, you can use needle-nose pliers to adjust the arc of the reed or replace the safety switch.

2. The washing machine is not flat, it will also lead to no dehydration, for this problem is easier to solve, just turn off the power, and then put the clothes evenly, and place the washing machine on the flat ground, so that the washing machine can be dehydrated.

Washing machine shopping guide.

1. When buying a washing machine, it is necessary to consider the cleanliness and damage rate, if the washing machine has a high degree of cleanliness, the clothes will be cleaner, and the damage rate of the drum washing machine is relatively small.

2. The amount of water and electricity used by the washing machine should also be noted, it is best to choose a washing machine with first-class energy consumption, the more energy-saving the washing machine, the better.

3. The floor area of the washing machine should also be considered, the size of the floor area can be determined according to the area of the family, if the family area is larger, the size of the washing machine can be, as long as the size of the washing machine is enough for family use.

4. The capacity of the washing machine is also very important, when purchasing, we should understand the capacity of the washing machine, decide according to the amount of laundry each time, choose how much capacity of the washing machine, and then look at the **, the function and model are not the same, the ** of the washing machine is not the same, this should be selected according to the personal situation.

5. To buy a washing machine with 3C, the performance of the product that has passed the 3C certification will be better, and you can also observe the outer packaging to see whether it has passed the certification, and the quality of the certified washing machine will be better.

1. The lid of the washing machine is not properly covered.

When the lid of the washing machine is not covered, it will cause the situation of non-dehydration, just cover the lid of the washing machine, and do not open the lid of the washing machine during the dehydration process of the washing machine.

2. Too much clothing.

Too many clothesIn the process of washing, the washing machine will automatically adjust to a low speed to cause poor dehydration effect, reduce the number of clothes before washing clothes, and don't stuff too much at once.

3. The drainage system of the washing machine is blocked.

When the drainage system of the washing machine is blocked, the washing liquid in the washing machine cannot be discharged, and the washing machine cannot enter the dehydration program, so the foreign matter in the drain valve can be cleaned.

4. The water level switch is damaged.

When the water level switch is reset, the washing machine will enter the dehydration program normally, if the water level switch is damaged, the washing machine will not be dehydrated, and Wang Qing needs to contact the after-sales point for maintenance.

1. It is possible that the washing machine is in the drain state, and the washing machine is not running when it is dehydrated. You can wait until the drain is finished before dewatering.

2. It is possible that the belt is too loose, resulting in slippage and inability to dehydrate. The tightness of the belt can be adjusted by adjusting the fixing bolts of the motor, if it is too loose to adjust properly, it should be replaced with a new belt.

3. There may be a decrease in the capacitor capacity of the motor starting next to the imitation hall, if the motor is weak during washing or dehydration, it is mostly caused by the decrease in capacitance capacity, and a new capacitor with the same capacity should be replaced.

4. If the linkage switch is capped with the washing machine is displaced or the contact contact is poor, it will also lead to the phenomenon that the motor does not rotate during dehydration. You can find a maintenance master to overhaul it.

5. It may be because there is too much laundry in the laundry bucket. Each washing machine has a limited amount of laundry, and when there is too much laundry in the bucket, more than the washing machine can bear, it will stop spinning. You can remove part of the laundry and flatten the bucket of clothing, and dehydrate it several times.

This answer is applicable to most brands of refrigerator models such as Gree, Midea, and Haier.

How to maintain a washing machine?

1. Pay attention to the voltage of the house. The control center of the washing machine is the computer board, and the best working state of the computer board is when the rubber backup voltage is between 180V and 230V. When using the washing machine, it is required that the water pressure should not be too low, because the water pressure is too low, and the slow flow will affect the service life of the water inlet valve and the motor.

Users of high-rise residential buildings should try to avoid using washing machines during peak water consumption periods.

2. Place it in a reasonable location. Try not to leave the washing machine in a humid space. If the family has limited living conditions, it should only be placed in a humid area (such as a bathroom, shower), and it should also be well ventilated.

3. Check the clothes for items. When doing laundry, remove matches, coins, and other items from your pockets and zip your clothes to prevent damage to the laundry sink. Use hot water to wash laundry at a temperature of no more than 45 to prevent damage to the washing machine drum.

Do not put the laundry in the washing machine if it is stained with volatile solvents to prevent fire or gas explosion.

4. Clean up in time and keep it dry. After using the washing machine, clean the filament filter and the shell, open the door cover, let the water evaporate, and protect the drying of the washing machine. But don't use hard brushes, detergents, volatile solvents to clean the washing machine, and don't spray volatile chemicals such as pesticides to avoid damage to the washing machine.

1. You can try to open the back cover of the washing machine and move the pulley by hand, if there is no jamming, after the power is turned on, the motor has a buzzing sound and does not rotate, it is a short circuit or damage between turns of the motor, or the capacitor is not connected to the key and bends into the motor circuit. 2. When there are too many clothes in the washing machine, the washing machine will automatically adjust to a low speed state due to the imbalance of clothes, which will affect the dehydration effect. 3. When the drainage system of the washing machine is blocked, the washing machine cannot enter the state of dehydration.

4. The washing machine is running at high speed when it is dehydrated, and if the top cover of the washing machine is not covered, the washing machine cannot be dehydrated.

Suggested Treatment:

1. If the dehydration function of the washing machine is broken, the power should be cut off and restarted. If the motor still does not rotate or the speed is low, it is a motor failure and the motor should be repaired or replaced.

2. When there is too much clothes in the washing machine, you only need to pause the washing machine and adjust the position of the clothes to keep the clothes level.

3. When the drainage system of the washing machine is blocked, you only need to take off the drainage filter of the washing machine to clean it, and rinse the debris at the drainage outlet to solve the problem.

4. Check whether the top cover of the washing machine is covered, if the top cover of the washing machine is still not dehydrated when the cover is covered, then check whether the linkage switch on the lower cover is damaged, if it is damaged, only need to replace the linkage switch.