How can a succulent grow a long head, and how can a succulent become a long head?

When many flower friends just started to raise succulents, they just wanted to be able to feed them, and with the increase of maintenance time and the continuous improvement of technology, they began to think about new tricks. Cliff piles, jelly-colored, group old piles ......It's a lot of fun. Among them, how to turn the succulent from a single head to a long head is the dream result of many flower friends, so how can you turn a single head into a multi-headed and multi-headed?

Plants themselves have their own growth laws, and the same is true for succulents, if you want them to have a single head to become multi-headed, or even a group, it must require human intervention, so how to operate?

First of all, topping.

Flower friends who raise camellias, jasmine, and longevity flowers know that only by regularly topping the operation can promote the growth of side branches of plants, it is easier to bloom more, and topping can also effectively prevent the plant from growing too tall, maintain a good shape, and enhance the ornamental value. For succulents, it is also possible to use topping to promote their headshot side branches, which is to gently dispose of the top layer of new leaves with a knife or toothpick.

Secondly, the leaves.

For many long succulents, flower lovers often take the method of plucking off the bottom leaves, so that their stalks can be lignified as soon as possible and grow into old stumps. Many times you will find that there will be a lot of side buds in the place where the leaves are removed, with the growth of the side buds, the succulent will become many heads or even burst pots, and when the leaves are picked, it is necessary to pay attention to water control in advance to prevent the destruction of the growth point and leave scars on the stalks, which greatly affects the appearance.

Then、Leaf cuttings。

The greatest joy of raising succulents is that you can grow them into new plants with a single leaf, and watching them grow up is really rewarding. One of the biggest advantages of succulents is that they are very easy to multi-headed, and it is also possible to cultivate embellished succulents, so leaf cuttings are an important way to turn succulents into multi-heads, only need to choose healthy leaves, gently remove them to ensure that the growth point is intact, and it is very easy to take root and sprout.

Finally, beheading.

This method is a bit similar to topping, but for flower friends who like succulents, it will feel a little cruel, and if it is not done properly, it will also cause black rot water, which is a bit more than worth the loss. The biggest advantage of cutting off the head is that the effect is very obvious, the success rate is also high, for the long flesh can be very careful to cut off their heads, when cutting the head to leave more buds, it is easier to grow more heads.

The succulents of the multi-headed are really good-looking, and if you master the above 4 methods, you can easily cultivate a multi-headed or even headshot succulent, but no matter which method is used, it is best to do it in the spring and autumn season, which is the growing season of succulents, and the probability of success will be greatly improved.

Hello, the succulent can be applied with carbendazim, and the effect of generating multiple heads is still very fast, but now that it is summer, it is not recommended to use it; You can wait for the autumn to use it and try it out.

Fleshy reluctant to cut off the head and want to become long? Try this method to become long without cutting off your head.

Succulents are generally displayed in a delicate and cute image, but sometimes we may grow a succulent plant in a pot that is more single-headed and does not reflect its ornamental value to the fullest. Many pot friends hope to turn a single-headed succulent plant into a multi-headed situation to enrich the plant type, how to turn so many succulents into a multi-head? The following is the pot farming method that I have collected for you, let's take a look!

In fact, whether or not you need to grow a single-headed succulent is mainly based on personal preference. But in general, a succulent plant is displayed in the form of multiple heads, and the plant type tends to appear fuller. However, some pot lovers may also like the effect of a single head, so they still need to adjust the maintenance strategy according to their personal needs.

Below, I will share with you two practical ways to change the succulent from single to long.

First, the beheading method

Cutting off heads to change succulents from single to multi-headed is relatively straightforward and quick to take effect. However, there is a certain risk that if the head is not cut in the right position, it may affect the normal growth and germination of the mother plant.

Second, the traction method

The traction method is to displace the succulent growth point, so that it can burst out with multiple heads. This method actually spreads out the growing points of the meat, especially when it is long. Because the plant generally has a top growth advantage, let its long trunk fall down, its top growth advantage will naturally disperse, and many small buds will burst out on the lodging trunk.

As the small shoots continue to grow, they naturally form a long head.

The use of traction method to make succulents achieve multiple heads is not only suitable for snowy areas, but also suitable for succulents such as thousand bergamot, etc., and they are all pulled in the case of long stems and become top-heavy, and it is often easier to achieve the growth effect of making the plant burst out of multiple heads.

Although the traction method is not as easy to achieve results as cutting off the head, it is safer and will not cause any harm to the plant. If you have insufficient experience in beheading and do not know how to chop the head, it is recommended to use the traction method to achieve a safer one. This method is simple and easy to implement, and the requirements for natural conditions are not high, and it can achieve the effect of turning a single head into a long head in the process of natural growth.

It is naturally formed in the process of growing itself. Succulent plant refers to a plant with thick and juicy leaves and the function of storing a large amount of water, also known as "succulent plant".

Organization:

It has at least one succulent tissue This tissue is a living tissue that, among other functions, stores available water and enables plants to temporarily escape from external water and survive independently when the soil moisture content deteriorates and plant roots can no longer absorb and provide the necessary water from the soil.

According to rough statistics, there are more than 10,000 species of succulents in the world, belonging to more than 100 families in classification, and succulents can also purify the air.

