-
First, the cause of the failure:
1. There is too much dust inside the computer, and the heat dissipation is not good;
2. Graphics card chip and heat sink.
poor contact between them;
3. Thermal grease on the graphics card chip.
Missing or dry, losing thermal conductivity;
4. The speed of the cooling fan of the graphics card is not enough, and the power is insufficient;
5. The last case may be caused by a hardware failure inside the graphics card.
2. Solution:
According to the reasons mentioned above, first observe whether the graphics card cooling fan is running normally, add some lubricating oil to the graphics card cooling fan (sewing machine oil is OK), if the fan is not damaged, you need to buy a new cooling fan, if you are not a professional, please remove the graphics card, and directly take it to the IT store to ask someone to replace the fan, which can generally be solved;
If the inspection reveals that there is a poor contact between the graphics card chip and the heat sink, it is necessary to apply thermally conductive silicone.
Smear between the fan and the graphics core;
If it is due to too much dust inside the computer, there is poor heat dissipation, you can dust the host, the easiest way is to take a high-power hair dryer to blow vigorously inside the chassis for a while, or disassemble each accessory, clean up the dust separately, if you are familiar with the computer, it is recommended to remove the internal hardware to clean up the dust;
In addition, due to the poor quality chassis that may be used, the internal cooling air duct is not smooth, you can disassemble the chassis shell or install a convection cooling fan on the chassis to reduce the temperature inside the host, so that the heat emitted by the graphics card can be quickly taken away to enhance heat dissipation.
If none of the above methods can effectively reduce the temperature of the graphics card, in most cases, the graphics card is faulty, it is recommended to take it to a professional repair shop for testing.
-
Hehe, graphics card heat doesn't have to be a driver problem. It could also be a problem with the host computer and you can turn the computer on. Clean the lower unit with a hair dryer or cloth.
In addition, it is now the summer temperature, and if the internal temperature of the home is high, the temperature of the computer graphics card will be even higher. That's where heat dissipation comes in. If possible, you can use an electric fan or turn on the air conditioner to dissipate heat.
If it's not external, you can choose to see the graphics driver restore, and if you don't have a backup, you can choose to install a separate version of the driver, try it out. There is software that can be installed on the driver. , Drive Elf, Drive Life, and 360, Drive Master, Master Lu, etc.
Hope it helps, hehe
-
Since the temperature of the graphics card driver is too high after the update, roll back the original driver of the graphics card in time.
Start the Control Panel.
Control Panel, System, Hardware, Device Manager.
Device Manager Right-click on the graphics card properties Driver Rollback Driver L
-
The new driver optimizes the games you play, speeds up the graphics card, and lets you adjust the game effects a little lower!
-
The drive works but is not suitable for 、、、
1. Observe whether the graphics card cooling fan is running normally, add some lubricating oil to the graphics card cooling fan (sewing engine oil is OK), if the fan is not damaged, you need to buy a new cooling fan, if you are not a professional, please remove the graphics card, and take it directly to the IT store to ask someone to replace the fan. >>>More
Use Everest Ultimate Edition Green Multilingual Edition or GPU-Z Chinese Edition **|pchome **center check the model of the graphics card, and then in the "driver home**self** matching the driver to update. >>>More
The temperature of the computer is too high, it may be used for too long, or it may be caused by too much dust, you can clean up the dust, or you can add a heatsink or a fan under the computer.
The speed prompt of the fan is an illusion, and the CPU temperature prompt just explains the reason for the automatic shutdown, the temperature is too high, but it is lucky not to burn the CPU, the fan problem is the key, and then the problem of the contact surface between the heatsink and the CPU, the two problems need to be solved at the same time. >>>More
Please check whether your computer is overheating when it shuts down automatically, and turn on the laptop immediately when it shuts down to see if the computer can be turned on. If not, it means that your computer is overheating, because your motherboard has overheating protection, the chip will automatically power off when it detects overheating to protect your hardware from damage. In this case, please contact the service station for dust removal and, if necessary, replace the thermal grease. >>>More