After the Haier washing machine is dehydrated, it starts to swing left and right, what is the matter

In general, the main reason for the running of the washing machine is that the object has a natural frequency, which is mainly related to the mass and speed, and when the rotation frequency is close to or the same as the natural frequency of the washing machine, resonance will occur. You can change the amount of laundry or adjust the speed. Haier washing machine has the function of intelligently adjusting the balance, under normal circumstances, this problem will not occur, it is also possible that your washing machine is not flat, you check the base again.

My Haier washing machine is also shaking badly. It's like dancing, and often jumps to the door. Said it was a problem with the motor, but it took 500 yuan to change it or the same shaking, it couldn't be used at all, and every time it was dehydrated, someone needed to sit on the washing machine and press it.

Haier The washing machine is really rubbish, and I still bought a high-end machine, which is a waste of money. I'll never buy Haier junk stuff again.

This should be a small fault, find Haier after-sales.

Generally, it is a simple dehydrator that will do so!

I'm going to find Haier for after-sales maintenance, I can't get it myself.

There will be many reasons for this, and you need to find a professional person to investigate.

First of all, you need to know the reason, is it not flat?

Let Haier after-sales come to the door to repair it.

Could you be in the wrong place?

No problem, it's good to find Haier after-sales.

Haier after-sales contact to check the reason for you.

I can only contact Haier after-sales service.

Haier after-sales contact here, let you take a good look.

This is a good dance, and it must be repaired.

It seems that we have to find Haier after-sales service again.

You have to ask Haier about this after-sales service.

I've been using the Haier washing machine for so long, and it's no problem at all.

The one at my house is also Haier's, which is very easy to use.

Oh my God, is there such a ruthless one, and it is still at the door.

Have you seen Haier's after-sales service? Find them.

Haier washing machine I use all the time.

How could it be, mine at all.

Come on, swing together, hahahaha.

Because there was a problem with the drain pipe of the washing machine. Misplaced drains and frozen drains due to cold weather and lead collapse can be causedDrum washing machineThe reason why it stops halfway through washing.

Front-loading washing machines are the washing machine styles that most families will choose, and washing machines, as a necessity of daily life, can cause a lot of trouble if something goes wrong. In real life, it may happen that the washing machine was working well before it, and suddenly it doesn't work. This may be due to a problem with the drain pipe of the washing machine, which prevents the washing machine stool from proceeding to the next step, and the washing machine automatically stops.

Precautions for the use of drum washing machines.

For deeply dirty clothes, you can choose a program to pre-wash for a while, then disconnect the power supply and soak for a period of time, turn on the power source and wash again, which can make the washing effect better. Because of the high foaming laundry detergent.

Too much foam (especially when washing at high temperature) greatly weakens the washing and rinsing effect, and the use of low-foam laundry detergent makes the washing work and makes the clothes cleaner.

Drum washing machines are all strong drainage, and pump drainage, so it can be wall drain or floor drainage. The width of the machine is 600 cm, the height is 850 cm, and the depth, the same number of kilograms, there are 300 cm to 500 cm, so you can pay attention to the choice when decorating.

The above content refers to Encyclopedia-**Common faults of washing machines.

Answer: The Haier drum washing machine stopped after a while: the washing machine suddenly stopped working during the working process, and the fault was generally caused by the fuse blowing, and the possible reasons for the failure due to the normal circuit were: 1. The power supply voltage is too low.

When the supply voltage is below the minimum limit, if the load does not change, the current of the motor and the electromagnet will increase, and the fuse will be blown out. 2. The power supply voltage is too high. If the power supply voltage is too high, the air gap magnetic flux of the motor will increase, and the current will increase rapidly, which will burn the windings or fuses of the motor.

3. The load piece is overloaded. In the abnormal use of the washing machine, such as the wave wheel or dehydration bucket is stuck, the transmission mechanism produces shaft failure, bearing damage, etc., so that the motor is overloaded or stalled for a long time, and the electromagnet cannot be completely engaged due to failure, which will cause the current to increase rapidly, thereby burning the motor winding or fuse. The specific cause of the overload of the load piece should be identified so that it can be ruled out.

Summary. Hello dear <>

Reasons and solutions for the Haier washing machine to stop when it turns around: 1. In order to perceive the weight of the clothes, the washing machine will perceive the difficulty of rotation through a small arc of rotation, and the signal fed back to the computer board by the large current of the motor is strong, and the water level required by the washing machine is set through the perceived weight of the clothes, and the washing machine will stop rotating after the perception is completed, and then start to enter the water. 2. The washing machine has started the soaking program, and the washing machine will generally turn a few times (to make the clothes soak) stop for a period of time when soaking, and then start to turn again, and then stop again, turn and stop.

