-
Anonymous users2024-02-06Personally, I don't think there are any precautions, the use of SSDs and HDDs is the same, but SSDs are faster than HDDs in terms of speed, so that we can use the computer in the process of reading faster and more effectively. So the precautions you mentioned or something, it doesn't seem to be that complicated, and it's okay to use it normally. Don't worry too much and be anxious, there's nothing.
-
Anonymous users2024-02-05The first time a new SSD hard drive is used, it must be 4K aligned.
You want to get the most out of your SSD drive. For example, the most common ones are to turn on AHCI, 4K alignment, use native interfaces, use supported hard disk data cables, and so on. If it is not set properly, it will greatly affect the real performance of the SSD, causing unnecessary waste.
-
Anonymous users2024-02-04New SSDs need to be partitioned before they can be used.
It's just one district or several.
When partitioning, pay attention to the checkbox: Align to 4096.
This is commonly known as 4K alignment.
-
Anonymous users2024-02-03New SSDs need to be partitioned and formatted just like HDDs, so be sure to turn on 4K alignment, otherwise you won't be able to fully exploit your performance.
-
Anonymous users2024-02-021.The reason why SSDs get slower and slower SSDs are used more and more slowly, which has a lot to do with how SSDs work...
2.Environment: win7+ahci+sata3 You must use Windows 7 or above.
3.Partition method: small partition, less partition The so-called "small partition" is not to fill the capacity of the SSD ,..
5.Flashing Firmware: The Most Effective Way to Speed Up SSDs Everything that does inside an SSD is controlled by the firmware.
-
Anonymous users2024-02-01Advanced activation allocation partition is ready to use.
I hope mine is helpful to you.
-
Anonymous users2024-01-31SSDs are not recommended to be partitioned, and most of them will affect the junk mechanism.
-
Anonymous users2024-01-30About the new stunningSolid state drivesFor the first time, we should pay attention to two aspects, and the following are the specific operation methods.
1.Check that the SSD is brand new.
When the new disk arrives, the crystaldiskinfo software silver is checking the number of power-ons and power-ons, which can prevent most of the old profiteers from charging the new. The normal power-on times should be 1 or 2, and the power-on time is 0, otherwise it has already been passed.
2.Make sure that the motherboard has AHCI mode enabled.
Press the DEL key to go to BIOS settings at boot, find SATAMODESELECTION in the Advanced menu, and make sure it is set to "AHCI", so as to ensure the full performance of the SSD.
-
Anonymous users2024-01-29There are four things to look out for:
Reserve a small sub-district to answer the brigade;
To clear the missing stool for 4k alignment;
Enough space should be reserved;
Do not defragment.
The easiest way to maintain "4K alignment" is to use the Windows formatting tool to format the partition during the installation process of the system, so that the partition is directly 4K aligned.
The more SSD storage, the slower the performance. And if a partition is stuck at more than 90 percent for a long time, the likelihood of an SSD crash is greatly increased. Therefore, it is necessary to remove useless files in time, set the appropriate virtual memory size, and store large files such as movies on the mechanical hard disk.
-
Anonymous users2024-01-281. Right-click on this computer and select Properties, as shown in the figure below.
2. Click Device Manager on the Properties interface, as shown in the figure below.
3. Click on the disk drive in the Device Manager interface, and you can see your newly added SSD, as shown in the figure below.
4. Return to the desktop, right-click on this computer and select Manage, as shown in the figure below.
5. Next, you need to click Disk Management on the management interface, as shown in the figure below.
6. The system prompts that the new disk needs to be initialized. Select the partition form and click OK, as shown in the following figure.
7. On the disk management interface, you can see your disk 1 below, right-click the disk area, and select Create a simple volume, as shown in the following figure.
8. After the partition is formatted, click the Finish button, as shown in the figure below.
9. At this time, you can see your partition in the disk partition, and you can also see the drive letter when you enter this computer, as shown in the figure below.
