Problems with installing XP 15

1.Boot the disc in the BIOS settings.

Because the BIOS of each company is different. There are different settings.

Most motherboards are delete.

Go to the BIOS home page, click the Boot page, use the up and down arrow keys on the keyboard to reverse the first option, press the Enter key, and you will enter the next page.

Some motherboards do not have a Boot page, but save the Boot sequence in the BIOS Features Setup page, and you can only choose A, CDROM, C when modifying: A, CDROM, C, as long as you select the CDROM in front of C (hard drive), because if the first option is A (floppy drive), and the floppy drive does not have a floppy disk in it, the BIOS will automatically enter the second option, CDROM.

2.Before you save it, remember to put the Windows installation disc into the CD drive, and press Enter to automatically reboot it. At this time, pay attention to the appearance of the fluorescent screen, 3

Before the five periods are finished, quickly press any key on the keyboard, and it will officially enter the boot by the disc.

Say the above instructions again; Enter the BIOS first to set the boot order, and the CD drive will be booted first;

And put the Windows XP installation disc into the CD drive, when the screen appears Press any key to boot from cd..., quickly press any key on the keyboard, at this time, on the fluorescent screen, the program in the display disc is busy detecting the hardware equipment in the computer, until the first picture file below appears, the installation of the operating system is officially started!

You won't lose your hard drive. That's just setting the boot order!

Pay attention to see if the disc has any sound and phenomenon of being activated.

Tell you ho the current system ho it's useless for you to just set the first boot to cdroom.

You also have to set the second driver and the third driver to none in the BIOS.,Of course, you have to remember it before setting.,After installing it, you have to set it back.,Then save and restart it's OK You can use the disc driver to install XP.。

If you want to format the C disk, ho don't choose automatic installation when you install it, and then install it step by step, it has to choose which disk to install it on for you, and it will also give you the option to format each disk, you have to look carefully at every step, otherwise you will miss it.

Select the disc boot in the first boot of the BIOS, and there is an option on the screen when you reboot It means that the disc boots up to press any key Hurry up and press any key, otherwise the hard disk is still starting up You have to press it quickly, and if you miss the opportunity, the hard disk will start on its own Remember to add points!!

After entering the BIOS's First Boot and selecting CDROM, press F10 to save and then use the 98 boot disk to boot, after entering the DOS, put the WinXP disc in it, and run i386 Winnt to install it.

Friend, can you be sure that your optical drive and the disc are fine? Generally, go to BIOS>First Boot>Select Optical Drive Priority Boot" F10 to save and exit. Put the disc in. Both optical drives and discs can enter the installation interface without any problems.

Just use the PQ grid first. It's OK to install it again.

Friend, can you be sure that your optical drive and the disc are fine?