Old Buick Kaiyue 1 8 automatic transmission, HOLD light keeps flashing, solve

Old Buick Kaiyue automatic transmission, the hold light has been flashing is to prompt the driver that the vehicle has turned on the auto hold function, and this function is working, this function is to reduce the fatigue of the driver stepping on the brakes, as long as the driver steps on the brakes to stop the vehicle, it will automatically enter the electronic braking state, and the specific operation steps to turn on the auto hold function are as follows:

1. Press the brake pedal of the Buick Excelle.

2. Press the one-button start button of Buick Excelle.

3. The instrument of Buick Kaiyue lights up, and the power supply of the whole car is turned on.

4. Press the Auto Hold button of Buick Excelle to turn on the automatic parking function.

5. At this time, the Buick Kaiyue does not need the driver to step on the brakes for a long time when waiting for the red light.

The HOLD button adjusts the best driving state according to different driving conditions, effectively prevents the transmission from shifting frequently on bad roads, and plays the role of forced downshift (no upshift) when overtaking. Press the HOLD button in D gear and the gearbox will remain in.

Second, third, and fourth gears (mainly fourth gear), press the hold button when you are in 3rd gear, and it will stay in.

In second and third gear (mainly in third gear), pressing the hold button in 2nd gear will keep it in second gear, and pressing the hold key in 1st gear will keep it in fixed first gear. Using this key will not cause damage to the transmission. It's the lock, you find the button and turn it off.

Send it to the 4S store, and the electronic limit report is faulty.

Try the hold button next to the gear first.

If it doesn't work, do it as follows: start and start one or two meters, brake and pull the handbrake, turn off the ignition, and then push the gear to P gear, wait for 10 seconds and then start. This can be repeated 2-3 times.

Summary. Hello, dear.

The holo light of this car is the transmission snow mode light, and the hold light is always on, which means that the transmission is in hold mode. At this time, you only need to press the HLOD button next to the gear mechanism again to release it.

If the HOLD light is flashing, it indicates that the transmission system is faulty, including the transmission and the transmission computer module. Go to 4S detection, and you will definitely be able to detect the fault. When the gearbox fails, it will enter the protection module, and when driving, there will definitely be a shaky phenomenon when shifting.

How to eliminate the flashing lights of the Buick Kaiyue hold.

Hello, the holo light of this car is the gearbox snow mode light, and the hold light is always on, which means that the gearbox is in hold mode. At this time, you only need to press the HLOD button next to the gear mechanism again to release it. If the HOLD light flashes, it indicates that the transmission system is faulty, including the transmission and the transmission computer module, which can be detected as faulty.

Go to 4S detection, and you will definitely be able to detect the fault. When the gearbox fails, it will enter the protection module, and when driving, there will definitely be a shaky phenomenon when shifting. Spring and.

I hope mine is helpful to you, please give me a thumbs up if you can! Have a great day!

Summary. If this light keeps flashing, it means that there is a problem with the handbrake system of his car. Because he is a mechanical handbrake, and the light keeps flashing, it means that there is a control switch of this handbrake light on the manipulator, and it may be that there is a problem with the control switch of the handbrake light below him.

Or if there is a problem with the line, you can mainly check these two locations. There is also a need to check this body control module, and it will also be seen that the following lines and body control modules are connected, and these aspects need to be checked.

Buick Excelle car, I don't know how the lights keep flashing, do you know?

Hello, I'm helping you sort out the answers to your questions, please wait a moment Hello, I'm happy to answer your questions.

If the light keeps flashing, it means that there is a problem with the handbrake system of his car. Because he is a hall mechanical handbrake, this light has been flashing, which means that there is a control switch of this handbrake light on this manipulator, and it may be that there is a problem with the control switch of this handbrake light below him. Or if there is a problem with the line, you can mainly check these two locations.

There is also a need to check the body control module, and it will also be seen that the lines below the leak and the body control module are connected, and these aspects need to be checked.

The holo light of Kaiyue is the transmission snow mode light, which flashes as a fault warning light when the gearbox fails, and the gearbox is locked in 3rd gear, and the gearbox has a significant impact. This fault is an electrical fault, you need to check the gear switch, transmission wiring harness, transmission control unit and other electronic control components or go to the 4S shop to repair.

The hold light of Kaiyue car is the transmission snow mode light, which flashes as a fault indicator light when the gearbox fails, and the gearbox is locked in 3rd gear, and the gearbox has a significant impact. This fault is an electrical fault, and you need to check the gear switch, transmission wiring harness, transmission control unit and other electronic control components.

HOLD is the fault light of the gearbox, flashing indicates that the gearbox control is faulty, and the gear is still garbled, it can be determined that the gear switch is damaged, and it is OK to replace the gear switch.

There is a "hold" button next to the automatic gear, after pressing, the yellow "hold" can be displayed on the dashboard, this is not a common problem or failure, but a function, this function is the gear hold mode, as long as you press this button, keep in 3rd gear, the speed is about 65 horses, which is used when driving in snow or road slippery and maintaining a constant speed. If you don't use it, click Close.

The HOLD light is always on, which means that the gearbox is in hold mode, and at this time, you only need to press the HLOD button next to the gear mechanism again to release it.

If the HOLD light is flashing, it indicates that the transmission system is faulty, including the transmission and the transmission computer module. Go to 4S detection, and you will definitely be able to detect the fault.

When the gearbox fails, it will enter the protection module, and when driving, there will definitely be a jitter phenomenon when shifting gears.

Excuse me, has your car been repaired now? How much did it cost? Mine is exactly like you, now.

Transmission sensor failure. Just change the sensor.

It should be a common problem with gear switches

Go to the repair shop to do the following decoding, see what the problem is, and then deal with it.

There is a voltage driver module on the width indicator lamp that is damaged. Or the voltage caused by poor line contact, unstable will appear width indicator light flashing, it is recommended to go to the 4S store for testing.

The role of the indicator lamp

Temporarily stop on the side of the road at night, to light up the width indicator light on the road with the street light is very bright, as a driving light, do not need to turn on the headlights in the rain, snow and fog or other poor sight time, open the wide lights to remind the passing vehicles, the car width indicator lights are mainly used to indicate the existence of the car and the general width, so that other vehicles can judge when meeting and overtaking.

Width indicator light is a warning sign of the lamp, used to remind other vehicles to pay attention to the indicator light, installed at the edge of the top of the car, which can indicate both the height of the car and the width, the safety standard stipulates that the car height is higher than three meters must be installed width indicator light, the width indicator light is turned on in low visibility conditions, such as dawn and dusk haze weather in the evening.

When it is drizzling, it can be turned on separately to remind other vehicles to judge the position and contour of the car, which plays a warning role. Since when the headlights are turned on, the marker lights will also be turned on, so in the daily driving process, many people do not have the habit of showing the lights, they either turn on the headlights directly, or they are not at dawn and dusk.