Do you still need a card after unlocking the locked version of iphone6?

Updated on number 2024-03-22
9 answers
  1. Anonymous users2024-02-07

    1. The lock does not actually mean that the mobile phone is locked, this lock refers to the network lock, and you can't use other brands of SIM cards before unlocking, simply put, the locked iPhone must use the SIM card of the designated operator, and the general locked iPhone is used by foreign network operators, and domestic users must add a card accessory to the SIM card if they want to use it. Of course, the iPhone has a locked version, which is cheaper than the unlocked version.

    2. Although it is said that after the card is attached, you can use the iPhone with a lock, but you need to be very careful during use, do not upgrade, once upgraded, the iPhone will become the legendary white apple. This is because every cracked iPhone with a locked version of the card corresponds to the corresponding system version, for example, from iOS5 to iOS6, the original card is invalid, and you can only wait for the unlocked card of the new system version to upgrade, so it is very inconvenient to use.

  2. Anonymous users2024-02-06

    Locked iPhone6 card is generally better with HEICARD and GPP.

    The use of the card must correspond to the iOS version, and iOS cannot be upgraded casually after use, otherwise the card will be invalid after the upgrade.

    In addition, the locked version of the iphone6 unlock does not necessarily have to use a card, it is better to unlock with a dual-mode card, if the mobile phone card meets the conditions, it is recommended to use a dual-mode card to unlock.

  3. Anonymous users2024-02-05

    Due to the lock of the phone, if you directly insert the Chinese mobile phone card, it will not be effective, but in China, there is a card This artifact can make the Japanese version of the iPhone use the domestic network. Insert the card under the mobile phone card and insert it into the mobile phone together with the mobile phone card to achieve the unlocking signal, such as GPP and Chaoxue. After unlocking the Japanese version of the iPhone 6, you can use the mobile 4G.

    1. Connect your phone to the power supply, let the phone be in a charging state, because the phone needs a certain amount of power during the activation process, and at the same time, prepare the phone Nano SIM card.

    2. Press the power button to turn on, it may take a little longer to turn on the phone for the first time, wait a little longer, hello appears to activate the phone.

    3. Now start to set up the mobile phone, language settings, select Chinese Simplified Chinese, and select China as the country.

    4. The following is the keyboard settings, you can choose Chinese Simplified Chinese nine-square grid or choose full keyboard, depending on your personal preferences, you can also change it later.

    5. Enter the wireless network settings and log in to a wireless network.

    6. Start the location service, this is not very important, you can start it when you use it in the future.

    <>8. Now it's time to create a password and Touch ID.

    <>9. Successful activation, welcome to use.

  4. Anonymous users2024-02-04

    The mobile phone card is the case that the mobile phone cannot be unlocked with software.

    Unlock tool used.

    There are two types: internal and external.

    Make your phone available for calls to and from a card other than the SIM card specified by your carrier**Typical price is between 50 and 100.

  5. Anonymous users2024-02-03

    The card is attached to the SIM card placed in the card slot.

  6. Anonymous users2024-02-02

    Here's how to use the iPhone unlock card:

    1. Prepare a mobile phone, prepare a card sticker, the SIM card must be cut into a small card, and then cut off a piece with nail clippers before it can be put into the card sticker;

    2. Insert the card into the mobile phone and turn it on, a prompt will pop up after turning it on, click to accept, wait for about 10 seconds, open the dial keypad, press 112, and then press the call button to start calling 112;

    3. Press the dial button, and the end button should be pressed immediately, and it cannot be connected or replayed, otherwise it needs to be restarted and restarted. After that, go to Settings, turn on Airplane Mode, and wait;

    4. After about 10 seconds, a prompt box will pop up, prompting that the SIM card is not installed, and turn off the airplane mode after confirmation. Then turn on and off the airplane mode here, this time you don't have to wait, you can switch it directly, after turning off the airplane mode this time, the phone will automatically search for the operator;

    Unlock the card] Apple iPhone unlock card is currently two kinds, the old one is a small chip in the upper right corner** updated the production process, changed to a thin film card, made of European crystal source, the use of ultra-thin, fast processor RGKNSE, this small chip is recorded in a variety of operator information, the size of the card and the size of the SIM card is the same, very thin one, and the SIM card you want to use coincides, put it in the mobile phone, you can use it.

    Precautions for card installation] You need to cut the card, and you need to cut off a small piece of the SIM card according to the prompts, otherwise the card will not be installed. Be very careful in the hands-on process, to cut off another piece on the already small SIM card, the more convenient tool is the nail clippers, if you are confident in your hands-on ability, sharp scissors are also an alternative.

  7. Anonymous users2024-02-01

    Here's how to use the sticker:

    1. Combine the card and the card sticker and put it into the phone.

    Second, then turn on the machine, which will let you choose:

    Language – Simplified Chinese;

    Country – China;

    Connect to wifi;

    3. The Activated Carrier interface appears. The IMEI code is on the back of your phone, select the corresponding carrier, and then click Accept.

    Fourth, after choosing, pull out the card tray, take the guide card and replace it with your own card.

    The difference between iPhone with lock and no lock:

    The locked version of the iPhone means that there is a network lock, similar to a domestic contract machine. The Japanese version of the iPhone with a lock is in addition to the Japanese one.

    Carriers, can not use other carriers' mobile phone cards, this is called the Japanese version of the locked iPhone.

    And the card is equivalent to an unlocking tool. When the mobile phone is turned on, it will read the content of the card chip, and the chip has the operator's information, which will make the mobile phone mistakenly think that it is using a Japanese softbank card, and you can search for the signal.

  8. Anonymous users2024-01-31

    The mobile phone card is the case that the mobile phone cannot be unlocked with software.

    Unlock tool used.

    There are two types: internal and external.

    Make your phone capable of making and receiving calls with a card other than the SIM card specified by your carrier**.

    The general price is between 50 and 100.

  9. Anonymous users2024-01-30

    Here's how to do it: Prepare to insert the SIM card into your phone.

    Step 2: Because the activation of the mobile phone needs to be connected to Apple's activation server, it is necessary to connect the mobile phone to the network, here to connect to the wireless as an example.

Related questions
7 answers2024-03-22

Clear language depends on clear thought.

15 answers2024-03-22

There is basically no difference, you need to unlock the card in the mainland, and the supported networks are the same after unlocking.

11 answers2024-03-22

The maximum number of people to connect is 5.

The steps to limit the number of people in a hotspot are as follows: >>>More

12 answers2024-03-22

You put it in airplane mode and then just turn on the wifi to see if you have the same problem. If there is still one, it can only mean that the software adaptation is not good, after all, ios11 has not been officially released.

11 answers2024-03-22

1. The output voltage of the back clip battery is 5V, which is the same as the output voltage of the charger, so it will not be harmful to the mobile phone battery. In fact, after the power from the back clip battery enters the mobile phone, the mobile phone itself regulates the voltage corresponding to the mobile phone battery. >>>More