The CPU temperature is too high

The speed prompt of the fan is an illusion, and the CPU temperature prompt just explains the reason for the automatic shutdown, the temperature is too high, but it is lucky not to burn the CPU, the fan problem is the key, and then the problem of the contact surface between the heatsink and the CPU, the two problems need to be solved at the same time.

1. First of all, see if the fan is stuck and does not rotate, if so, replace it.

2. If 1 removes the fan normally, pull out the heat sink, find a repair shop to buy silicone, apply it and then install it.

3. If it still doesn't work, find a repair shop and check the power supply to see if the current supplying power to the CPU is too large.

4. If the power supply is normal, try changing the CPU.

5. In addition, the software problem is not big, it will not run the CPU to 100 degrees, and the software problem will only make the computer crash or blue screen state, but only break the program and cause a dead loop.

Take off the fan first and clean it thoroughly, see if there is still silicone, if not, 5 pieces a bottle, enough for you to apply 10 times. Then install the fan, see if the fan is running normally, whether there will be a pause, if it is normal, change the fan! The heat of the P4 is too high, so change to a better fan, and then add a case fan.

It's not necessarily a fan problem, you can find some thermal grease to apply to the CPU, and then install the fan. This can ensure that the CPU and the fan are in better contact, and the heat dissipation performance will be better If adding silicone grease can't solve the problem, then replace the fan

You first open your case to see if your CPU fan is rotating normally in use on the computer, your temperature is so high that it is likely that the fan is not spinning!

Is it bad for the fan to come into contact with the CPU? Take it off and clean it, apply some silicone, and put it back on. It should be fine.

1；Check the virus and look at the system process, whether the program from an unknown source is running for a long time, causing the CPU temperature to rise.

2: Check whether the CPU fan is normal, whether the contact surface with the CPU is normal, and whether the fan buckle is loose!

3: The silicone is dry or too thick

Is there no silicone between the CPU and the CPU fan?

You can go and buy a bag, about 10 yuan. Or ask for a bag as a gift.

Replace the radiator and fan. See if there's that glue for the heatsink and CPU. See if the tag on the CPU hasn't been taken down.

There are two possibilities for a high CPU temperature.

1--Poor heat dissipation effect, (this is a relatively common phenomenon, the solution: replacing the CPU fan and adding thermal grease can generally solve it).

2--- CPU itself is very hot (I have encountered AMD CPU twice in actual maintenance, the problem of the CPU itself, as soon as it is turned on, Master Lu detects the CPU temperature of about 60 degrees, and it is close to 70 degrees when you open a web page, and the temperature soars to about 90 degrees as soon as you open the game, and then it automatically shuts down, and the problem is still the same when the cooling fan is changed, and finally the CPU temperature is normal, so far the problem has been solved)!

In addition, the time to return to the factory for repair is relatively long, generally it takes half a month to 1 month, and the longest one took me two months to repair the motherboard!

MSI's motherboard is still relatively good, so I judge that the chance of a problem with the motherboard is not very high, and it may be a problem with the CPU itself

Motherboard warranty generally takes 2 weeks.

AMD is already hot! This is caused by the high ambient temperature in summer! Motherboard repair rarely has a broken motherboard! Generally, it is good to use gas to flush it after it is in the dust!

This boss is playing a trick on you.

Usually the reasons for the occurrence of high CPU temperature are:

1.The chassis itself is not well designed.

2.The internal wiring of the chassis is unreasonable, and the wires are too messy and too many.

3.Heat dissipation devices, such as good fans, large air volume, water cooling, etc.

manufacturing process.

Overclocking so that it exceeds its normal capacity, the heat generation scale rises.

6.The chipset of the motherboard is also relevant.

Please check them one by one, and of course what I said upstairs does not rule out the detection of software test errors.

When the CPU temperature is too high, it is usually accompanied by high CPU usage, sluggish system, and stuck programs. If it occurs, it is not a detection software error. If not, it may be a false alarm in the detection software.

It's not a motherboard problem, it's a CPU problem, put your CPU to another computer test, if it's still like this, the CPU has to be replaced, what about seven or eight of these CPUs on my side, the temperature is sixty or seventy as soon as it is turned on, how to measure it, it's the CPU reason.

In fact, as long as it doesn't crash, it's fine, the temperature is too high, it means that your computer has been used for a long time, the fan is aging, and you will have to change to a new computer in the future.

Overclocking? Or is there a problem with the radiator?

Pentium CPU remember to lower the octave when increasing the main frequency and overclocking. If the heatsink doesn't work well, try not to overclock it.

Clean up the dust first, and then change the fan after it doesn't work, and you can solve the problem.

My CPU is 80 degrees, and when I went to repair the computer, I saw that the fan was broken, and it took two days to get the computer to replace the fan, and why is that? 200 yuan.

If heat dissipation doesn't work, change to a heat pipe radiator.

The CPU fan doesn't work, change to a good one.

Maybe the heat dissipation is not good. The fan is still running.