The floor height of the structure refers to where it goes, and the floor height of the building refe

Structural height refers to the distance from the top of the structural component of the current layer (such as the top of the structural plate or the top of the structural beam) to the top of the structural member of the previous layer.

Under normal circumstances, the higher the floor height of the house, the greater the temperature difference between the upper and lower spaces in the room, and the stronger the air convection in the room, the better the ventilation effect, but on the other hand, it will lead to relatively poor heat preservation and energy saving of the house.

The floor height of ordinary commercial residential buildings should be meters.

First, the height of the structure.

Structural height refers to the distance from the top of the structural component of the current layer (such as the top of the structural plate or the top of the structural beam) to the top of the structural member of the previous layer.

There is usually a building surface layer between the finished surface of the structure and the finished surface of the building, including leveling, waterproofing, plastering, sound insulation, etc., according to different functions, different surface practices, and different thickness of the surface layer.

Second, the difference between the height of the structure and the floor height.

If the building surface layer of the upper and lower floors is the same, then the floor height = the structural floor height; If the building surface layer is different, then the floor height is different from the structural floor height.

3. The difference between floor height and net height.

1. Floor height. Refers to the vertical distance between two adjacent floors or between the floor and the ground. If the top floor is a sloping roof, its height is calculated by the vertical distance between the floor surface and the lower part of the roof.

2. Clear height. The difference between the height of the floor minus the thickness of the floor slab or the height of the structural layer. That is: clear height = floor height - floor thickness. The clear height is usually the height that the buyer measures directly indoors, and it is also the height that can be used in the real building after moving in.

3. Differences. The height of the storey, literally, is the height of a one-story house. Floor height refers to "the vertical distance between the upper and lower floors or the floor and the ground".

When it comes to ceiling height, we have to distinguish it from "ceiling height". Ceiling height is defined as "the vertical distance between the floor or ground and the bottom of the upper floor slab or ceiling." "The relationship between the ceiling height and the floor height can be expressed by the formula:

Floor height = indoor clear height + floor thickness, that is, the difference between floor height and floor thickness is called indoor net height. Contract for the sale and purchase of commercial housing.

In general, the floor height is agreed, and many buyers measure the indoor net height when handing over the house, and the thickness of the floor slab will also be ignored.

The height of the structure and the height of the floor should also be paid attention to when decorating.

Structural layer height: For example, 3m, is the upper structural plate of this layer, which is consistent.

Floor structure elevation: It is the height of the floor, such as 6m, 9m

Floor elevation to previous floor elevation.

Floor height refers to the top surface of the floor slab on the first floor to the top surface of the floor slab on the previous floor. It can be found in the section of the building drawing. The height of the floor contains the thickness of the floor slab

The floor height of a building refers to the vertical distance between the upper and lower floors.

2 Terminology 2 0 1

Story

height

The vertical distance between the upper and lower floors or the floor and the ground.

Normative terminology.

It's definitely the right solution!

The floor height is the vertical distance between the upper and lower floors or the floor and the ground. That is, the height of a one-story house. In the "Harmonised Standard for Residential Building Modulus" issued in 1987, it is clearly stipulated that the floor height of brick-concrete structure residential buildings shall be adopted:

In addition to "meters", the height measurement of the house can also be calculated by "layer", and the height of each floor has certain requirements in the design, which is called the floor height. Floor height usually refers to the distance between the lower floor or slab face and the upper floor face. The difference between the floor height and the thickness of the floor slab is called the clear height.

In order to reduce costs, save building materials, save land and other considerations, the general residential floor height is about meters.

Floor height refers to the distance between the lower floor or slab surface and the upper floor surface.

Floor height refers to the height of the house measured in layers, the height of each floor has requirements in the design, this height is called floor height, it usually includes the distance between the lower floor surface or the floor surface and the upper floor surface. The Ministry of Housing and Urban-Rural Development and the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China jointly issued the "Residential Design Code", which stipulates that the height of residential floors should be meters.

The vertical height from the floor to the roof also includes the height from the floor to the roof of the house, but neither the roof nor the landing should include the height of the insulation. The floor or floor should also not include the thickness of the decorative layer, such as the decorative thickness of the wood floor, plastic flooring, ceramic tile, stone sheet and other block material surface layer laid for decoration.

Floor height type:

1. Structural layer height.

In some academic works and documents, the use of structural floor height, which refers to the vertical distance between the upper and lower levels of the building, has also been raised. After the completion of the house, the structural layer of each floor of the house has been buried by the upper structural layer layer, which is difficult for actual measurement and subsequent retesting or testing. In addition, the structural plane is a rough and uneven surface, which cannot be accurately measured.

2. The height of the center line.

The centerline floor height refers to the vertical distance between the center line of the upper and lower layers of the house, and it is not clear whether the basis for the center line height is due to the fact that the building area of the house is calculated in the "Property Surveying Code" using the center line size, and it is not known. The midline size of the layer thickness can be found according to the thickness of the floor layer and the roof layer, and the measurement reference surface also exists.

The height of a structure is the vertical distance between the upper and lower floors or the floor and the ground, that is, the height of the one-story house.

The relationship between indoor clear height and floor height can be expressed by formula: floor height = indoor clear height + floor thickness, that is, the difference between floor height and floor thickness is called indoor clear height. In the Contract for the Sale and Purchase of Commercial Housing, the floor height is generally stipulated, while many buyers measure the indoor net height when handing over the house for acceptance, ignoring the thickness of the floor slab.

1.Floor height refers to the vertical distance between the upper and lower floors of a house, or the second floor to the ground, or the floor to the roof structural layer.

2.Structural floor height refers to the vertical distance between the upper and lower layers of the house.

3.In the case that the building surface layer of the upper and lower floors is the same, the floor height and the structural floor height are the same; In the case that the building surface is different from the middle floor, then there is a numerical difference between the floor height and the structural floor height, and the general structural floor height is lower than the floor height.

The floor height of a house has been defined as: the vertical distance between the upper and lower floors of the house, or the floor to the ground, or the floor to the roof surface, that is, the reference surface for the measurement of the floor height of the house is the floor, the ground and the roof surface. The reference of real estate surveying is very important to the implementation of the survey, which directly affects the results of the real estate survey and the fairness of the real estate survey results.

I don't know what you mean, but the only way to say height in architecture is floor height, building elevation, and structural elevation.

Floor height refers to the height between the floor floor and the upper floor floor, and the building elevation and the structural elevation are the height of the floor relation, and the building elevation of the building floor is higher than the structural elevation, and the difference is a decorative ground thickness.

Definition of floor height: refers to the vertical distance between the structural elevation of the upper and lower floors (or ground to floor); The height of the top floor is the vertical distance from its floor to the structural elevation of the roof (lowest).

Floor height refers to the height of the house measured in the unit of "floor", and the height of each floor is required by the country in the design, and this height is called the floor height. It usually includes the distance between the lower floor or slab face and the upper slab face.