AirPods have no sound in one ear

AirPods have no sound, you can try to re-pair. Open the [Bluetooth] option in the [Settings] of the phone, see the AirPods device select [Ignore this device], re-pair the phone to check if there is any sound, you can also put the two earphones back into the box and cover them, open the cover and reconnect the phone. If it is no longer recognized, the hardware may be damaged.

The specific steps are as follows:

1. Tap the [Settings] - [Bluetooth] option on your phone, find your AirPods, tap the [i] button on the right, and then select [Forget This Device] to pair your AirPods with your iPhone again; You can also put it back into the box and close the lid, and it will automatically reconnect the phone when the lid is opened;

2. You can also open [Settings] - [General] - [Accessibility] to find the [Adjust the volume balance of the left and right channels] control bar to ensure its position in the middle;

3. If you find that the earphones without sound cannot be recognized by the iPhone, it may be due to hardware failure;

4. You can also try to update your iPhone to the latest system version;

5. Or use the elimination method to try to pair with other iPhones;

6. If you still can't make a sound, you can only go to the after-sales maintenance point for maintenance. Apple's repair strategy for AirPods is to replace the damaged parts of the earbuds separately, and provide proof of purchase to an Apple Store or Apple authorized service provider for warranty or paid repair.

Put both earphones into the box first.

2.Tap into Bluetooth on your phone and tap the blue exclamation mark on the right side of the AirPods device to ignore the device.

3.Wait a minute.

4.Press and hold the physical key on the case with the lid open until it changes from green, white, amber, flashing, white, and white to white.

5.Connect the headphones to the mobile phone, click Finish after 30s, and then take out the headphones to listen to whether there is any sound.

The colloquial language has been revised, and this process should be successful.

There may be several reasons for this.

First, whether I have fallen or not, I have fallen one before and there is no sound.

Second, if you adjust the volume too low, although the probability is very low, there is also a possibility of making mistakes.

Third, whether it is soaked in water, it will also lead to no sound If it is watered, it is recommended to put it in rice to dry or blow it with a hair dryer.

This problem is caused by the AirPods setting up the one-ear mode, which can be solved after re-correction. Take the Apple 8 as an example, the steps are as follows:

1. Open the phone's settings window directly and select Bluetooth to enter.

2. Next, you need to find the object and click Jump.

3. At this time, continue to browse the left and right menus there.

4. If there is no problem, determine the mode according to the actual situation.

5. In this way, the relevant results will be found, and the requirements can be realized.

Hello, please set it up according to the following operations,1Tap the [Settings] - [Bluetooth] option on your phone, find your AirPods, tap the [i] button on the right, and then select [Forget This Device] to pair AirPods with your iPhone again; It can also be reinserted into the box and closed with the lid to automatically reconnect when the lid is opened. 2.

You can also open [Settings] - [General] - [Accessibility] and find the [Adjust the volume balance of the left and right channels] control bar to ensure its position in the middle; 3.If you find that the earphones without sound are not recognized by the iPhone, it may be due to a hardware malfunction; 4.You can also try updating your iPhone to the latest system version;

Here's why AirPods have no sound in one ear:

1. If the Bluetooth connection is faulty, you need to disconnect the Bluetooth and reconnect.

2. When the power of the headphones without mold and sound is exhausted, you can fully charge the two earphones at this time.

3. The Bluetooth headset motherboard is faulty, there are problems such as poor contact, which is a hardware failure and needs to be repaired.

4. Connecting too many devices, such as iPhone, iPad or Mac, causes AirPods to not switch back when switching. It is advisable to reduce the number of connected devices.

How to care for your AirPods1. Use a dry, lint-free soft cloth for cleaning.

2. Make sure not to spill any liquid into the opening.

3. Clean the microphone and speaker grille with a dry cotton swab. Use a small, clean, dry, soft-bristled brush to remove any debris from the grille.

4. Do not use sharp objects or abrasive materials to clean AirPods or EarPods.

The bug problem caused by Bluetooth, connecting too many devices, such as iPhone, iPad or Mac, causes AirPods to not switch back when switching, AirPods failure, usually AirPods failure has to be directly sent for repair to be solved.

