What should I pay attention to in the renovation of old house heating?

Home decoration, first of all, is roughly divided into old house decoration, and secondly, new house decoration. There is a difference between the two decorations. It may be that the old house decoration needs to retain the original east and west fire design, and the new house decoration, new design, new creation. Here I will tell you about the renovation of radiators for home improvement.

Radiator renovation and installation are generally in the northern region. So what do you need to know about the transformation of radiators, let's follow the golden flagship Brother Qi to find out.

Clause. First, the installation position of the radiator.

How can the radiator achieve the best heating effect and be beautiful? Although the new radiator is very adaptable and can be placed in any corner of the room, in order to obtain the best heating effect, it should still be placed under the window and other places with strong "cold radiation", and its principle is to heat the cold air entering the house first. If your home has floor-to-ceiling windows, place the heating on the side walls of the floor-to-ceiling windows.

Clause. 2. Pipeline modifications.

Aluminum-plastic pipes are the first choice, and some consumers find the original iron pipes unsightly and plan to replace them with the heating. If you have such a plan, you can buy beautiful and good quality aluminum-plastic pipes to replace the original heating pipes. At present, there is a new type of pipe on the market with a stainless steel appearance, which can also be used with a new type of steel heating.

Clause. 3. Replacement construction.

In the construction of replacing radiators, it is necessary to pay attention to the places where there are no water leaks. In general construction, workers will reserve valves on the pipes when replacing radiators. After the installation is completed, it must be tested by stamping to prove that there is no place for running and dripping, and then it can be connected to the original heating pipe.

Due to the difficulty of construction, it is best not to change the position of the heating riser. Because of this, the workers have to go to the neighbor's house for construction, which is very inconvenient. So at this stage, safe containment is key.

Clause. Fourth, the first factor.

The new type of radiator is expensive, with an average of 50 yuan to 200 yuan per piece. If you replace all the 6 sets of radiators (including bathrooms) in a set of 3 bedrooms and 2 living rooms, it will cost about 2,000 yuan to 5,000 yuan. Therefore, it is best to minimize the number of radiators without affecting the indoor heating effect in order to achieve the best "performance** ratio".

So try to live within your means to save the most money.

If it is said that the old house is renovated and the radiator does not need to be replaced, the first three aspects need to be considered; For the decoration of a new house, these four points need to be paid attention to, and the design of the radiator must also be considered, that is, the location, number, style, and color of the radiator.

Old house, because the insulation performance has weakened, so, when installing radiators, you must choose a larger than the standard, for example, a radiator, the heating area is 12 square meters, if the old house is 12 square meters, you should choose a radiator with 16 square meters of heating, in addition, must be replaced with pipes.

1.Indoor sub-household renovationIn accordance with the principle of user voluntariness, the use of household transformation, the original system and the new system coexist.

This method of transformation is flexible and easy to control. Indoor radiators in old residential areas are generally installed in bedrooms and small halls, and kitchens and bathrooms are not heated. During the transformation, the number of radiators can be increased according to the user's requirements, and the independent circulation system of the user's room can be flexibly transformed, so that the upstairs and downstairs heating facilities will not be affected and the heating effect can be guaranteed.

2.Replace the radiator. The so-called radiator replacement is that in the process of radiator renovation in our old house, the connecting pipes of all radiators are not replaced, and only the radiators installed indoors are replaced.

Then at this time, you need to buy a radiator that is consistent with the original radiator. Because the way the radiators are connected also determines the way the pipes are arranged. For example, if it was originally for the next time, the newly bought radiator should also be used for the next time.

3.Try to choose a location where the radiator is original or nearby。The hanging radiator can be placed on the load-bearing wall, and the functional design of the general radiator is placed under the window, which can effectively prevent cold air from entering, and is also conducive to heat dissipation, so that the whole house is warm.

The radiator material should be suitable for the heating environment of the residential area. If the oxygen content in the heating water is high, a steel radiator or a copper-aluminum composite radiator with strong anti-corrosion performance should be used. In addition, users should purchase the same type of radiator at home to prevent potential corrosion in future use.

