What are the paving acceptance specifications for wood flooring?

1. Testing performance.

Many people don't know much about the indicators that need to be achieved in the acceptance of sports wood flooring. If you only rely on visual recognition, it is obvious that it lacks enough convincing. You can use professional tools to test the paved sports wood flooring to test whether its professional performance is up to standard.

2. Shock absorption detection.

The shock absorption performance test of sports wood floor is mainly to see how well the impact force generated by the athlete is absorbed by the floor after colliding with the wooden floor in the process of high-speed movement. We can compare this impact force with the impact force that falls on the cement site to get the desired result.

3. Bending detection.

Bending detection of sports wood flooring. One is the vertical curvature, which is the downward effect of the impact force generated by the athlete after falling to the ground on the sports floor to see the deformation of the floor. Only within the scope of the standard.

The other is the investigation of the curvature of the plane. We test the deformation of the athlete in contact with the solid wood sports floor in a certain space.

4. Topcoat quality assessment.

What is the effect of sports wood floor brush protective paint? Whether the texture of the sports wood floor at the end of the paving is clear, and whether the color of the sports wood floor paint is bright, are all evaluated from a professional point of view.

<> after paving the floor, consumers often do not know which aspects to start from when accepting, and only find out when there are disputes over quality problems, there are many problems that can be found in advance and solved as soon as possible, so the correct acceptance of the pavement quality of the wooden floor is an important method for consumers to protect their own rights and interests.

The acceptance standards for wood flooring in China have not yet been formulated, but the quality inspection and evaluation standards for senior building decoration projects in Beijing can be used as a reference for consumer acceptance (this standard is applicable to wood boards and parquet wood board ground engineering).

Ensure that the variety, specification, grade, quality and moisture content of wood materials should comply with the relevant provisions of the Code for Construction and Acceptance of Wood Structure Engineering (GBJ206-83).

2. The surface layer of various wooden boards and the base layer must be firm and not loose (or sticky firm), and the glue used for pasting must meet the design requirements.

Inspection method: observe, step on or tap with a small hammer to check, and check the variety of glue and the certificate of conformity.

Note: The hollow drum area is not more than 1 8 of a single board surface, and each one does not exceed 5% of the total number of spot checks, can not be counted.

Basic item 1, the surface quality of the wood surface layer shall comply with the following provisions:

Qualified: The surface layer of the wooden board is smooth and smooth, without planing marks, ballast and burrs, the pattern is clear, and the color of the oil film surface layer is uniform.

Excellent: The surface layer of the wooden board is smooth and smooth, without planing marks, ballast and burrs, the pattern is clear and beautiful, and the color of the oil film surface layer is consistent.

Inspection method: observation, hand touch and foot inspection.

2. The quality of the joints of the surface layer of the wooden board shall meet the following requirements:

1) Wood board surface.

Qualified: The gap is tight, the joint position is staggered, and the surface is clean.

Excellent: the gap is tight, the joint position is staggered, the surface is clean, and the seam is straight and square.

2), parquet wood surface layer.

Qualified: The seams are tight, the nails are firm, the surface is clean, and there is no obvious glue overflow in the bonding.

Excellent: tight joints, firm nails, clean surface, no glue overflow in bonding, reasonable and beautiful plate arrangement, consistent fringe width and periphery.

Tester Stroke: Observational examination.

3. The waxing quality of wood flooring must meet the following requirements:

Qualified: The joints are tight, the surface is smooth, and the height and thickness of the wall are consistent.

Excellent: the joints are tight, the surface is smooth and smooth, the height and wall thickness are consistent, the seam arrangement is reasonable and beautiful, the upper mouth is straight, and the cutting angle is accurate.

Inspection method: Observation and examination.

4. The waxing quality of wood flooring must meet the following requirements:

Qualified: Wood floor hot hard wax, wipe soft wax, wax sprinkle cloth evenly without revealing the bottom, consistent color, clean surface.

Excellent: hard wax on the wooden floor, soft wax, wax sprinkled evenly without showing the bottom, smooth and bright, consistent color, uniform thickness, clear wood grain, clean surface. Inspection method: observation, hand touch inspection.

Allowable deviation items.

The allowable deviation and inspection method of the wood floor surface layer shall be in accordance with the provisions of Table (1).

Allowable deviations and test methods for the surface layer of wood flooring (Table 1).

