The computer resolution input format is not supported

Friend's laptop, installed is windows10 system, due to improper resolution setting, resulting in a black screen of the display when booting up, displayed on the screen: input is not supported, can not enter the system desktop. How do I set the resolution?

How do I solve the problem that the monitor input is not supported due to the wrong resolution setting?

Tools Raw materials.

Hardware: Computer Operating System: Windows10

Method steps.

1 12 Step by Step Reading.

Win10 system resolution setting and setting error caused by the display input does not support the problem.

Windows 10 system resolution settings.

Click [Start] in the lower left corner of the system desktop, click [Settings] in the start menu, and in the Windows Settings window, we click: System - Display, Notifications, Power;

In the display settings window, we see:

Orientation: Landscape.

Both of these are adjustable.

Regarding resolution, if there are no special cases, we generally use the recommended resolution, such as 1920 x 1080 above, and the orientation should be mostly landscape.

The solution to the problem that the monitor input is not supported due to the wrong resolution setting of the win10 system.

The resolution of my friend's notebook does not use the recommended resolution, it is set to 1920 x 1200, and after restarting, the screen displays: Input is not supported, cannot enter the system desktop.

Solution: Start the computer, when the icon and a few dots are displayed on the screen, press the power button on the computer, and repeat the operation until the "Choose an option" window appears;

In the [Choose an option] window that opens, we click: Troubleshoot - Reset your computer or view advanced options;

In the troubleshooting window, click: Advanced Options to open the Advanced Options window;

In the Advanced Options window, we click again: Startup Settings - Change Windows Startup Behavior;

In the launch settings window we can see that there are:

Enable debug mode.

After the computer restarts, enter the startup settings window, and we see: 3) Enable low resolution**, press the function key "F3" or the number "3" on the keyboard to enable low resolution**;

1.Right-click on an empty space on the desktop (right-click).

2.Point screen resolution (third-to-last row).

3.The resolution is changed to your monitor (enter your monitor model to check the best resolution) Note: I can't check or can't find 19 inches to 1440 90022 inches to 1680 1050

Computer screen display input is not supported because you have adjusted the screen rate of the computer console.

Some monitors don't know this resolution, and the input will cause the display "Input not supported".

In this case, you should reset the resolution as follows:

1. Right-click on the computer desktop and select "Screen Resolution".

2. Select the appropriate screen resolution that can be supported.

What to do if the computer screen shows that the input is not supported.

Computer screen display input is not supported because you have adjusted the screen rate of the computer console. Some monitors don't know this resolution, and the input will cause the display "Input not supported". In this case, you should reset the resolution as follows:

1. Right-click on the computer desktop and select "Screen Resolution" 2. Select the appropriate screen resolution that can be supported. Extended Information: A display is also commonly referred to as a monitor.

A monitor is an IO device that belongs to a computer, i.e., an input and output device. It is a display tool that displays a certain electronic file on the screen through a specific transmission device and then reflects it to the human eye. Fault maintenance computer monitor failure is divided into soft fault and hard fault, when the display can not be displayed normally, should be a simple analysis, the fault is in the **, is the software setting problem or the internal circuit of the monitor is broken, and then determine whether it needs to be repaired.

According to the fault classification of the display, there are the following fault phenomena: black screenWhen the computer is turned on, no image appears after a few minutes. At this time, you should first check whether the power indicator on the monitor panel is on.

If not, check whether the power plug of the monitor is properly connected. If the power cord is plugged in well (to ensure that the power socket is electrified, you can change a jack to try), and the power switch is on, but the display indicator is not on, this means that the internal circuit of the monitor is faulty, and it should be sent to a special maintenance department for repair. If the power indicator of the monitor is on, you should restart the computer and pay attention to whether the indicator light of the main unit is shining and whether there is a "beep" sound in the main unit.

If so, the computer has started up normally. At this time, you should check whether the signal cable connection between the monitor and the host is normal, whether the 15-pin D-shaped plug connected to the host is loose, and whether the needle in the plug is broken, crooked, short, etc. If the connection is normal, it means that there is a fault inside the monitor and it should be sent for repair.

The energy-saving display will automatically work in the corresponding state and mode according to the line field synchronization signal sent by the main unit, and the indicator light on the panel will indicate the corresponding status at the same time. Usually flashes orange for shutdown or sleep, orange for hanging, yellow for waiting, and green for normal display. When the monitor screen is black, after careful inspection, it is not the fault of the host, it is best not to power on the monitor continuously or for a long time, so as not to expand the fault.

In daily life, sometimes we use the computer will encounter the problem that the computer display input is not supported, but some users do not know how to do it, how to solve the problem that the computer display input does not support? Here's a list of steps I've collected to solve the problem of unsupported computer display input, I hope it will be helpful to you.

1. Start the computer in the shutdown state, and then press and hold the power button to force the shutdown when the small circle scrolls in win10;

2. After repeating the above operations 2 to 3 times, the system will appear "Select an option" interface;

3Click on the "Troubleshoot" option in it and select "Advanced Options" in the new interface;

4. Click "Startup Settings" in the advanced options;

Hello dear! It's a pleasure to serve you. This is caused by the system resolution does not match your screen resolution, you can press [F8] when the system starts, enable the low-resolution mode in the system's advanced Qingliang menu, and re-adjust the screen resolution to the recommended after entering the system Yulukuan.

The following is the detailed introduction: 1. The reason why the display input is not supported may be due to the fact that you have adjusted the [screen resolution] of the host; You can press [F8] to enter the system's advanced menu when the computer is turned on; 2. Select [Enable Low Resolution**], after restarting the system, right-click on the desktop to open [Screen Resolution] and adjust the screen resolution to the recommended; Then restart the system normally. I hope mine can help you, please help me like it, I wish you a happy life.