Why does Konka LCD TV automatically restart? Is it a self measuring problem???

It's generally a problem with the CPU,My TV also has this problem, and then it can't be turned on,The maintenance master came and said that the motherboard was broken,I want to pay 800 yuan,It's too expensive, I said I can't repair it,He asked me for a debugging fee,This is Konka's after-sales thumb plan,It's too chilling,You be careful,Don't be calculated by Konka,

The LED47X9000PD I bought has an automatic restart phenomenon, which is estimated to be a quality problem! Sometimes the remote control is pressed and the machine dies!

This is definitely a quality problem, and so is my family! He also said that he couldn't pack three packs, don't buy Konka, the after-sales service is super bad!

The automatic restart of Konka LCD TV is generally not necessarily a problem with the quality of the TV, but it may also be a problem with the system, mainly including:

1、System failure:There are bugs or errors in the system itself that cause automatic restart,It is recommended to restore the system of the TV to factory settings or upgrade to the latest version,You can enter【Settings】-System settings】-System restore】or【System upgrade】To solve the problem。

2. Automatic restart caused by failure of TV parts, such as poor contact of the motherboard circuit, moisture leakage of the high-voltage package, unstable power supply of the motherboard, etc., can only contact the after-sales service of the TV for comprehensive testing and warranty of the TV.

The TV with a hard screen has a high definition, and the picture effect is also good. The same goes for quality.

It should be a quality problem, you can find a repair to see.

Konka Group just can't do it, a broken TV hasn't been cleared yet, and what kind of refrigerator or something is produced, as long as it's Konka now, I'll tell others not to buy it, so as not to be deceived!

Uncle's, mine is also Konka, hard screen, now restart every two or three minutes, it turns out that the interval is longer, what a pit! Fortunately, if you don't watch TV much, it's not ruined.,Next time it's directly imported.,Although there are few functions.,But there are so many functions that there's a fart.,It's also sick!

I'll just disconnect the net and look at the set-top box.

There can be many reasons for Konka TV to automatically restart, and here are some possible reasons and solutions:

1.Problems with TV software: If there's a problem with your TV software, it can cause your TV to restart automatically. You can try updating your TV's software or doing a factory reset to fix the problem.

2.Power issues: A faulty TV power supply can also cause the TV to restart automatically. You can check if your TV's power cord is plugged in tightly, or replace the power cord to fix the problem.

3.Overheating issues: If the TV is used for a long time or placed in a poorly ventilated area, it may cause the TV to overheat and automatically restart. You can try placing your TV in a well-ventilated area, or use a TV cooling bracket to solve the problem of missing out.

4.Hardware failure: If none of the above methods can solve the problem, it may be caused by a hardware failure of the TV. It is recommended to contact Konka after-sales service center or professional maintenance personnel for maintenance and maintenance.

In short,There may be many original macro answers for Konka TV's automatic restart,It needs to be troubled and solved according to the specific situation。 If you are unable to resolve the issue on your own, it is advisable to seek professional help.

It may be the following reasons that cause Konka TV to restart automatically:1There is a malfunction or error in the TV software.

2.The TV is running out of memory, causing the system to crash. 3.

There's a problem with your TV's power supply or wires. 4.The TV is under a virus attack.

Workaround:1Try restarting your TV and see if that fixes the issue.

2.Clear your TV's cache and data, which can be found in the settings. 3.

Update your TV software to make sure it's up to date. 4.Check that the TV power supply and cords are in order, and if there is a problem, replace the power supply or cords.

5.Install anti-virus software, scan your TV system, and remove viruses. If the above methods cannot solve the problem, it is recommended to contact Konka customer service or professional technical crackers for repair.

There may be a variety of reasons for Konka TV to automatically restart,Here are some possible reasons and solutions to change the group:

Heat dissipation issues: If the Konka TV has poor heat dissipation, it may cause an automatic restart. The solution is to check if there are any objects blocking the sides of the TV, or place the TV in a well-ventilated location.

Power supply problems: If the power supply of the Konka TV is abnormal, aging, or the socket is not in good contact, it may also cause it to restart automatically. The solution or solution is to replace the power supply or repair the socket.

Software issues: If Konka TV's software is buggy or incompatible with the system, it may also cause it to restart automatically. The workaround is to upgrade your TV system or do a factory reset.

Hardware problems:If the hardware of Konka TV is faulty,Such as poor circuit contact of the motherboard、High-voltage package moisture leakage, etc.,It may also lead to automatic restart。 The solution is to contact Konka TV after-sales service for a comprehensive inspection, warranty or repair of the TV.

Hope the above methods are helpful to you.

1. System failure.

There is a bug or error in the system itself that causes it to automatically shut down and restart.

Second, the line is short-circuited.

If there is a situation where the voltage and current are unstable, it may be a problem with the automatic shutdown of the TV, don't deal with it in a hurry, let the TV temporarily be in a state of shutdown, wait for a period of time, turn it back on again, and check whether the problem of automatic shutdown exists.

If it is not there, Ken can be a problem with voltage, if the current is also carefully included in the unstable distribution, it is likely to be some lines on the wire version ** or open circuit, this needs to be disassembled first, start to check the line next to the old socks, if you find abnormalities, do not repair it immediately, check all the circuits again, to avoid missing places.

3. Overcurrent protection.

When the current load circuit causes excessive current for some reason, the overcurrent protection circuit will stop the power supply circuit from working.

Fourth, the problem of electric board.

For example, if the parts are not in good contact, you still need professional tools to disassemble the TV. Use a universal meter or test pen to inspect and repair the areas that have been in contact with each other.

Why does my Konka TV always turn off automatically after turning on and then turn on automatically,Keep repeating,A few seconds between switching on and off,What is the reason?

1、System 5261 Failure:4102There is a bug or error in the system itself, which causes automatic restart1653,It is recommended to restore the system of the TV to factory settings or upgrade to the latest version。 2. Automatic restart caused by the failure of TV parts, such as poor circuit contact of the motherboard, moisture leakage of the high-voltage package, unstable power supply of the motherboard, etc., you can contact the after-sales service of the TV for comprehensive testing and warranty of the TV.

3. The TV socket is restarted due to poor contact, you can change the socket and try again.

<> reasons why Konka TV always shuts down automatically include the following.

1. The internal circuit of the TV is soldered. Clause.

Second, the X-ray protection circuit of the TV is faulty. Third, the TV will automatically shut down due to overvoltage protection. Clause.

Fourth, the TV has overcurrent protection. Clause.

5. Caused by the hardware failure of the TV. It is recommended to find after-sales or professional maintenance personnel for maintenance of the above faults.

This answer applies to Konka LED43E330C TV.

Hello dear Konka TV will automatically shut down a few seconds after turning on the general reasons and solutions:1、System problems:There are bugs or errors in the system itself that cause automatic restart,It is recommended to restore the system of the TV to factory settings or upgrade to the latest version,You can enter [Settings]-System Settings]-System Restore] or [System Upgrade] to solve the problem; 2. Automatic restart caused by failure of TV parts, such as poor contact of the motherboard circuit, moisture leakage of the high-voltage package, unstable power supply of the motherboard, etc., can only contact the after-sales service of the TV for comprehensive testing and warranty of the TV.