1. Light: During the growth period, the succulent will provide 5-7 hours of sunlight every day, and it will be moved to a semi-shaded place for breeding in summer. 2. Watering:

After the potting soil is compacted and dried, the succulent is watered to keep the soil moist. 3. Temperature: The most suitable temperature for breeding is 20-30 degrees, and it should not be lower than zero degrees in winter.

4. Pruning: Cut off the long branches, and then cut off the old branches, overlapping branches, and weak branches.

1. Light

Succulent old pile long head to maintain enough sunlight, in the growth period to receive an appropriate amount of light every day, can be maintained at 5-7 hours of sunlight, to promote the full growth of roots, stems, leaves. When the sun is strong in summer, it is necessary to properly shade to prevent exposure.

2. Watering:

Succulent old pile multi-head do a good job of watering measures, each watering to do not dry or water, keep the potting soil slightly dry environment, do not keep it moist for a long time. In this way, the succulent will increase drought tolerance, enhance its own nutrient accumulation capacity, and the rhizome will gradually expand.

3. Temperature

Succulent growth of old piles should be kept in a warm environment, for example, the most suitable growth temperature is 20-30 degrees. Because it is not cold-tolerant, if it is below 0 degrees, it will cause frost damage. Therefore, in the winter, it should be placed indoors in a heated position.

In summer, when the temperature is high, move to a cooler and more ventilated environment.

4. Pruning

Succulent old piles should be pruned properly, pruning off the growing parts, and cutting off the branches for cuttings and propagation. In addition, diseased branches, old branches, overlapping branches, weak branches, etc. are also cut off, so as to avoid nutrient consumption and achieve the permeability and light transmittance of the whole plant.

If you want to raise the succulent into an old pile, it is best to choose a ceramic plate or tile pot when breeding, and the soil for breeding is best to be loose, fertile and well-drained. When breeding succulents, you can water according to the principle of not drying and not watering, watering is watering, and the breeding process should not only let the plants receive sufficient light, but also do a good job of shading.

1. Choose potting soil

Some people will ask how to grow old piles and longs in succulents, succulents generally take 2 or 3 years to grow into old piles, if you want to make succulents become old piles as soon as possible, you need to choose the right potting soil. Succulents can usually be cultivated in ceramic trays or tile pots, and the soil for cultivation is loose, fertile and well-drained.

2. Reasonable watering

If you want to raise succulents into old piles, you need to water the plants reasonably, succulents grow in deserts, have strong drought tolerance, and the demand for water is not high. When breeding succulents, you can water the plants in accordance with the principle of not drying and watering, and watering the soil can be wet every time you water, so that it is not suitable to leave stagnant water.

3. Sufficient light

In order to make the succulent old pile long, light is very important, the demand for light is high, and it is best to place the succulent in a ventilated and sunny environment such as balconies and window sills when breeding. The temperature is high in summer, and the plants need to be properly shaded at noon every day to prevent the plants from being sunburned by strong light.

4. Control the temperature

Succulent is not cold-tolerant, in order to make it an old pile multi-headed, it is best to control the temperature in the appropriate growth temperature of the plant when breeding, and do a good job of cooling down when the temperature is too high in summer. In winter, when the temperature is low and the succulents will enter the dormant period, it is best to place the plants in a warm place indoors in advance, and at the same time take measures to protect against the cold.

1. Succulents usually have the characteristics of heat tolerance, drought tolerance and high ornamental value, so they are more suitable for potted planting. But in the process of raising more meat, we often find that our own meat grows more than we know. For pot lovers who like succulents and stand alone, they often hope that the plant can return to its original single-head appearance.

This will inevitably need to be carried out separately, then.

2. There is an essential difference between splitting heads and cutting heads, splitting heads is to separate multiple heads grown from the succulent plant from the mother plant, so that the mother plant maintains one head; Cutting off the head is to look down at the upper part of the fleshy with the advantage of the apex, so that it will germinate more side branches, so that the plant shape is fuller, and at the same time, the phenomenon of growing multiple heads may also occur, which are two completely different concepts.

3. For sedum succulents, cuttings are relatively easy to take root and survive, and whether it is a split head or a cut off part, it is easier to cultivate a new succulent potted plant by cutting it in the buried soil of Peixiaochai. And when the succulent grows multiple heads, many people like to separate their excess heads from the mother plant and then cultivate them by cuttings separately. In this way, it is possible to obtain many succulent potted plants that are almost similar.

4. However, in the process of separation, we need to strictly follow the specifications to Zhaoheng, otherwise it may not only lead to the death of the mother plant, but also make it difficult for the young plants to survive. First, multiple heads are cut from the mother plant with a sterilized knife, and one head can be kept on the mother plant, which may or may not be retained, depending on your needs.

5. Next, put the cut heads aside to dry the wound. Since there are wounds on the mother plant and the part that is seen, in order to avoid the phenomenon of wound infection, it is necessary to carry out the necessary treatment of the wound in time, and drugs such as carbendazim and potassium permanganate can be used to sterilize and disinfect it. After the wound has dried and coagulated, the multi-heads are inserted into the culture soil to breed young plants.

6. The process of separating succulents after the appearance of multiple heads must be done cautiously, and be implemented according to the needs and the growth of the plant to avoid affecting the normal growth of the plant. Moreover, in the process of separation, it is necessary to do a good job of disinfection and sterilization when touching the ants, and then plant in pots after the wound is dried. Not only that, whether it is a mother plant or a young plant, maintenance and management work in the later stage is indispensable to ensure that the succulent can quickly survive and return to normal growth after separation.