4.Heating system renovation requires the right construction time。In the case of central heating, the construction time should be considered.

If the construction is carried out during the heating period, it is easy to cause water leakage accidents, bring unnecessary losses to the family, and affect normal life. Generally speaking, heating retrofits are made during the non-heating period, that is, before heating. For homes with independent heating, the heating remodeling time is free.

It is recommended in the spring and summer seasons, because there are few installation users, and the decoration quality can be guaranteed.

5.After the heating renovation is completedIn the first heating period, we must ensure that there is a good space for heat dissipation around the radiator, so as to ensure our safety and health. At the same time, it is necessary to take care of the radiator heating facilities.

After all, it is a modified radiator, so that it can be checked regularly. Once the problem is found, it can be dealt with in time, and its service life can also be guaranteed.

First, the radiator should consider the water quality problem.

When re-selecting radiators for old houses, it is important to understand the water quality of the area where they are used. If the material of the radiator does not match the water quality in the community, it will not only greatly affect the heating problem of the radiator, so that users can not enjoy the warmth in winter; It will also affect the service life of the radiator to a large extent, and shorten the service life of the radiator to a large extent. So, how do we choose the material of the radiator?

Consumers can ask about the water quality of the property or the help of professionals to choose; There is also a more secure way, consumers can choose the same material as the previous radiator material, to ensure that nothing goes wrong.

Second, the radiator should match the overall home style.

The old house has been renovated and renovated with hard work, and the reinstalled radiator at this time naturally has to ensure its appearance. Here it is recommended that consumers choose steel radiators and cylindrical radiators in copper-aluminum composite radiators, which have a more colorful and generous appearance, which can echo with all home decoration styles and better highlight the user's taste.

3. Try not to change the position of the radiator.

Generally speaking, the installation of radiators will follow the principle of "low rather than high", so the place where it is installed for the first time is also carefully designed by professionals. If permitted, it is recommended that consumers do not change the previous position when reinstalling the radiator, so as to better ensure the heating of the radiator and reduce the phenomenon of water leakage, bursting, and uneven heating.

Fourth, the radiator should be accurate.

Since it is a redecoration, it is necessary to overcome the previous heating drawbacks, and when redecorating, it is necessary to choose a professional installation team to come to measure, formulate an accurate heating plan, and ensure that the heating temperature of each room reaches the ideal standard.

Start with radiators. Radiators can be installed in old houses, which is more convenient and cost-effective, and the requirements for house renovation are relatively small.

When renovating, it is necessary to install it close to the ground first, and try not to expose the radiator to the air, so that it will be more normal, and if it is installed close to the ground, it will not only make the old house hotter, but also be particularly convenient.

Before the renovation, it is necessary to fully accept the general condition of the house, clearly understand the structure, characteristics, age and existing problems of the house, measure the size of the house, detect the existing water and electricity projects in order to save time and costs for renovation.

It is better to choose the material.

Match the decoration of your own home.

Therefore, we must be extra careful in the selection of materials, which will also affect our future living comfort. And when choosing such things, you can also choose according to your personal decoration style, because the radiator must echo the overall color of the house, so that it will give people a very good feeling.

The most direct way is to replace the radiators, and the other is to install floor heating, but if the floor slabs are relatively thin, be careful not to leak into other people's homes. There are also retained original radiators and then renovated.

When renovating, we must pay attention to the laying of the line, and then the wall should also be opened, or the floor heating can be laid, so that it is more convenient and can also solve the problem of heating.

Move the old heater to a suitable location first, then check the main pipe, and install some PPR pipes. Be sure to design ahead of time and also buy new heating.

Nowadays many homes are installing radiators, especially in the cold northern ones. However, some houses are too dilapidated and need to be renovated and rebuilt, and the radiators installed in the old houses are not broken, so they must not be thrown away, so much waste and pollute the environment. At this time, you only need to give the radiator a small makeover.

Jin Jin today shares the methods and precautions for the use of radiators for renovating old houses. Let's follow Jin Jin to find out.

