The wireless router lights on both sides, and the mobile phone can be connected, but what happens if

If your phone cannot access the Internet after connecting to a wireless network, it is recommended that you first check whether other devices can connect to the wireless network normally. If only your device cannot, it is recommended that you do the following:

2.If a networking software is not available, it is recommended to check whether the function is set to prevent individual applications from using Wi-Fi. Operation:

Settings - (More Connection Settings) - Traffic Monitoring - Manage Application Traffic (Limit Application Traffic) - View Software That Can't Access the Internet - Check WLAN (Note: Some models support the function of managing application traffic).

3.If the browser and networking software are not available, it is recommended to forget the network and try to reconnect: slide down the top curtain of the screen - press and hold the WLAN icon to enter the WLAN setting interface - tap and hold the name of the wireless network - forget (forget the network Delete network), and then search for the connection again.

4.If it doesn't work, please turn off your phone and restart it.

5.Try connecting to a different wireless network.

6.If you still can't use Wi-Fi, it is recommended to back up the data (contacts, messages, **, etc.) in your phone and try to restore the machine to factory settings.

If the problem persists, it is recommended that you bring the purchase invoice, repair card, and mobile phone to a Samsung service center for inspection.

If your phone shows that you are connected to a wireless network, but you still can't access the Internet, Samsung phones generally recommend the following:

1.Turn off your phone, restart your router, and reconnect to your wireless network.

2.Confirm the transmission bandwidth of the router (the supported router supports 40 MHz, we recommend setting it to 20 MHz) and check whether the router network is normal.

3.Confirm that IP address filtering is set up in the router MAC address filtering.

4.If you still can't Wi-Fi the Internet, it is recommended to try the static IP mode: Settings --WLAN - Select a wireless hotspot - Show advanced options - Tick - Swipe down the screen - IP Settings - Static - IP address Gateway.

5.Connect to another router and try to taste.

6.Try to restore factory settings after backing up your phone's important data.

If the problem still exists, it is recommended to bring the purchase invoice, three-guarantee voucher and mobile phone to the service center for testing by the engineer.

Summary. The router light is normal and can be connected to the wireless network, but the reason for the failure to access the network is analyzed

The router lights are all normal. Mobile phones can also be connected to Wi-Fi. Just can't use it? What's going on.

The router light is normal and can be connected to the wireless network, but the reason for the failure to access the network is analyzed

Cause 1: The network line is faulty. [Home Network Environment Wiring]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer. 2. No cat (modem):

Network cable --- router WAN port; The LAN port of the router --- a computer. Cause 2: The router has an incorrect Internet setting and you need to reconfigure the router.

Solution: Reset the router and set dialing again.

How to reset the router: Method 1: There is a button [RESET] button on the back of the router, press and hold for 5 seconds, and the indicator light on the router panel will be off and then on, which means that the router is reset.

Set router dialing: The computer IP and DNS settings are automatically obtained.

1. Open the browser - enter the general router address is this or view the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin). 2. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter your Internet username and password according to the prompts, and save. 3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection].

The next step is to select [Auto Connect], Save, and Exit. 4. If you want to use wireless wifi, your router must have a wireless routing function, in the settings, turn on the wireless routing function, here, the wireless signal signal is changed to one of them.

The strongest anti-interference. You can also set a password for your Wi-Fi connection.

After the router is set up, you still can't access the Internet even if the Internet access and password are correct, for the following reasons:

1. If the broadband is in arrears or expires, you need to pay or renew it in time. 2. If the network cable is loose, both ends of the network cable need to be plugged in tightly. 3. If the device is used for a long time, the optical modem and computer can be powered off for 10-20 seconds, and then the power supply can be turned on and restarted.

Summary. Generally, the mobile phone cannot search for wifii, and there are usually two reasons: 1. The mobile phone cannot connect to the wifi due to the wireless router device, which is the reason why the vast majority of mobile phones cannot connect to wifi.

So in this case, you need to first check if your router has created a MAC filter address. The specific operation method is to add the MAC address of the mobile phone into the rules, and then open it in this order: open settings - WLAN on - WLAN settings - menu key - advanced - MAC address.

Generally, mobile phones can't search for wifi, and there are usually two reasons: 1. The mobile phone can't connect to wifi due to the wireless router device, which is the reason why most mobile phones can't connect to wifi. Due to the privacy and anti-rubbing behavior of the router, it will filter MAC addresses to a certain extent.

The specific operation method is to add the MAC address of the mobile phone into the rules in the early line, and then open the liquid type in this order: open settings - WLAN on - WLAN settings - menu key - advanced - MAC address. So you can search for wifi.

Can you elaborate on that a little bit more?

Generally, mobile phones can't search for wifi, and there are usually two reasons: 1. The mobile phone can't connect to wifi due to the wireless router device, which is the reason why most mobile phones can't connect to wifi. Due to the privacy and anti-rubbing behavior of the router, it will filter MAC addresses to a certain extent.

The specific operation method is to add the MAC address of the mobile phone into the rules in the early line, and then open the liquid type in this order: open settings - WLAN on - WLAN settings - menu key - advanced - MAC address. So you can search for wifi.