What should I do if I reinstall the system and the M2 SSD is not recognized

The interface is an SSD, which is currently the fastest SSD. It is rarely used because there are not many motherboards that support this interface.

1. The interface is the second-generation mSATA interface, which used to be called NGFF and is now uniformly called.

2. The bandwidth of the interface is 10GB S or 32GB S, which is far more than the 6GB S of SATA3. It is the hard disk transmission interface with the largest bandwidth at present.

3. The interface is only natively supported from Intel's 9 series motherboards, so it is a relatively new interface, and there are fewer motherboards supported, and it is much more expensive than SATA3's SSD, so it is not common.

There are several reasons why the M2 SSD cannot enter the system after installation:

1. The SSD is not set as the first boot disk: After cloning the system to the SSD, if you can't enter the system when you start the computer, you may have forgotten to change the boot order. In this case, simply go to the BIOS and change the boot order so that the computer starts up from the SSD.

2. The hard disk partition mode does not match the boot mode: there are two types of hard disk partition formats: MBR and GPT. The boot mode of the MBR format should be Legacy; The boot mode corresponding to GPT is UEFI.

If the hard drive partition mode does not match the boot mode, the system will not boot. You also need to go into the BIOS and set the correct boot mode according to the hard disk partition.

3. The main partition is not set to the active partition: the active partition in the hard disk is the main partition, and the boot files of the computer operating system are all in the main partition, and they are all started from this partition when the computer is started. If you do not set the system partition as the active partition, you cannot enter the system, and you can modify the active partition from the command line.

4. A black screen appears after starting the computer: the computer will read the boot from the MBR DBR hard disk when it is booted, if the boot is damaged, the computer may be turned on with a black screen and cannot enter the system.

5. Error code is displayed after starting the computer: The error code is displayed 0xc000000f it may be due to the damage or loss of BCD files. BCD is a database of configuration options and is used when bootstrapping configuration.

If you can't find your BCD when you start your computer, you won't be able to access the system. <>

1. Enter the Windows PE system, check what partition mode your computer's hard disk partition is used, generally reinstall Windows 10 or Windows 8 system will use GPT partition, and the corresponding BIOS boot mode is UEFI. Reinstalling Windows 7 and XP systems uses the MBR partition and BIOS legacy mode. 2. After booting, quickly press ESC, F2, F12 and other shortcut keys to enter the BIOS, and in the BIOS, you can switch the boot type of the computer motherboard in the boot option.

Please select the corresponding BIOS boot mode according to the type of partition on your computer's hard drive. 3. Generally, there is a secure boot in the BIOS, it is recommended to disable it directly to avoid detecting the Windows system and causing the computer to fail to boot. Of course, there are some users because the system has not been installed successfully, or they are using a ghost system image, generally this kind of recommendation is that you **Xiaobai one-click reinstall the system software, which provides the official original Windows system, which can basically be installed directly.

The problem may be caused by not assigning a drive letter, and you can solve the problem by adding a drive letter by following the following steps:

<>5. Select the drive letter you want to assign and click the OK button.

6. The hard disk can be displayed normally on the computer, and it is done.

Summary. If the computer does not recognize the SSD after installing it, it may be due to the following reasons:1

Incorrect BIOS settings: Before installing the SSD, the slot needs to be enabled in the BIOS, otherwise the computer will not recognize the drive. You need to go into the BIOS settings, find the storage option, and then enable the slot.

2.SSD not plugged in: It may be that the SSD is not plugged in properly and needs to be re-seated to ensure that the socket contacts well.

After installing the M2 SSD, the computer did not recognize it.

If the computer does not recognize the SSD after installing it, it may be due to the following reasons:1Incorrect BIOS settings:

Before installing an SSD, you need to enable the slot in the BIOS, otherwise the computer will not recognize the drive. You need to go into the BIOS settings, find the storage option, and then enable the slot. 2.

SSD is not plugged in: It may be that the SSD is not plugged in properly and needs to be re-inserted to ensure that the socket is in contact with Hogen's good crack.

Can you tell us more about that?

3.SSD damage: If the SSD itself is damaged or there is a problem with the interface, it can also cause the computer to be unable to recognize it.

A new SSD will need to be replaced. 4.Incorrect driver:

In some cases, you need to install a specific driver which scumbag program is required to make the computer recognize the SSD, you can go to the official **** latest driver of the hard drive manufacturer. If the above methods do not solve the problem, it is recommended to contact the technical support of the hard disk stool maker or the technical support of the computer manufacturer for diagnosis and repair.