Vivo X5M stuck on boot screen? 5

The phone can't be turned on: it has been left in the boot interface without change, and you can't enter the system, only a vivo logo is displayed, or you can use your own memory card to swipe to restore your own system.

Here's how:

Find a computer that can connect to the Internet, enter the official website service to search for your model, and then go to the resource**in**firmware upgrade package of the corresponding model, put it in the root directory of the memory card, and if you don't have a computer, you can find a mobile phone with a network and put it on the memory card to surf the Internet**Oh.

In the case of power off, press and hold the power button and the volume + button at the same time until the following screen appears. Press the volume up or down button to move the position up or down, select Recovery Mode, and then press the Power on button to enter.

After the above operations, enter the interface shown below. Select Wipe Data Factory Reset and Wipe Cache Partition in red, and press the Power button to clean up the data.

After cleaning up, it will still return to this interface drop,Up and down keys to select Apply update apps with system from ex sdcardBecause the upgrade package of the official website** is placed in the external memory card,Press the boot button to confirm。

Next, enter the interface below to start swiping, and wait for about a few minutes.

After the above steps, you will return to the current page by yourself,Boot key to select reboot system now is the meaning of rebooting into the system,The following will start normally。

After a little waiting, my phone has finally entered the system.

You can do this by following the steps below:

1. You can connect the original charger to charge for 10 minutes, and then press and hold the power button for more than 10 seconds to force the phone to restart;

2. Press and hold the lock screen button and the volume plus key at the same time in the shutdown state, release the lock screen key when the vivo interface appears for the first time and continue to press and hold the volume plus key until you enter recovery mode, first select wipe data factory reset to erase all data and restore factory settings; wipe cache partition clears the cache. After the interface jumps, select Reboot System Now to reboot your phone.

It is recommended to try the following methods to see if it can be turned on:

1.Press and hold the power button for 10 seconds to force restart the phone.

2.You can try charging for 20 minutes, then press and hold the power button for 10 seconds to see if it can turn on (the phone is completely out of power and recharged, there is no prompt).

3.When the phone is turned off, press and hold the volume up button and the power button at the same time for 3 to 4 seconds, after the vivo phone logo appears on the phone, let go of the button to enter recovery mode, first select wipe data factory reset, select wipe cache partition after completing the waiting interface jump, and select reboot system now to restart the phone immediately after completion. (Doing this will lose all the data on your phone (except the data on the TF card), including installed apps, **books, text messages, etc.) When there is no other way to solve the problem, use this and use it with caution.

If the above methods still can't be turned on or the mobile phone has important data, it is recommended to take the mobile phone to the local after-sales inspection and processing, and the after-sales technicians will deal with it. You can go to vivo official ** to check the address of the after-sales service center, and check the after-sales address of the province and city where you are located.

1. The boot line is abnormal: use an external power supply to supply power to the mobile phone, use the electric meter to detect whether the indication has changed, if there is no change, it is likely that the boot line is broken or the boot button is not in good contact.

2. The power supply circuit of the battery is abnormal: use the external interface to supply power to the mobile phone, see if it returns to normal when it is turned on, if it is normal, it is determined that the power supply circuit of the mobile phone is abnormal.

3. The IC of the mobile phone power supply is abnormal: test the test point of the peripheral circuit of the power supply IC according to the circuit schematic diagram to see whether the test value is normal.

4. The system clock and reset of the mobile phone are abnormal: you can use the dual total oscilloscope to detect the CPU power supply of the mobile phone to check whether the waveform in the reset is correct.

5. Problems with logic circuits: that is, faults in the circuit version of mobile phones, which can generally be solved by repair welding.

6. Software conflict: The installed software does not match the system of the mobile phone, which may also cause the mobile phone to fail to boot, you can connect the mobile phone to the computer to delete the program.

7. If it is a copycat mobile phone, then I estimate that it can't be turned on because the chip inside is burned, or some of the small parts inside are loose, but this situation will only appear if you drop it, the chip burns may be because you charge it for too long, burn the chip, if the battery has electricity, that is these aspects, if it is a brand-name mobile phone, such as Nokia, Motorola. These situations are rare, unless it is artificial, if it is a brand-name smartphone, and it is not used improperly, it is a software problem, it may be a system crash, or because of the mobile phone poisoning caused by software damage, generally this can only go to the maintenance office, however, I think the biggest possibility is caused by static electricity, it is recommended that you do not open the blind repair, or go to the maintenance office!

Please press and hold the power button for more than ten seconds to force a restart to try, if it still doesn't work, it is recommended that you try Shuangqing, you can press and hold the volume up button + open the fierce ruler judgment button at the same time, and wait for the word vivo to appear on the phone, let go of the power button, continue to press and hold the volume up button until the robot interface appears, select wipe

data/factory

reset, press the boot button again, wait for the interface to jump, and then select rebootsystem

Just restart your phone. Doing this will result in the loss of all the data on your phone, including installed apps, books, text messages, etc. If it still doesn't work, please also change your mobile phone to our after-sales service center to deal with it, the address of the after-sales service center and ** can enter the homepage of the official website - service - network query - inquiry.

Hello,What about the situation you are talking about,It should be a suggestion caused by the crash of the mobile phone system.,On the computer side**Flash master or flash wizard,Through。 Flash Master or Flash Wizard, connect the phone to enter the flash mode, and select the suitable one. You can flash the software to flash the machine.

Before flashing, you can also try the lattice processing first. The method of lattice machine is to press the volume plus button and the power button at the same time according to the tone to enter the grid machine mode. Select Clear All.

After double clearing,Restart to see if you can enter the boot page,If it's still stuck on the boot page,Then you can only flash the machine。