What are the most complete and up to date building codes, and what are the common codes for architec

I have a Certified Structural Engineer reference book that is all specification guides or not.

Commonly used are "Mandatory Provisions of Engineering Construction Standards, Housing Construction Part", "General Principles of Civil Building Design", "Code for Fire Protection Design of High-rise Civil Buildings", "Code for Residential Building", "Code for Office Building Design", "Code for Residential Design", "Code for Fire Protection Design of Buildings", etc.

1. Code for Load of Building Structures (GB50009-2001) (2006 Edition) 2, Code for Design of Concrete Structures (GB50010-2002) 3, Code for Design of Building Foundations (GB50007-2002) 4, Code for Design of Steel Structures (GB50017-2003) 5, Code for Seismic Design of Buildings (GB50011-2008) 6, Code for Design of Masonry Structures ( GB50003-2001) 7 "Technical Regulations for Concrete Structures of High-rise Buildings" (JGJ3-2002) 8, "Technical Specifications for Building Foundation Treatment" (JGJ79-2002, J220-2002).

9. Code for Design of Timber Structure (GB50005-2003) (2005 Edition) 10. General Code for Design of Highway Bridges and Culverts (JTGD60-2004).

2. According to the content: design standards, construction and acceptance standards, and construction quotas. 3. Classification by attributes:

Technical standards, management standards, work standards.

Legal basis: Regulations on the Quality Management of Construction Projects

Article 25 The construction unit shall obtain the corresponding level of qualification certificate in accordance with the law, and undertake the project within the scope permitted by its qualification level. It is forbidden for the construction unit to exceed the business scope permitted by the qualification level of the unit or to contract the project in the name of other construction units. It is forbidden for the construction unit to allow other units or individuals to contract the project in the name of the unit.

The construction unit shall not subcontract or illegally subcontract the project.

Article 26 The construction unit shall be responsible for the construction quality of the construction project. The construction unit shall establish a quality responsibility system and determine the project manager, technical person in charge and construction management person in charge of the project. If the construction project is contracted generally, the general contractor shall be responsible for the quality of all construction projects; If one or more of the survey, design, construction and equipment procurement of construction projects are subject to general contracting, the general contractor shall be responsible for the quality of the construction projects contracted or the equipment purchased.

Article 27 Where the general contractor subcontracts a construction project to another unit in accordance with the law, the subcontractor shall be responsible to the general contractor for the quality of the subcontracted project in accordance with the provisions of the subcontract, and the general contractor and the subcontractor shall be jointly and severally liable for the quality of the subcontracted project.

Article 28 The construction unit must construct in accordance with the engineering design drawings and construction technical standards, and shall not modify the engineering design without authorization, and shall not cut corners. If the construction unit finds that there are errors in the design documents and drawings during the construction process, it shall put forward opinions and suggestions in a timely manner.

The Building Design Code is also known as the "Building Design Standard Code". It refers to the technical standards stipulated by the state or relevant departments for the design of capital construction.

Architectural design code is the basic basis of all kinds of engineering design, an important part of the standardization of architectural design, and an important basic work in the management of engineering construction technology. The content generally includes: application scope and building classification requirements; General plan design index of the building; Architectural design indicators and key data for different purposes; provisions relating to guaranteed use; health care requirements; main technical and economic indicators, etc.

According to the management level and scope of use, the design standard specification can be divided into four levels: national, departmental, provincial (municipal, autonomous region) and design unit. For example, Japan has incorporated some of the main contents of the building design code into the Building Standards Law and its Implementing Order as supplementary provisions to the law; The Soviet Union included building design codes within the scope of the standard.

Architectural Design Code Supervision Process

In some countries, the architectural design code is compiled by experts organized by the competent department of the Pengqing department, and published after review and approval; In some countries, "model texts" are prepared by academic societies or civil society organizations, and are adopted in whole or in part by special decrees issued by ** or local legislatures. There are four "model books" of building codes in the United States, which are chosen to be adopted by the legislatures of each state or large city.

After the architectural design code is formulated and published, it will be supervised and implemented by the executive machine and the reserve. In many countries, the competent department of urban construction is responsible for this work, and special personnel are set up to review the construction drawings according to the specifications, and the designers are instructed to revise the designs that do not meet the requirements, and then the construction permit is issued. During the construction and use of the building, the competent authority may check whether the homeowner is using and maintaining the house correctly in accordance with the requirements of the building code.

The above content refers to Encyclopedia - Building Design Code.

Legal Analysis: Mandatory standards for engineering construction refer to the mandatory provisions of engineering construction standards that directly involve engineering quality, safety, health and environmental protection. New technologies, new processes and new materials to be used in the construction of the project, do not meet the provisions of the current mandatory standards, shall be submitted by the proposed unit to the construction unit to organize special technical demonstration, submitted to the construction administrative department for approval of the standard or the relevant competent department for approval.

The use of international standards or foreign standards in the construction of the project, the current mandatory standards are not stipulated, the construction unit shall be filed with the competent administrative department of construction or the relevant administrative department.

Legal basis: "Regulations on the Quality Management of Construction Projects" Article 22 The building materials, building accessories and equipment selected by the design unit in the design documents shall indicate the specifications, models, performance and other technical indicators, and the quality requirements must meet the standards stipulated by the state.

Except for building materials, special equipment, process production lines, etc., the design unit shall not designate a production plant or a manufacturer.

Building code: The minimum requirements for building safety, quality, and function put forward by the ** authorized agency, and these requirements form a building code in the form of documents, such as fire codes, building space codes, building module standards, etc.

Basic overview of building code specifications:

National Standards of the People's Republic of China.

Residential Building Code.

residential building code

gb 50368—2005

Editor-in-chief Department: Ministry of Construction of the People's Republic of China Approval Department: Ministry of Construction of the People's Republic of China.

Effective Date: March 1, 2006.

Ministry of Construction of the People's Republic of China.

Announcements. No. 385.

Announcement of the Ministry of Construction on the issuance of the national standard "Code for Residential Buildings".

The "Code for Residential Buildings" is now approved as a national standard, numbered GB 50368-2005, and has been implemented since March 1, 2006. All provisions of this Code are mandatory and must be strictly enforced.

This specification is published and distributed by the China Building Industry Press organized by the Institute of Standards and Quotas of the Ministry of Construction.

Ministry of Construction of the People's Republic of China.

30 November 2005.

What are the more commonly used building codes in China?

GB T50001-2010 Unified Standard for Building Drawing.

GB50003-2011 Code for design of masonry structures.

GB50007-2011 Code for design of building foundations.

GB50009-2012 Code for Structural Loads on Buildings.

GB50010-2010 Code for design of concrete structures.

GB500026-2007 Code for Engineering Surveying.

GB50086-2001 Technical specification for bolt shotcrete support.

GB50098-2009 Code for fire protection of civil air defense engineering design.

GB50108-2008 Technical specification for waterproof and quiet fiber for underground engineering.

GB50134-2004 Code for Construction and Acceptance of Civil Air Defense Engineering.