Methods of remodeling radiators in old houses.

Before disassembling and assembling the radiator, prepare a protective film to give comprehensive protection to the removed radiator to prevent damage from bumps.

This is also the initial protection of the radiator.

In order to prevent the radiator from not heating in the later stage.

Before the radiator is removed, the shut-off valve connected to the radiator needs to be sealed to prevent lime particles and wood chips from entering the main pipe, causing the main pipe to be blocked.

When the radiator is displaced, look at the pipes of the main pipe.

If it is a PP-R aluminum-plastic pipe, it should be connected near the main pipeline, and the branch pipe is too far, which will cause the heating to be not hot; If it is an aluminum-plastic composite pipe, if the pipe is not enough to shift the length, part of the main pipeline needs to be replaced, because there can be no interface underground; If the user chooses to add pipe fittings to the ground, it needs to be completed with the assistance of professional construction personnel.

When the radiator is moved away from the original place, it is necessary to pay attention not to injure other main pipes to avoid unnecessary economic losses. The heating pipe should not be installed with too many joints, which will increase the flow resistance of the system in the pipe, resulting in the hydraulic imbalance and poor flow of the heating system and causing the radiator to not be hot. After connecting the main pipeline, do a closed pressure test, the test pressure is times the working pressure, the test time is 30 minutes, and no leakage is qualified.

Precautions for radiator remodeling.

The installation position of the radiator should be selected as far as possible from the original or nearby location, the hanging radiator should be placed on the load-bearing wall, and the general radiator is placed under the window from the functional design, which can effectively prevent the cold air from entering, and can also be conducive to heat radiation, so that the whole house is hot.

The radiator material should be suitable for the heating environment of the community, if the oxygen content in the heating water is high, it is necessary to use a steel radiator with strong anti-corrosion performance, or a copper-aluminum composite radiator, and the user should buy the same type of radiator for the home to prevent potential corrosion in future use.

The radiator should be replaced by a professional installation company, and the pipe should be changed as little as possible in the process of alteration, so as to keep the pipe straight and reduce the elbow, otherwise the resistance is too great, which will easily lead to the obstruction of the water flow and affect the heating effect.

When buying radiators, don't be greedy for temporary convenience or cheap to buy products sold in the community, or buy small brands of radiators in small street stores, you should try to buy well-known brand radiators in large building materials markets or brand stores.

After the heating renovation is completed, the first heating period should ensure that there is a good heat dissipation space around the radiator, so as to ensure our safety and health. At the same time, it is necessary to take care of the radiator heating facilities, after all, it is a transformed radiator, so that it can be checked regularly, and the problem can be dealt with in a timely manner, and it can also ensure its service life.

With the increasing requirements of the home environment, many people want to renovate their old houses to improve comfort. Heating is a very important issue in the renovation of old houses. So how to renovate the old house heater? Here are a few common methods:

1.Installation of a central heating system.

When renovating an old house, installing a central heating system can replace the old heating. The implementation of this system requires the replacement of parts such as boilers, radiators and pipes, but it ensures a relatively uniform temperature throughout the room and improves comfort.

2.Install electric heaters.

Electric heaters are also a common option in the renovation of older homes, as they do not take up a lot of space compared to old stoves and do not affect air quality. The electric heater can be turned on or off at any time, and the bent burial can also be used more intelligently through intelligent control.

3.Install a wall-mounted water heater.

The advantages of wall-mounted water heater are small size, beautiful appearance, simple installation, and stable hot water. Heating can be achieved by installing hot water flakes to connect the heat source pipe to the radiator pipe.

4.Replace the old heater with a new radiator.

If the original heating barrel structure is old, and the pipe mouth is not in the right shape and cannot be installed, the radiator can be replaced to renovate the old house. The new radiators are powerful and simple, eliminating the need for a lot of installation steps.

In short, by renovating the heating of the old house in the above ways, it can not only increase the temperature, but also enhance the comfort and make the home warmer. However, before choosing a renovation plan, it is important to consider factors such as economic factors, space factors and the living environment.