Tuba Rabbit** provides you with "various decorations**, 1-4 local decoration companies, and 3 sets of decoration design plans" for free, and also briefly answers that there is a decoration strategy to avoid pits! Click on this link: Stopper

You can get it for free

We all know that after the completion of each link of the decoration, it needs to be accepted, one is to check the quality of the completion of the decoration, but in order to better the next step of construction, the same is true for the acceptance of the wooden floor, we all know that the decoration is the first water and then electricity, the first wall and then the ground, the installation of the wooden floor means that the decoration is almost in the middle and late stages, so what is the acceptance of the wooden floor, let's take a look at the precautions for the installation of the wooden floor.

1. When installing the wooden floor, the drainage problem should be fully considered, and the slope should be paid attention to, so that the drainage is smooth and there is no water accumulation, and the floor tiles should be closely combined with the floor drain.

2. When accepting the installation of the wooden floor, it is necessary to pay attention to the gaps that must be left so that the wooden floors can be expanded, pay attention to the uniformity of the gaps, check whether the installation of the wooden floors is loose, whether the oak is firm and stable, and avoid problems such as cracking of the wooden floors after the temperature rises.

3. After 48 hours of wooden floor installation, you should go back and forth at the door to see if there is any sound, if the pavement is not in place, it is easy to hear the sound. At the same time, when the sun is good, look at the surface of the wooden floor, and then touch it with your hands, it should be smooth, no cracks, missing corners, etc., very straight between each other, feel how uniform the paint is, and whether it has been damaged, such as scratches, scratches, etc.

4. In order to avoid businesses from changing the concept, the wooden floor meets the requirements of the environmental protection bridge and noisy hall, but some auxiliary materials of the wooden floor and the Minyin baseboard are not environmentally friendly, and the formaldehyde content of these auxiliary materials is even higher than that of the wooden floor, which damages the health of consumers. After we finished the renovation, we sniffed the room for smell.

The above is about the wood floor acceptance specifications, wood floor installation precautions, I hope to help you wood floor acceptance and installation, if you want to know more about home decoration knowledge, please pay attention to the home improvement network.

Paving wooden flooring is a very important item in home decoration, whether the worker pavement is a standard, it is difficult for us laymen to understand, so the following provides some technical essentials about pavement specifications and paving for your reference.

1.Specifications for paving wooden floors.

The environment of paving wood floors requires the completion of the decoration and construction of the ceiling and interior walls. The doors, windows and glass are all well installed. The interior wall root has been drilled, and the wooden mold with the baseboard is paved below, and the spacing and position of the wooden mold are accurate.

The operating procedures of the wood floor real paving method are: base cleaning, elastic line, leveling, drilling, installation of embedded parts, installation of raw floor, leveling, planing, nailing floor, leveling, planing, nail baseboard, planing, sanding, painting. Blind in the mausoleum.

The operating procedures of the empty paving method of wooden floors are: base cleaning, elastic line, drilling and installation of pre-paved parts, ground moisture-proof, waterproof treatment, paving wooden keel, pad insulation layer, elastic line, nailed wool floor, leveling, planing, nailing wooden floor, leveling, planing, leveling, planing, installing baseboards, planing, sanding and painting.

The quality requirements of wood floor pavement are: the surface layer is planed and smoothed, without obvious planing marks, stubble, burrs, and clear patterns. The floor pavement is in the right direction, the joints are tight, the joints are staggered, and the surface is clean.

The color of the clear oil surface layer is uniform, the surface is flat, there is no warping, and there is no empty drum sound when the seam is close to the baseboard. Pavement according to the standard procedure can meet the requirements of qualified quality.

2.Technical essentials of wood floor construction.

Timber paving is a highly professional construction project. In addition to operating according to the standard procedures, wood floor paving also needs to pay attention to the following specific problems:

1) After all wooden floors are transported to the construction and installation site, they should be unpacked and stored indoors for more than a week, so that the wooden floors can be paved only after the temperature and humidity of the living room are adapted.

2) Before the wooden floor is paved, it should be selected to eliminate the unqualified products with obvious quality defects. Pavement with consistent color and pattern in the same room, with slight quality deficiencies but not affecting the use, can be placed at the bottom of the bed, cabinet and other furniture, and the thickness of the board in the same room must be consistent. When purchasing, it should be purchased at a time according to the loss of the actual pavement area increased by 10.

3) The keel of the paved wooden floor should be made of pine, fir and other tree species that are not easy to deform, and the back of the wooden keel and baseboard should be treated with anti-corrosion.

4) Paving solid wood flooring should avoid construction under heavy rain, rainy and other climatic conditions. During the construction, it is best to change the sensitivity to ensure the stability of the indoor temperature and humidity.

5) The wooden floor of the same room should be paved at one time, so sufficient auxiliary materials should be prepared, and the finished product should be protected in time to prevent oil collapse, juice and other pollution surfaces. The glue extruded during installation should be wiped off in time.