When it comes to the washing program or the spinning program, there is no problem with the washing machine, which is normal.

The Haier washing machine will turn and stop for a while.

Hello dear <>

Reasons and solutions for Haier washing machine to stop when it turns: 1. In order to perceive the weight of the clothes, the washing machine will perceive the difficulty of rotation through the rotation of a small arc, and the signal fed back to the computer board by the large current of the motor is strong, and the water level required by the washing machine is set through the perceived amount of heavy leakage of clothes, and the washing machine will stop rotating after the perception is completed, and then start to enter the water. 2. The washing machine has started the soaking program, and the washing machine will generally turn a few times (to make the clothes soak) stop for a period of time when soaking, and then start to turn again, and then stop again, turn and stop.

When it comes to the washing program or the dehydration program, there will be no rotation and stopping, which is normal for the washing machine to be fine. Back sensitization leak.

3. A leak in the drain pipe of the washing machine will also cause the washing machine to stop when it turns around. Because the drain pipe is connected to the floor drain, you won't know how old it is when the water leaks when it is staring, and when the water level becomes low, the washing machine will stop and automatically replenish the water, and the water level will continue to run after the water level is set to the pure level, but it will not be affected in any way when dehydrating. 4. If the Haier washing machine stops after turning and does not rotate, it means that the main engine of the washing machine is broken and you need to find professional maintenance personnel for repair.

The reasons are as follows: 1. The washing is in an unbalanced state when washing: when there are more clothes, it is possible that the washing cannot be adjusted to the balance, and then it will be adjusted to a low speed, resulting in the phenomenon of no dehydration, if this is the reason, then it is easy to deal with, as long as you put less clothes into it, it will not cause imbalance, and it will not affect the dehydration.

2. The safety switch of the top cover of the washing machine is damaged: when dehydrating, the washing machine is running at high speed, try not to open the cover at this time, which will cause the top switch to be damaged, if the switch is damaged, there will be no dehydration. Here is a reminder to everyone, in order to avoid the washing machine can not be dehydrated, do not open the lid during the washing process.

3. The texture of the clothing is caused: there are many types of clothing in winter, such as some sub-types, these water absorption will be stronger, if you choose low-speed dehydration at this time, there may be an illusion, it is recommended that this kind of clothing with strong water should use high-speed dehydration. 4. The drainage system of the washing machine is blocked

When the drainage system is blocked, it will also cause the water in the cylinder to not be discharged, and when there is too much foam in the barrel, the water level switch cannot be reset, and there is no way to enter the dehydration process. If this is the reason why you can't dehydrate, it is recommended to remove the drain filter for cleaning and remove some debris inside. 5. The water level switch cannot be reset

The dewatering process is started after the drain is cleaned, and it is only started under the condition of resetting, if the drain switch is damaged, there is no way to enter the dewatering process, so you have to contact the after-sales point to repair.

It's normal for the washing machine to shake badly when it is dehydrated. 2. If the shaking is too large, check whether the transportation bolts of the cylinder on the back of the washing machine have been disassembled, and it is recommended to remove the back cover at the same time, and remove the bolts and the plastic gasket inside. 3. The shaking caused by the clothes not being evenly placed is severe.

Suggested solutions: 1. The shaking block may be caused by the fact that the transport bolts of your washing machine cylinder are not disassembled, these screws are used to prevent the washing machine from fixing the heavy cylinder barrel during transportation, so as to protect the shock absorber and not disassemble it, of course, the shock absorber will not work, and the vibration will be amplified. 2. The washing machine is dehydrated and shakes badly, mainly caused by the unbalanced placement of clothes.

When the clothes are placed unbalanced, the centrifugal force generated when the spinning bucket rotates at high speed will cause the washing machine spinning bucket to vibrate very much, and the abnormal sound is also relatively large. When placing clothes in the dehydration bucket, place them evenly around the circumference of the bucket, and gently press it with your hand, and then cover the inner lid of the dehydration bucket 3. The sound insulation board on the balance of the washing machine may not be installed, and the sound insulation board will be installed well, and the problem of shaking will be solved. If it still can't be solved, then you need to ask a professional master to repair it.

The dehydration shaking of Haier ultra-clean washing machine is like this, because the level under this washing machine has not been flattened, so it will dehydrate and shake greatly, so the battery must be flattened.