1. Clean AirPods: AirPods will be stuck with a bunch of dirt after using them for a long time, it is recommended to take a toothbrush or cotton cloth that you don't use to clean them, and clean the charging position under the left and right ears of AirPods and the charging case once, try it.

2. Take it down and put it on again: first take out the left and right ears of the airpods from the ears, confirm whether there is an automatic pause, turn off the Bluetooth and turn it on again, and put the left and right ears of the airpods on again It will be normal**.

4. Re-pairing: If the AirPods are connecting to Mac or Apple TV, switch back to the iOS device and re-pair the AirPods once. To confirm whether the AirPods have enough power, you can open the charging case, and iOS will automatically pop up the current charging case and earbuds power, if it shows a red no power status, it is out of power!

5. Send for repair: If the above methods are tried, there is still no solution, and finally you can only send it for repair.

The above content refers to Encyclopedia-airpods

It's because only one earphone is connected, then you can reconnect the airpods, and the solution is as follows:

1. First open your phone's settings and tap on the Bluetooth option.

2. Find the connected AirPods and tap the blue button on the right.

3. Click "Ignore this device" above, as shown in the image below.

4. Then put the AirPods back into the charging case, open the charging case and close to the phone, the phone will pop up.

5. Click "Connect via iCloud". The connection is successful, and the problem that one earphone of AirPods cannot be connected solves the problem.

Precautions

1. Be sure to turn off the volume before use. If the volume of your output device is too loud, it will not only rattle the ears, but also light the diaphragm folds. The heavier ones burned the voice coil of the headphones.

2. Keep the earphones away from strong magnets. The magnetism of the unit will decrease, and the sensitivity will decrease over time!

3. Keep the earphones away from moisture. The pads inside the headphone unit will rust, the resistance will increase, and your headphones will be biased.

4. a plug part. Some friends like to put *** or something in their trouser pockets, and the plug outlet part is easy to break, and the thread will break after a long time.

Possible Causes:

There is no exact reason for the lack of sound on the AirPods, and the only thing that can explain this phenomenon is the Bluetooth connection problem.

Solution. 1. Put both AirPods into the charging case and make sure both AirPods are charging, then reset your AirPods Pro: Go to "Settings" > "Bluetooth", tap the "i" icon next to the AirPods, and then tap "Forget this device" to confirm.

2. Put the two AirPods into the charging case, close the lid and wait for 30 seconds, then open the lid.

3. Press and hold the setting button for a few seconds until the status indicator flashes white.

4. Hold the AirPods close to the device, open the lid and reconnect the AirPods, and follow the steps on the device screen.

1.Tap the [Settings] - [Bluetooth] option on your phone, find your AirPods, tap the [i] button on the right, and then select.

2.You can also open [Settings] - [General] - [Accessibility], find the [Adjust the volume balance of the left and right channels] control bar, and make sure that it is.

3.If you find that the earphones without sound are not recognized by the iPhone, it may be due to a hardware malfunction;

4.You can also try updating your iPhone to the latest system version;

5.Or use the elimination method to try to pair with other iPhones;

This new wireless earbud has a built-in optical sensor as well as an accelerometer. Double-tap this wireless earbud to connect to Siri. During the user's play, this headset can also filter out noise and ensure sound quality.

2. Put it in the box and try to erase the Bluetooth to delete the connection 3. Shut down and restart.

1.Make sure the charging case is fully charged.

2.Place both AirPods in the charging case and charge them for 30 seconds.

3.Open the charging case near your iPhone or iPad.

4.Check the charging status on your iPhone or iPad to make sure every AirPod is charging. <>

5.Tuck both Nakayama AirPods into your ears.

7.If one side of your AirPod still isn't working, reset your AirPods

Learn more about what to do if the left or mega brightness of the right AirPod can't be used properly.

1.Make sure the charging case is fully charged.

2.Place both AirPods in the charging case and charge them for 30 seconds.

3.Open the charging case near your iPhone or iPad.

4.Check the charging status on your iPhone or iPad to make sure every AirPod is charging. <>

5.Tuck both Nakayama AirPods into your ears.

7.If one side of your AirPod still isn't working, reset your AirPods

Learn more about what to do if the left or mega brightness of the right AirPod can't be used properly.