How to solve the problem that the temperature of the desktop graphics card is too high

1. Observe whether the graphics card cooling fan is running normally, add some lubricating oil to the graphics card cooling fan (sewing engine oil is OK), if the fan is not damaged, you need to buy a new cooling fan, if you are not a professional, please remove the graphics card, and take it directly to the IT store to ask someone to replace the fan.

2. If the contact between the graphics card chip and the heat sink is poor, you need to apply thermally conductive silicone between the fan and the graphics card core.

3. Pay attention to cleaning the dust in the chassis, and the dust on the graphics card should be cleaned even more. You can take a high-powered hair dryer and blow vigorously on the inside of the case for a while, or disassemble each accessory to clean up the dust separately.

4. Install a convection cooling fan on the chassis to reduce the temperature inside the host, so that the heat emitted by the graphics card can be quickly taken away.

5. Use software to reduce the frequency of the graphics card, of course, this is at the expense of the performance of the graphics card.

The normal is to clean the dust of the graphics card fan, if the effect is not obvious, either change the graphics card fan, or install the graphics card fan, or change the graphics card heatsink and a set of fans for a better one, if you have the ability to impose the graphics card fan is the cheapest. The effect of changing the fan of the graphics card is not obvious, unless the original fan is completely broken, the effect of changing the heat sink of the entire graphics card is more obvious, but ** is the highest. There is also a situation that is whether it is possible that your temperature measurement software is not accurate.

Or is the temperature measurement and control of the graphics card broken? If so, how many degrees of software testing there are, but in fact there are not so many degrees. I used to have a motherboard showing the motherboard temperature of 98 degrees, the CPU 16 degrees, it was normal to use, and then I changed the motherboard, and the temperature all changed, the motherboard was 38 degrees, and the CPU was 36 degrees.

So don't trust the measured temperature too much. Usually do more sanitation and cleaning, the computer is easy to use.

Judging from your question, the driver of the graphics card is a bit old, you can reinstall a driver to try. You can also add a fan to the graphics card, it's common to add a fan to the graphics card now, it's summer, and it's normal for the temperature to be a little high.

Cooling method within 100, smearing silicone, ** some are sold, I won't explain it, and installing a fan is also a good method.

Cooling method within 500, rebuy the graphics card, a bit of a luxury, buy the kind with two fans.

1 yuan hour method, stay in the air-conditioned room, the graphics card can basically work between 65 and 75.

As for water cooling, I smiled and said nothing, a set of professional water cooling** is conservatively estimated at 500 yuan, it is really better to change the graphics card.

Clean up the dust in the air duct of the graphics card. If not, add a fan to the case. If it doesn't work, modify the graphics card and cool it with water.