-
Anonymous users2024-01-27There is no difference between the installation of an SSD and an HDD, as long as the data cable and the power cable are connected, it can be booted up.
In terms of settings, there are two things to keep in mind when using SSDs:
First, the AHCI feature needs to be enabled in the BIOS. This feature can greatly improve the read and write performance of SSDs.
Second, before installing the system, the SSD needs to be 4K aligned, otherwise it will seriously affect the read and write performance of the SSD.
To sum up, after installing the SSD, it is best to use the pure version of the system to install the operating system, which comes with an AHCI driver, and will automatically align the SSD to 4K, which can maximize the performance advantages of the SSD.
-
Anonymous users2024-01-26First of all, you have to install the SSD on the motherboard, then take a USB flash drive with PE and plug it into the computer, turn it on, press the shortcut key to select the USB flash drive to start, enter the PE, enter the partitioning software, divide the SSD into the main partition, and then install the system in this partition.
-
Anonymous users2024-01-25The newly purchased SSD is the same as the ordinary mechanical hard disk or USB flash drive, and only needs to be attached to the hard disk bay of the chassis, and enter the operating system to format the default format with Windows.
-
Anonymous users2024-01-24Once installed, the partition is ready to use.
Be sure to pay attention to 4k alignment when partitioning.
-
Anonymous users2024-01-231. Do not use Disk Utility to "defragment" the SSD. Solid-state drives are different from mechanical hard disks, the accumulation of fragments generated during the reading and writing process of mechanical hard disks will affect performance and need to be organized, but SSDs are not, and defragmentation is ineffective for SSDs.
2. Don't use too much performance tester tools. The performance of SSDs is much stronger than HDDs, so running score tests and then taking screenshots has become a common thing for gamers to do. This will cause more read and write loss on the SSD, which will speed up the rapid performance degradation.
3. Pay attention to the "trim" of Zen Yinqi. The role of TRIM is to make reasonable optimizations for SSDs to reduce the rate at which their performance degrades.
4. Select the high-performance power mode. Energy savings, while saving power, also begin to degrade performance, and this is also the case with SSDs.
-
Anonymous users2024-01-22The first use of the new solid-state hard non-bright disk needs to be done as follows:
Tools Raw materials: Lenovo Xiaoxin air15, windows10,.
1. Which source of the new hard disk is to use crystaldiskinfo software to check the power-on times and power-on time. The normal power-on times should be 1 or 2, and the power-on time is 0, otherwise it has already been used.
<>3. Choose an SSD without partitions, if the dry width has been divided before, you need to delete all partitions in Disk Management first.
4. The partition assistant only migrates the content of the original C drive, and there is no need to partition the general small-capacity SSD.
5. After the migration wizard ends, you need to click "Submit" to start.
6. Click "Execute", then the computer will restart and automatically start the system migration, clone the system to the new SSD.
7. After the system migration is completed, you need to enter the BIOS settings again and change the first boot item to an SSD.
There are too many precautions to be made, and it is not something that can be explained in one or two clicks. I found you an article below. If you want to be detailed, then you'd better google the microwave precautions, and then find some of the ones you need on the web page, copy and paste them into the world, and finally print them out yourself. >>>More
Heat transfer oil is widely used as a heat transfer medium for industrial oil, and the following will take you to understand the protection matters in the use process of heat transfer oil. >>>More
This is the precautions for the use of our unit, which is summarized by ourselves for the problems that often occur in users, and should have a certain reference value, I hope it will help you. >>>More
With an oven at home, you can eat as many foods as you want, and you don't need to buy them outside, such as roasted sweet potatoes, roast duck, kebabs, etc., as long as you want. Although they know the function of the oven, many people have never used the oven in real life, and they don't know what its usage is. So, what are the usages of the oven? >>>More
Primary school students should do a good job of safety protection during the summer vacation, do a good job of preventing electricity at home, pay attention to food hygiene when going out, do not eat outside things, do not go out to unhealthy places, do not go to social Internet cafes, and do not go to wild baths.