What s going on with the black screen of the reversing image, what s going on with the black screen

The phenomenon of black screen in the reversing image is likely to be due to poor line contact, and it is necessary to check the wiring between the line and the vehicle installation in time to see if there is a false connection. If there is, it will naturally lead to the situation that the reversing image is not working at any time, and even a direct black screen is possible, at this time, as long as the virtual part is connected well. Of course, it may also be because the power cord is aging, you can try to replace it with a new power cord, if the black screen can be solved, it means that there is indeed a problem with the power cord.

The image appears black, this may be a problem with the line, you had better go to the after-sales service to take a look, repair it will be very good.

Hello friend, the reversing image is black, it may be that there is a problem with your line or a problem with the monitor, you can find a professional to check it.

If you say that your reversing image is black, it should be that the camera at the rear of your car is damaged, or that your trunk is open, so you can't see your reversing image.

The problem is that he must have a short circuit, or something like the one inside, and you have to find a professional car repair place to fix it for you.

The landlord checks whether the power supply of the camera is not in good contact, because the camera will not all be broken together. If the same power supply is used, all cameras will not work. There is also whether the ** line on the screen is loose.

When there is a problem with the reversing image, such as a black screen or a blue screen, it needs to be repaired and replaced in time, so as not to affect the normal use of the reversing system and cause potential safety hazards to the car. Generally, it is unusable because of line problems or poor contact, and it can be repaired in time.

Precautions for reversing.

The position of the yellow line is about a meter from the rear of the car, of course, there may be slight differences between this data and the reversing image. When there is an obstacle in the yellow line area, if your car is equipped with a reversing radar, the radar has begun to sound, and you should be careful if you continue to reverse.

The location of the red line is the closest to the rear of the car, only about a meter, if you observe an obstacle in this area from the image when reversing, you should be more cautious at this time, and you will soon hit the obstacle. Because the distance of meters is very close, if it is a car with a manual transmission, the clutch will hit the obstacle behind it if it is not well controlled at that moment.

You can first check whether the wiring harness of the reversing image is broken. At the same time, check whether the connection between the plugs of the reversing image is normal, and whether there is any loose and virtual connection of the wiring harness plug. If you are sure that there is no problem with the wiring harness of the reversing camera, it is likely that the camera of the reversing camera is malfunctioning.

Pro, it may be due to the following reasons: 1. The data cable connected to the reversing camera falls off or has poor contact. 2. The reversing camera is damaged.

3. Failure of gear sensor. Reversing image is also known as parking assistance system, or reversing visual system, vehicle monitoring system, etc. The system makes the situation behind the car more intuitive and clear when reversing, and is one of the most practical configurations for reversing safety.

1.The camera is faulty, there is a problem with the camera, the device inside is broken, you can buy a new one, pay attention to the purchase of the lighting power supply must be bought when buying, so that you can also see it at night.

2.The power supply is dropped, and the power supply to the camera is loose or falls off, so you only need to plug the power supply inside and plug it in tightly.

3.If the wire is broken, the entire section of the line from the camera to the camera power supply should be carefully checked, and there should be no dead ends.

4.The camera is blocked, which is usually stuffed with dirt or gum by some bear kids, and there is no other way but to clean it up.

5.When cleaning up, use some alcohol or the like to dissolve the dirt, and be careful to be gentle, otherwise the camera will not be clear if it is scratched.

The screen is completely black and does not turn on.

First of all, check whether the original car insurance of the car has a fuse, if the insurance bursts, you can replace it. Check whether the navigation buttons are stuck, including the rset button, which will also cause the computer not to boot. Secondly, if you have strong hands-on ability, you can remove the navigation, check whether the navigation tail insurance is fused, and if it is fused, replace it.

Again, if the screen is still black and does not turn on, use a multimeter to measure whether the B+ and ACC voltages are normal (12V), if the voltage is normal, it is the internal fault of the machine that needs to be opened for maintenance.

Black screen but normal sound.

Switch to a familiar interface, tap the touch screen with your hand, see if the touch responds, if the touch is normal, then find the problem of displaying the inner screen separately, whether the LCD screen is damaged? Is the LCD lamp driver normal? Is the signal part of the circuit normal?

Is the display decoding normal? Is the core module working? If the touch is not normal, the first suspicion is that the touch screen is broken, and if it is broken, replace it.

Then check the touch circuit and confirm that the wiring part is okay. In general, the decoding chip or core module is not working or damaged.

Reasons for navigating the blue screen of the reversing image:

1. Occasional failure, software failure, turn off, pull out the navigation card, reinsert the hundred, and then start and return the finger momentum to try. Circuit failure, check the circuit The connector between the main unit and the camera is loose, the circuit switch is in poor contact, etc.

2. Frequent failures, software failures, go to the 4S station or ask the navigation after-sales software to brush the software.

