How can 4 computers and one broadband make the IP of the computer different

Updated on technology 2024-03-24
13 answers
  1. Anonymous users2024-02-07

    2.Install the tool on your phone computer.

    3.After opening the tool, select Single Window - IP Address.

    4.Click Start Connect to complete the steps to modify the IP address.

  2. Anonymous users2024-02-06

    Hello, the IP address of the check is your external (extranet) IP address, which is of course the same.

    Please check the private IP address of each computer in the local connection (network properties), I think they must be different.

  3. Anonymous users2024-02-05

    It would be nice to add a router.

  4. Anonymous users2024-02-04

    Computer Mobile Phone Professional IP Modification Solution Steps:

    Now in fact, there are a lot of IP change software on the market, or you have to choose according to your actual needs, depending on whether you need stable and efficient or a large number of IP, on the whole, search for Kyushu. IP software, ** installation.

    Select the IP point to connect and you're good to go.

    It is relatively simple to operate, connecting IP to most cities in the country, and millions of IP can be switched at will.

    It supports one-click IP switching and timing IP switching, which should meet your needs.

  5. Anonymous users2024-02-03

    How to change the computer to the national dynamic IP.

    Step 2: Register.

    Step 3: Connect the destination node you want to modify.

    Step 4: Open the browser to query the IP after you modified the IP to solve your problem.

    There are many dynamic IP lines, and you can freely choose the time to replace them.

  6. Anonymous users2024-02-02

    The IP address of the external network is the same, but the IP address of the internal network is different. You all use the same external IP to surf the Internet, but the ports you use are different.

    The IP address and port number are used for computer communication.

    When you surf the Internet, the router will randomly give your computer a port number, and it will be different.

    For example, you all use a route to access the Internet (the IP address outside the network is as follows, if it is the IP address of the internal network.

    The IP of the computer is.

    The IP of the b computer is.

    The IP of the C computer is.

    You all use an external IP (address) to surf the Internet.

    The router converts in both directions, and there is a corresponding mapping table in which the data is given to whom: 565656<--

    These port numbers are the ones that the router assigns to your computer.

    You are all the same IP on the Internet. In other words, the IP address of the Internet is the same, which is NAT (Internet Address Translation).

  7. Anonymous users2024-02-01

    1 The IP address of the Internet is the same, that is, the broadband operator only gives you an IP address, and others see you on the Internet as the same IP address, just like an Internet café.

    2. The internal IP is not the same (with a router), the external network is connected to the router first, and the router assigns an internal IP to each machine connected to it, and the internal IP is not related to the external IP.

    3 If one of them is a **server, and the other is connected to the Internet through a **server, then there is only one IP, which does not require a router.

  8. Anonymous users2024-01-31

    It may or may not be the same, depending on which way you use to access the Internet! One cat plus one router, the IP is not the same! For the hub connected directly, the IP is not the same internally and externally!

  9. Anonymous users2024-01-30

    Not necessarily!!! A host may have two IP !! on an existing networkBut it depends!!

    There is also a possibility!! Exists in the form of a dynamic IP!!

  10. Anonymous users2024-01-29

    For example, host A ip: subnet mask.

    Host B IP: Subnet mask.

    Then the main network segment.

  11. Anonymous users2024-01-28

    The first subnet mask:

    Gateway: DNS is automatically obtained.

    Second Subnet Mask:

    Gateway: DNS is automatically obtained.

    The third subnet mask:

    Gateway: DNS is automatically obtained.

  12. Anonymous users2024-01-27

    You can simply use a rabbit.。 IP to solve, one-click connection to all the multi-open game windows assigned different IP addresses, and then you can safely play the game, skip the IP limit, and detect the problem.

    The game has more professional window IPs, and you can try to use rabbits to modify the IP address of each multi-window with one click. IP converter.

    You can choose more than 800 cities across the country to connect with IP lines at will.

    Support single page, single window, single IP

    After connecting, the IP address will be automatically changed, and the dynamic IP and static IP will be supported, and mobile phones, computers, emulators, and virtual machines can be used.

  13. Anonymous users2024-01-26

    It's very simple.

    An IP converter software is required.

    I'm under 618ip**.

    One-click IP change, as well as dynamic IP, you can change the line in seconds, you can register for free.

Related questions
4 answers2024-03-24

The network segmentation of the router, which is one of the most important functions of the router, can divide the entire network into different network segments according to actual needs. >>>More

5 answers2024-03-24

To buy a router, follow these steps:

1. The working group should be the same. How to do it: Right-click on My Computer Properties Computer Name to change the workgroup. >>>More

18 answers2024-03-24

One iTunes can only recognize one phone, and if two are plugged in at the same time, of course, only one phone can be recognized.

11 answers2024-03-24

It can't be divided equally, or the router provides the function of limiting the uplink and downlink speed, and generally enters the routing settings. Either ** person automatically limits the up and down speed. You are one of the nets, and you consult with each other.

7 answers2024-03-24

How computers were inventedThe world's first electronic computer was born in 1946 at the Smithsonian Institution in Washington, USA, and her name was "Eniake", the world's first computer was invented in World War II. Because it was used to draw ballistics maps for the U.S. Navy. It's the size of half a football field, contains 500 miles of wires, and uses electromagnetic signals to move mechanical parts. >>>More