3. Serious failures, cameras, navigator chips, PCB boards, etc., damage, virtual soldering, chip tube burnout, etc., need to be repaired and replaced by a professional after-sales office.

Hope mine is helpful to you, hope, thank you!

The current mammoth with a black screen in the reversing image is likely to be due to poor line contact, and it is necessary to check the wiring between the line and the vehicle installation in time to see if there is a false connection. If there is, it will naturally lead to the situation that the reversing image makes the staring vertical work when it is not effective, and even the direct black screen is possible, as long as the virtual part of the tank is connected intact at this time. Of course, it may also be because the ** power cord is aging, you can try to replace it with a new one.

It may be that the line contact of your reversing image Bishan Cave is poor, or it may be that the line is aging, the reversing image has been used for a long time, the light sensitivity effect of the chip has deteriorated, and the reversing image has some faults or the camera is blocked.

1.Under normal circumstances, when the mobile phone stores too many things, many friends can feel that the mobile phone is running too slowly, and when their mobile phone is occupied by 80% of the memory that can be driven, a black screen of death may occur.

2.This is the loosening of the contact of the mobile phone screen, which is not a big problem, but it can directly cause the black screen of the mobile phone, and it is difficult to find that it has to go through a lot of tests to find, which is generally caused by the mobile phone being bumped.

3.It is common for many mobile phones to have a black screen after using it for a long time, the main reason is that the effective use time of the mobile phone battery is 1 year, or it is three years but there is a problem in one year, and excessive use leads to the aging of the mobile phone's battery and insufficient voltage.

4.There are a lot of applications for smartphones nowadays, but there are some software that are inherently conflicting, which can also lead to a black screen, so the black screen after installing a lot of software is basically this reason.

5.Many people are keen to flash the machine and use a better system, in fact, some system mobile phones are not very supportive, and some are not complete, resulting in a black screen when using it in the future.

There are a variety of reasons:1. There is a problem with the start switch of the reversing image.

2. The camera of the reversing image is damaged.

3. The screen of the on-board central control system is damaged.

4. There is a problem with the connection between the reversing camera and the line.

5. The line of the reversing image is damaged. The camera needs to be replaced in a replacement way.

Notes:The reversing image of the motor vehicle can help the driver of the motor vehicle to start the mountain brigade, and will automatically start to the camera behind the car when the reverse gear is hung up, and the town oak can pass the central control screen of the motor vehicle ** to the specific situation of the rear of the vehicle, and when the motor vehicle driver reverses, it can be a good grasp of the rear information.

1. The camera is damaged, when the camera is damaged, the video cooker and image can not be uploaded to the computer, and naturally it cannot be displayed, it is recommended to go to the 4S shop to repair, if necessary, replace a new camera.

2. The display screen is damaged, if the display screen has been in a black state, can not be started or has a flower screen, it is usually caused by the damage of the key trace display, it is recommended to go to the 4S store for inspection and repair.

3. Poor wire contact, if you often drive on bumpy or rotten roads, it is easy to make the wires in the car fall off or loosen. When the wire contact is poor, the image of the camera cannot be transmitted to the main unit, and the reversing image will not be displayed, and the center control panel needs to be removed for detailed inspection.

4. If there is no electricity, if the car is in a state of turning off, it is easy to use more ** or lights for a long time, and it is easy to lose power from the battery.

Hello! The black screen of the reversing image usually fails because the large screen itself asks the group question.

There are two situations: first, the large screen can be displayed normally without hanging the reverse gear, and if the screen is black when the reverse gear is hung, it is a problem with the reversing image display or the rear camera.

Second, the large screen can never be opened, so the reason is the problem of the big screen itself, the failure of the insurance or wiring harness, the failure of the large screen computer board, and the failure of the computer to be upgraded.

When the reversing code shouting image appears black, the first thing to consider is to check whether the camera is damaged or covered by debris. Since cameras are usually installed next to license plate lights, they can be covered with splashed mud and sewage when driving on muddy roads. It can be scrubbed with alcohol, etc.

Secondly, we consider poor line contact, which is also the most common reason for inverting an image with a black screen. At this time, we need to check the connection between the line and the vehicle to see if there is any looseness. If this is the case, it will naturally lead to poor contact and render the reversing image ineffective.

You can even go black directly, at this time, just connect the loose parts. Of course, if the vehicle is used for a long time, it may also be caused by the aging of the power cord. You can try getting a new power cord. If the screen returns to normal, there is a problem with the power cord.

Notes:

The reversing camera system makes it possible to see clearly through infrared rays even at night. The anti-magnetic, shock-proof, waterproof and dust-proof performance of professional vehicle-mounted probes has been further improved. The on-board display adopts TFT true color, which has been treated with anti-magnetic treatment, no signal interference, and no flicker.

The instrument panel and endoscope display can clearly display the information behind the rear of the vehicle through the on-board camera. It is also possible to install two reversing rearview cameras at the same time to achieve no blind spots when reversing.